These are the messages generated by Pioneer and Voyager.
Pioneer Messages
All Provisioning Agent messages are prefixed with IDFTP. The next character after IDFTP defines the message type followed by 3 digit number that uniquely identifies the message in its specific sub-genre.
Table H-1 Pioneer Messages
Message ID | Message Text | Message Type |
---|---|---|
IDMP000I | Pioneer starting | Informational |
IDMP001I | Pioneer Input Parameters are OK | Informational |
IDMP001E | Pioneer Input Control File is Empty | Error |
IDMP002I | Pioneer Detects IDF-Build <Build info> | Informational |
IDMP003I | Pioneer Detects TCPIP Jobname <value> | Informational |
IDMP004I | Pioneer Detects TCPIP IP Address of <value> | Informational |
IDMP005I | Pioneer Detects TCPIP IP PORT of <value> | Informational |
IDMP006I | Pioneer Detects Debugging is <value> | Informational |
IDMP007I | Pioneer Detects Audit log is <value> | Informational |
IDMP009I | Pioneer Detects Encryption Enabled | Informational |
IDMP010I | Pioneer Detects Encryption Disabled | Warning |
IDMP011I | Pioneer Detects CPUID <value> | Informational |
IDMP012I | Pioneer Detects Sysplex Sysname <value> | Informational |
IDMP013I | Pioneer Detects LPARNAME AS <value> | Informational |
IDMP014I | Pioneer Detects Country Code of <value> | Informational |
IDMP015I | Pioneer Detects Job Wait Time Of <value> Secs | Informational |
IDFTPI001 | Pioneer Detects RECON wait time of <value> Mins | Informational |
IDMP020I | Pioneer Accepting Messages on <IP/Host> | Informational |
IDMP020A | Pioneer Operator has Issued a Shutdown Command | Warning |
IDMP021I | Pioneer has a Write Delay of <value> ms | Informational |
IDMP030I | Pioneer INITAPI was successful | Informational |
IDMP031I | Pioneer GETCLIENTID was successful | Informational |
IDMP032I | CLIENT NAME/ID is <value> | Informational |
IDMP033I | CLIENT TASK is <value> | Informational |
IDMP035I | Pioneer BIND SOCKET was successful | Informational |
IDMP036I | Pioneer Listening port is <value> | Informational |
IDMP037I | Pioneer Listening Address is <IP/Host> | Informational |
IDMP038I | Pioneer Listen Socket Call was successful | Informational |
IDMP041I | Pioneer Socket Accept was successful | Informational |
IDMP041E | Pioneer Socket Accept was not successful RC: <value> | Error |
IDMP048I | Pioneer LDAP Connection Timed out | Informational |
IDMP049I | Pioneer Has Been Idle for 60 Mins | Informational |
IDMP050A | Pioneer Closing IP Connection | Warning |
IDMP051I | Pioneer Close Socket Call was Successful | Informational |
IDMP052I | Pioneer Shutdown Socket Call was Successful | Informational |
IDMP054I | Pioneer Received TOPS Recon Request from LDAP | Informational |
IDMP055I | Pioneer Recon Processing Started | Informational |
IDMP056I | Pioneer Recon Processing Ended | Informational |
IDMP057I | Pioneer Recon Processing Successful | Informational |
IDMP070I | Pioneer <File> Is Now Open | Informational |
IDMP071I | Pioneer <File> Is Now Closed | Informational |
IDMP071A | Pioneer has cleared the <FileName> FILE | Informational |
IDMP070E | Pioneer Could Not Open <File> RC: <value> | Error |
IDMP080I | Pioneer Job Submitted to the Intrdr | Informational |
IDMP100I | PIONEER (IN) MSGS PROCESSED IS <value> | Informational |
IDFTPI002 | Pioneer Message (READ) Bytes <value> | Informational |
IDFTPI003 | Pioneer Message (WRITE) Bytes <value> | Informational |
IDFTPI004 | Pioneer Debug Log Files Created <Logfile> | Informational |
IDMP102I | Pioneer Terminating | Informational |
IDMP200E | Pioneer Startup Parameter Error <value> | Error |
IDMP201I | Pioneer <Parmout-msg> Status = Good | Informational |
IDMP300I | *Debug* - <Debug-msg> | Debug |
IDMP401E | *Parms* - <Message> <Status> <text> | Informational/ Parm |
IDMP303I | Pioneer Job Wait was modified by the operator to <value> secs | Informational |
IDMP304I | Pioneer Recon Wait time was modified by the operator to <value> secs | Informational |
IDMP305I | Pioneer Debugging was Turned <status> | Informational |
IDMP306I | Pioneer Received Status Query and is Alive | Informational |
IDMP500I | *AUDIT* - <Func> <CMD> <ACID> <STAT> <INFO> | Audit |
IDMP500I | *HEADER* - <Func> <CMD> <ACID> <STAT> <INFO> | Audit |
IDMP500I | Generic | Audit |
IDMP620I | *RADMIN* <value> | Informational |
IDMP630I | *CLISTI* <value> | Informational |
IDMP600I | *EXPMSG* <value> | Informational |
IDMP605I | Pioneer waiting for the LDAP to respond Timeouts = <value> times | Informational |
IDFTPE006 | INITAPI ERRNO =156 - ERROR MSG - EMVSINITAL z/os Unix systems services process initial failure, review TSS USS Segment TSS OMVS Segment incorrectly defined Pioneer will terminate | Error |
IDFTPE007 | INITAPI ERRNO = 10102 - Missing SEZATCP. Loadlib Verify SEZATCP. Loadlib is either in the linklist or as a steplib Pioneer will terminate | Error |
IDFTPE008 | TCPN parameter in incorrect Must be the TCPIP STC Name Pioneer will terminate | Error |
IDFTPI056 | Setting next addrinfo address as <value> | Informational |
IDFTPI057 | Address of Output Next Addrinfo as <value> | Informational |
IDFTPI058 | ADDRESS OF INPUT-ADDRINFO-PTR IS <value> | Informational |
IDFTPI059 | NTOP-Family | Informational |
IDFTPI060 | PIONEERX : CLOSE RETCODE= <value> | Informational |
IDFTPW004 | MAX-TIMEOUTS TRIGGERED, GOING TO EXIT | Warning |
IDFTPI061 | SHUTDOWN RECEIVED FROM POLLOPER | Informational |
IDFTPI062 | STATUS CHECK RECEIVED FROM POLLOPER | Informational |
IDFTPI063 | DEBUG=<Y/N> RECEIVED FROM POLLOPER | Informational |
IDFTPI064 | PIONEER DEBUG ALL READY <ACTIVE/DEACTIVATED> | Informational |
IDFTPI065 | <RWAIT/JWAIT/VALUE>= RECEIVED FROM POLLOPER | Informational |
IDFTPI066 | SOCK# <value> is ON/OFF | Informational |
IDFTPI067 | <AUTH/CHG/ACTION> <value> ON USERID <value> RC= <value> OOPS(1) = <value> OOPS(2) = <value> OOPS(3) = <value> | Informational |
IDFTPE009 | CLIST Queue not found being created by system Rexx. Pioneer will retry allocate in 2 seconds | Error |
IDFTPE010 | Error Calling Program <value> | Error |
IDFTPE011 | Pioneerx is Ending due to Errors | Error |
IDFTPE012 | PARM-ERROR TYPE <value> | Error |
IDFTPE013 | DEBUG = Y and Debugout paramater is invalid must be DEBUGOUT=SYSOUT , CLASS(n) <OR> DEBUGOUT=FILE Please fix parameter and restart Pioneer | Error |
IDFTPI068 | DEBUGOUT Alloc OK | Informational |
IDFTPE014 | Debugout free failed | Error |
IDFTPE015 | DEBUGOUT spun to class <value> Debugout free failed | Error |
IDFTPW005 | ** Invalid parameter in Control file ** | Warning |
IDFTPI069 | PARMFLE:STATUS <value> | Informational |
IDFTPE016 | Pioneer control file must have control records in it see admin manual for details. Pioneer will abend | Error |
IDFTPW006 | Pioneer Control File is empty | Warning |
IDFTPE017 | Pioneer will Terminate | Error |
IDFTPE018 | Creation OF : <dsname> Failed RC <value> | Error |
IDFTPE019 | Open of Debugout failed RC: <value> | Error |
IDFTPE020 | Duplicate <ACTION/CREATE/ADDTP/REMOVE> encountered and will not be processed | Error |
IDFTPE021 | (PIONEER) ddname INCLR/RECONJCL/FILE is empty populate as described in Manual - Pioneer will abend with RC=100 | Error |
IDFTPE022 | TEMPLIB1 WAS NOT FREED OK | Error |
IDFTPE023 | CLIST QUEUE NOT FOUND BEING CREATED IN BATCH. PIONEER WILL RETRY ALLOCATE IN 5 SECONDS. | Error |
IDFTPI070 | PROCESSED <rclist value> | Informational |
IDFTPI071 | RECONIN/LISTIN Closed ok | Informational |
IDFTPI072 | RECONIN records read <value> | Informational |
IDFTPI073 | RECONIN File now Empty | Informational |
IDFTPW007 | ALIAS FUNCTION TYPE NOT SUPPORTED | Warning |
IDFTPW008 | FILE-FREE TYPE NOT SUPPORTED | Warning |
IDFTPI074 | Pioneer Processing <value> | Informational |
IDFTPI075 | DYN-PARMS : <value> | Informational |
IDFTPI076 | Pioneer - Dynamic Alloc Of <libname> was OK | Informational |
IDFTPE024 | Pioneer - Dynamic Alloc of <libname> Failed BPXWDYN RC : Return code. Post Processing For <Libname> Membername <memname> will not be executed | Error |
IDFTPI077 | Pioneer free of <libname> Was OK | Informational |
IDFTPI078 | PIONEER - SYSPUNCH NOW CLOSED SUCCESSFULLY | Informational |
IDFTPI079 | PIONEER - CLOSE OF ' <LIBNAME> WAS SUCCESSFUL | Informational |
IDFTPE025 | BAD SYSREXX-CALL RC : <value> | Error |
IDFTPI080 | GOOD SYSREXX-CALL RC : 0 | Informational |
IDFTPI081 | Dynamic Alloc : <dsn value> FREED | Informational |
IDFTPE026 | Dynamic Alloc : <dsn value> FAILED | Error |
IDFTPE027 | PIONEER COBOL FUNCTION CEE3DLY FAILED | Error |
IDFTPI082 | *** SUBMISSION JCL START *** | Informational |
IDFTPI083 | *** SUBMISSION JCL END *** | Informational |
IDFTPE028 | PIONEER - DYNAMIC FREE OF <LIBNAME > FAILED BPXWDYN RC: < RETURN-CODE> ALLOCATED PDS < LIBNAME > CAN NOT BE FREED | Error |
IDMP400I | *Parms* - <parms-value> | Informational/ Parm |
Voyager Messages
All Reconciliation Agent messages are prefixed with IDFTV. The next character after IDFTV defines the message type followed by 3 digit number that uniquely identifies the message in its specific sub-genre.
Table H-2 Voyager Messages
Message ID | Message Text | Message Type |
---|---|---|
IDMV000I | Voyager Reconciliation Agent Starting | Informational |
IDFTVI001 | Voyager is Executing from an APF Authorized Library | Informational |
IDMV000E | Voyager is Not Executing from an APF Authorized Library | Error |
IDFTVI002 | Voyager Found TPSS Security Subsystem | Informational |
IDFTVI003 | Voyager Found Required Storage Subpool | Informational |
IDMV002I | Voyager Build Level is at <Build Info> | Informational |
IDMV004I | Voyager Detects (TCPIP) Jobname <value> | Informational |
IDMV005I | Voyager Detects (TCPIP) IP Address of <value> | Informational |
IDMV006I | Voyager Detects (TCPIP) IP PORT <value> | Informational |
IDMV007I | Voyager Detects Encryption is ON | Informational |
IDMV011I | Voyager Detects Encryption | Informational |
IDMV012I | Voyager Detects Debugging is ON | Warning |
IDMV013I | Voyager Detects Debugging is OFF | Informational |
IDMV015I | Voyager Detects Country Code of <value> | Informational |
IDMV016E | Voyager Detects Bad Hostname of <value> | Error |
IDMV016I | Voyager Detects Hostname of <value> | Informational |
IDMV019E | Voyager Initialization of TCP API Failed RC: <value> | Error |
IDMV019I | Voyager Initialization of TCP API was Successful | Informational |
IDMV020E | Voyager TCPIP Socket Descriptors Exceeded - Fatal Error | Error |
IDMV021E | Voyager Initialization of PTON failed RC: <value> | Error |
IDMV021I | Voyager Accepting Messages on <IP-Addr> (OR) <hostname.com> | Informational |
IDFTVI004 | Voyager Initialization of PTON was Successful | Informational |
IDMV025I | Voyager Connected to Gateway Server | Informational |
IDMV025I | Connect messages will not be displayed | Warning |
IDMV025I | Connect messages will be displayed | Informational |
IDMV070I | Voyager <File DDname> is Now Open | Informational |
IDMV071I | Voyager <File DDname> is Now Closed | Informational |
IDMV070E | Voyager could not open <File DDname> RC: <value> | Error |
IDMV001E | Voyager Input Control File is Empty | Error |
IDMV100I | Voyager Shutdown Started | Informational |
IDMV103I | Voyager has Ended with Non-Zero Return Code | Warning |
IDMV104I | Voyager Sent Messages nnnnn Received Messages nnnnn | Informational |
IDMV105I | Voyager Sent Bytes nnnnn Subpool Messages nnnnn | Informational |
IDMV110I | Voyager Reconciliation Agent has Terminated | Informational |
IDMV111I | Voyager has Ended with Zero Return Codes | Informational |
IDMV130I | Voyager Probed Server <n> Tries | Informational |
IDFTVI005 | Voyager Run Startup To Allocate Sp231 | Informational |
IDMV206E | Voyager Cachesav Open for Input Failed RC <value> SEE SYSLOG | Error |
IDFTVE001 | Voyager Cachesav Close Failed RC: <value> SEE SYSLOG | Error |
IDMV206I | Voyager Cachesav Open For Output | Informational |
IDMV207I | Voyager CACHESAV Open for Input | Informational |
IDMV208I | Voyager Reads nnnnn CACHE Messages | Informational |
IDMV209I | Voyager Wrote nnnnn CACHE Messages | Informational |
IDFTVI006 | Voyager Cacehsv Closed OK | Informational |
IDMV210I | Voyager CACHESAV Cleared for Usage | Informational |
IDMV151I | Voyager DNS Request <Hostname.com> | Informational |
IDMV152I | Voyager IP Connect Request <IP-Addr> | Informational |
IDMV200E | Voyager Config Parm Error - <value> | Error |
IDMV202E | Voyager no Storage Token Found | Error |
IDMV202I | Voyager Unable to Connect to new IP/Port | Informational |
IDMV203E | Voyager Quiescing Because of the Subpool Not found | Error |
IDMV204E | Voyager Subpool 231 Cannot be Found | Error |
IDMV300I | *Debug* - <Debug-msg> | Debug |
IDMV401I | *DEFAULT* <PARM - TEXT> | Informational |
IDMV601I | Voyager IP-FUNC (GETCLIENTID/SOCKET/PTON/SHUTDOWN/ READ/WRITE ERRNO (n) | Informational |
IDMV602E | Voyager Connection Failed to LDAP - ERRNO(nnnnnn) | Error |
IDMV603I | *CLISTI* - <value> | Informational |
IDMV500I | *HEADER*[|GENERIC|AUDIT] - <Func> <CMD> <ACID> <STAT> <INFO> | Audit |
IDMV604I | Write Successful - MSG=(A=x,P=xxxx,L=nnnnnn,U=xxxxxxxx) | Informational |
IDMV999T | Write Good TRANS-CTR: nnnnn | Informational |
IDMV999E | Voyager is Abending due to Bad Parms | Error |
IDFTVI007 | Please review Voyager SYSLOG | Error |
IDFTVE002 | Voyager is Abending | Error |
IDMV001E | Voyager has Abended | Error |
IDFTVI046 | Voyager detects TCP Write is Off | Informational |
IDFTVE017 | Voyager detects Encryption is OFF. Voyager now terminates | Error |
IDFTVI047 | Cachesave Had : <value> | Informational |
IDFTVE018 |
*--- IDMVINFO --- * 1 VERIFY CACHESAVE HAS THE CORRECT Z/OS FILE ATTRIBUTES - LRECL=32 AND DSORG=PS 2 VERIFY HAS THE CORRECT HLQ FOR THE DATASET AND TOP-SECRET PERMISSIONS - PIONEER MUST BE ABLE TO READ AND WRITE TO THE DATASET |
Error |
IDFTVE019 |
VOYAGER CONTROL FILE MUST HAVE CONTROL RECORDS IN IT . SEE ADMIN MANUAL FOR CONTROL RECORD FORMAT AND SEQUENCE FILE IS EMPTY VOYAGER WILL NOW ABEND |
Error |
IDFTVW004 | Cache overflow | Warning |
IDFTVW005 | Bailing out now | Warning |
IDFTVE020 | Error on <opening/closing/action> cachesave. Cachesave <open/close/ action> error status <value> | Error |
IDFTVI048 | FILE FOUND | Informational |
IDFTVI049 | * IP SWITCH DETECTED * | Informational |
IDFTVI050 | HEARTBEAT - VOYAGER IS OK | Informational |
IDFTVI051 | DEBUGGING - WILL NOW BE ACTIVE | Informational |
IDFTVW006 | DEBUGGING - WILL NOW STOP | Warning |
IDFTVW007 | <-- LDAP GATEWAY ERROR ------------> ------ <TCP-ADDR-IN> HAS NOT RESPONDED IN <RETRY-SECS> SECS -- VOYAGER HAS EXCEEDED RETRY COUNT ---- | Warning |
IDFTVI052 | --------- BUILD INFO ----------- | Informational |
IDFTVI053 | --------- BUILD INFO END ----------- | Informational |
IDFTVE021 | Voyager Timer Failed | Error |
IDFTVI054 |
*--- 050-GETHOST-BYNAME BEFORE ---* SOKET-GETHOSTBYNAME: <SOKET-GETHOSTBYNAME> GET-NAMELEN : <GET-NAMELEN> GET-NAME : <GET-NAME> GET-HOSTENT : <GET-HOSTENT> GET-RETCODE : <GET-RETCODE> |
Informational |
IDFTVI055 |
*--- 050-GETHOST-BYNAME AFTER ---* SOKET-GETHOSTBYNAME: <SOKET-GETHOSTBYNAME> GET-NAMELEN : <GET-NAMELEN> GET-NAME : <GET-NAME> GET-HOSTENT : <GET-HOSTENT> GET-RETCODE : <GET-RETCODE> |
Informational |
IDFTVI056 |
*--- EZACIC08 BEFORE CALL --* GET-HOSTENT : <GET-HOSTENT> GET-NAMELEN : <GET-NAMELEN> GET-NAME : <GET-NAME> HOST-ALIAS-COUNT: <HOST-ALIAS-COUNT> HOST-ALIAS-SEQ : <HOST-ALIAS-SEQ> HOST-ALIAS-LENGTH: <HOST-ALIAS-LENGTH> HOST-ALIAS-VALUE: <HOST-ALIAS-VALUE> HOST-ADDR-TYPE : <HOST-ADDR-TYPE> HOST-ADDR-LENGTH: <HOST-ADDR-LENGTH> HOST-ADDR-COUNT : <HOST-ADDR-COUNT> HOST-ADDR-SEQ: <HOST-ADDR-SEQ> HOST-ADDR-VALUE: <HOST-ADDR-VALUE> |
Informational |
IDFTVI057 |
*--- EZACIC08 AFTER CALL --* GET-HOSTENT : <GET-HOSTENT> GET-NAMELEN : <GET-NAMELEN> GET-NAME : <GET-NAME> HOST-ALIAS-COUNT: <HOST-ALIAS-COUNT> HOST-ALIAS-SEQ : <HOST-ALIAS-SEQ> HOST-ALIAS-LENGTH: <HOST-ALIAS-LENGTH> HOST-ALIAS-VALUE: <HOST-ALIAS-VALUE> HOST-ADDR-TYPE : <HOST-ADDR-TYPE> HOST-ADDR-LENGTH: <HOST-ADDR-LENGTH> HOST-ADDR-COUNT : <HOST-ADDR-COUNT> HOST-ADDR-SEQ: <HOST-ADDR-SEQ> HOST-ADDR-VALUE: <HOST-ADDR-VALUE> |
Informational |
IDFTVW008 | EZACIC08 FAILED | Warning |
IDFTVI058 |
*--- SOKET-NTOP BEFORE ---* SOKET-NTOP: <SOKET-NTOP> NTOP-FAMILY: <NTOP-FAMILY> HOST-ADDR-VALUE: <HOST-ADDR-VALUE> PRESENTABLE-ADDR: <PRESENTABLE-ADDR> PRESENTABLE-ADDR-LEN: <PRESENTABLE-ADDR-LEN> |
Informational |
IDFTVI059 |
*--- SOKET-NTOP AFTER ---* SOKET-NTOP: <SOKET-NTOP> NTOP-FAMILY: <NTOP-FAMILY> HOST-ADDR-VALUE: <HOST-ADDR-VALUE> PRESENTABLE-ADDR: <PRESENTABLE-ADDR> PRESENTABLE-ADDR-LEN: <PRESENTABLE-ADDR-LEN> |
Informational |
IDFTVE022 | DYNAMIC ALLOC : <dsn> FREE FAILED BPXWDYN RC : <value> | Error |
IDMV400I | *PARM* - <parm-txt> | Informational/Parm |