| Oracle® Retail Warehouse Management System Implementation Guide Release 15.0 E68108-01 |
|
 Previous |
 Next |
| Oracle® Retail Warehouse Management System Implementation Guide Release 15.0 E68108-01 |
|
Previous |
Next |
This chapter describes the system control parameters.
Table 7-1 lists the different System Control Parameters.
|
Note: SCP VALUE under the SCP TYPE column indicates that there are a distinct set of values available for the SCP. |
Table 7-1 List of System Control Parameters
| SCP_NAME | DESCRIPTION | SCP TYPE | SCP MIN VALUE | SCP MAX VALUE | AREA |
|---|---|---|---|---|---|
|
3rd_party_routing |
When set to Y, an FTP interface sent to a third party routing package is used. |
SCP VALUE |
|
|
SHIPPING |
|
able_to_ship_level |
Security level to enable the F9 ship key in the shipping form. |
NUMBER |
1 |
9 |
SHIPPING |
|
ac_cycle_count_priv |
Sets the privilege level to allow RF users to perform Audit Counts.If your privilege level is equal to or greater than this SCP you can perform Audit Counts. |
NUMBER |
0 |
9 |
INVENTORY MANAGEMENT, CYCLE COUNT |
|
adjust_pick |
Enables the F7 adjust key on the RF picking windows. |
SCP VALUE |
|
|
DISTRIBUTION |
|
ahl_log |
Log Activity History Log 0: No AHL Logging, 1: AHL Logging through SQL insert. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
allow_predist_create |
Determines if RWMS can create Pre-distribution allocations. When set to Y, RWMS allows the creation of PREDIST stock orders in the Create Stock Order window under the Distribution Planning Module. |
SCP VALUE |
|
|
DISTRIBUTION |
|
allow_trble_putaway |
When set to Y, RWMS allows putaway to storage with associated trouble codes. |
SCP VALUE |
|
|
PUTAWAY |
|
app_cls_commit_each |
Determines if a commit is to be performed after applying/unapplying each item or location class. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
apply_qa_wip |
Determines if a QA WIP needs to be applied. |
SCP VALUE |
|
|
WIP CODES |
|
appointment_window |
The number of days (past and future) to allow appointments to be active. Used in the Schedule Appointment window and purge_ appointments_b.sh. |
NUMBER |
1 |
999 |
ADMIN - SETUP, RECEIVING |
|
apprv_indirect_activity_priv |
Specifies the privilege threshold below which the GUI Indirect Activities window works in USER mode. If priv of logged in user is greater than or equal to scp value then the window shows up in Manager Mode. |
NUMBER |
1 |
9 |
ADMIN - SETUP, TASK MANAGEMENT |
|
appt_asset_default |
Sets the default value for receiving appointments for the capture of asset tracking. Specifies how you are prompted to enter assets during receiving. During: you are prompted for asset quantities after each item is received that is associated with asset tracking. End: enter at end before closing appointment. Start: user prompted to enter assets at beginning of appointment. |
SCP VALUE |
|
|
ADMIN - SETUP, RECEIVING |
|
appt_bulk_def |
Sets bulk flag default on the Appointment Detail window. |
SCP VALUE |
|
|
RECEIVING |
|
appt_cal_major_scale |
Sets the default major time axis in the Appointment Calendar. |
SCP VALUE |
RECEIVING |
||
|
appt_cal_minor_scale |
Sets the default minor time axis in the Appointment Calendar. |
SCP VALUE |
RECEIVING |
||
|
appt_update_allowed |
For Brazil, this SCP must always be set to N. When set to N, RWMS does not allow you to add or delete line items but allows you to modify or add different casepacks as long as the total unit quantity per line item equals the original downloaded quantities. When set to Y, normal appointment detail modifications are allowed. |
SCP VALUE |
|
|
RECEIVING |
|
asset_tracking |
For transport asset tracking. When enabled, RWMS supports tracking of transport asset inventory and enables the messaging from RWMS to communicate asset movements to the host. When Asset tracking is set to Y, RWMS tracks transport assets. |
SCP VALUE |
|
|
ADMIN - SETUP, RECEIVING |
|
assortment_wip_code |
WIP code applied when inbound container has an assortment item. Parent Item with child SKUs. |
WIP CODE |
|
|
WIP CODES |
|
ats_calc_incl_dist |
When set to Y, distributed inventory is kept in the Available to Sell bucket in the output generated by inv_disposition_upload.sh script. |
SCP VALUE |
|
|
INVENTORY MANAGEMENT |
|
auto_induct |
When set to Y, groups assigned to the first pack wave have the Active Pick flag set to Y, indicating that this pack wave is staged in the UPS for picking. If put_to_order is enabled, allocation data is sent to the UPS for only those allocations deemed active within the UPS. If put to destination is enabled, all allocations are downloaded at one time. |
SCP VALUE |
|
|
DISTRIBUTION |
|
autopack |
Assigned name to the autopack sorter. |
STRING |
|
|
DISTRIBUTION |
|
back_order_flag |
Indicates whether to retain stock orders when the inventory is exhausted. Used in the distribution process. |
SCP VALUE |
|
|
DISTRIBUTION |
|
best_before_wip |
Used to automatically apply a WIP code to a container requiring a best before date (perishable indicator set in Item Master). |
WIP CODE |
|
|
WIP CODES, RECEIVING |
|
bld_mix_dest_sku_pal |
When set to Y, building of mixed destination pallets (Distributed) is allowed. |
SCP VALUE |
|
|
DISTRIBUTION |
|
blind_bulk_receiving |
When set to Y, RWMS generated Receiving labels do not print any container quantities or unit quantities on bulk container labels. It also does not pre-populate the carton quantity on the RF receiving window when receiving bulk pallets. When set to N, the carton and unit quantity appears on the labels and RF. |
SCP VALUE |
|
|
RECEIVING |
|
break_by_wip_con |
When set to Y, the distribution process creates separate Master Pick Labels for each group of WIP codes for conveyable cartons. |
SCP VALUE |
|
|
DISTRIBUTION |
|
break_by_wip_non_con |
When set to Y, the distribution process creates separate Master Pick Labels for each group of WIP codes for non-conveyable cartons. |
SCP VALUE |
|
|
DISTRIBUTION |
|
carton_store_putwy |
Default putway plan used for cases having an item with no putaway plan defined on the item master. |
PUTAWAY |
|
|
PUTAWAY |
|
case_pts_security |
Defines minimum user security level that can process a inventory adjustment without supervisor approval. Applies only to Case PTS. |
NUMBER |
1 |
9 |
INVENTORY MANAGEMENT |
|
cd_back_order_flag |
For Consumer direct picks it indicates whether to retain stock orders when the inventory is exhausted. Used in the distribution process. |
SCP VALUE |
|
|
DISTRIBUTION, CONSUMER DIRECT |
|
cd_bulk_pick_dropoff |
The bulk picking dropoff location for consumer direct picks. |
LOCATION |
|
|
LOC or LOC TYPE, PICKING, CONSUMER DIRECT |
|
cd_case_pick_dropoff |
The case picking dropoff location for consumer direct picks. |
LOCATION |
|
|
LOC or LOC TYPE, PICKING, CONSUMER DIRECT |
|
cd_consolidate_dropoff |
Location where the containers eligible for order consolidation can be staged before being moved to consolidation locations for each distro. |
LOCATION |
|
|
LOC or LOC TYPE, CONSUMER DIRECT |
|
cd_consolidate_flag |
Used in the stock_order table for consumer direct orders for virtual stores. If the stock order consume has the field consolidate as null, the default value will be populated from SCP into the stock order record. |
SCP VALUE |
|
|
ADMIN - SETUP, DISTRIBUTION, CONSUMER DIRECT |
|
cd_consolidate_processing_loc |
Location where the order consolidation is performed. Containers location is auto-updated to this location when scanned on the Order Consolidation window. |
LOCATION |
|
|
LOC or LOC TYPE, CONSUMER DIRECT |
|
cd_fcp_pick_dropoff |
The fcp picking dropoff location for consumer direct picks. |
LOCATION |
|
|
LOC or LOC TYPE, CONSUMER DIRECT |
|
cd_labeled_picking |
For consumer direct,when set to Y, RWMS generates a picking label packet and a report. When set to N, RWMS assumes labeless picking and only generates a report. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING, CONSUMER DIRECT |
|
cd_labeled_tote |
For consumer direct,if set to Y, labels for Unit picks prints even when labeled_picking = N. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING, CONSUMER DIRECT |
|
cd_pick_by_loc_flag_con |
For consumer direct,when set to Y, RWMS is picking by location and allows mixing of conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of conveyable cartons of varying destinations onto a single pallet during Container Picking. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING, CONSUMER DIRECT |
|
cd_pick_by_loc_flag_non |
For consumer direct,when set to Y, RWMS is picking by location and allows mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING, CONSUMER DIRECT |
|
cd_unit_pick_dropoff |
The unit picking dropoff location for consumer direct picks. |
LOCATION |
|
|
LOC or LOC TYPE, CONSUMER DIRECT |
|
cd_xzone_case_picking |
For consumer direct case picking,when set to Y, the distribution process creates pick across multiple zones for the same distribution. When set to N, cross-zone picking, for the same distribution, is denied. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING, CONSUMER DIRECT |
|
cd_xzone_unit_picking |
For consumer direct unit picking,when set to Y, the distribution process creates pick across multiple zones for the same distribution. When set to N, cross-zone picking, for the same distribution, is denied. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING, CONSUMER DIRECT |
|
clear_user |
When set to Y, clears the user name from the C pick allowing another user to proceed with operation. When set to N, the user name is still associated with the pick and that individual must finish the operation. |
SCP VALUE |
|
|
INVENTORY MANAGEMENT, PICKING, TASK MANAGEMENT |
|
cltp_prg_delay |
The amount of time, in seconds, to retain the Container Label to Print file before clearing it. |
NUMBER |
1 |
600 |
PRINTER - LABELS |
|
company_nbr |
Company number to send to PPS. |
NUMBER |
0 |
9 |
ADMIN - SETUP |
|
consolidate_pend_wip |
When set to Y, RWMS allows the consolidation of WIP codes, when building pallets. |
SCP VALUE |
|
|
WIP CODES |
|
container_format |
Indicates that the container identifier number is compliant with UCC128 or is generic with embedded destination ID (DEFAULT). |
SCP VALUE |
|
|
PRINTER - LABELS |
|
cs_rsv_loc_type |
User Defined location type for case reserve. |
LOC TYPE |
|
|
LOC OR LOC TYPE |
|
cs_rsv_priority |
Priority used in distribution to pull merchandise from case. |
NUMBER |
1 |
3 |
DISTRIBUTION - PLANNING |
|
cubiscan |
Set to Y when using a TCP/IP connection to a Cubiscan device. |
SCP VALUE |
|
|
RECEIVING |
|
cycle_count_period |
Number of days to cycle count the entire DC. Used in schedule_cycle_count_b.sh. |
NUMBER |
1 |
365 |
INVENTORY MANAGEMENT, CYCLE COUNT |
|
cycle_count_type |
Defines how the DC wants to count inventory, either by item, location or zone. Used when schedule cycle count runs in cron (System Scheduled Cycle Count). |
SCP VALUE |
|
|
INVENTORY MANAGEMENT, CYCLE COUNT |
|
DC_dest_ID |
Destination ID of the DC. Must be in the Ship Dest table. Used in reports (for DC return address) and to show what containers are stock (dest_ID=DC). |
DEST ID |
|
|
ADMIN - SETUP |
|
debug_flag |
Used in determining the data value inserted into the Error Log error message field during exception handling. |
SCP VALUE |
|
|
TECHNICAL |
|
def_appt_type |
Allows you to specify the most frequently used receiving type in the Create Appointment Header window reducing selection time. Valid Values: 0 = Blank, 1 = FPR with Details,, 2 = FPR without Details, 3 = PO, , 4 = ASN, 5 = NSC, 6=ASN/NSC. |
SCP VALUE |
|
|
ADMIN - SETUP, RECEIVING |
|
def_cc_min_tol_qty |
Only used when the CC MIN TOLERANCE QTY is not defined on the Item Master. Allows you to set a cycle count minimum unit tolerance quantity at the global level to determine whether an inventory adjustment is allowed immediately or an Audit Count must be performed. If the difference between the system count and cycle count exceeded the cycle count tolerance percent, then RWMS checks to see if the difference between the system count and cycle count is equal to or less than the minimum tolerance unit quantity. If the difference is equal to or less than the minimum unit quantity then RWMS immediately posts an inventory adjustment. If the difference exceeds the minimum unit quantity then RWMS marks that location for an Audit Count and does not make an inventory adjustment until the Audit Count is completed. |
NUMBER |
0 |
9999 |
INVENTORY MANAGEMENT, CYCLE COUNT |
|
def_cc_tolerance_pct |
Only used when the CC TOLERANCE PCT is not set on the Item Master. It allows you to set a cycle count tolerance percentage at the global level to determine whether an inventory adjustment is allowed immediately or an Audit Count must be performed. If the difference between the original system quantity and the cycle count quantity is within the tolerance percentage, it allows the inventory adjustment immediately. If the difference exceeds the tolerance percentage then check the def_cc_min_tol_qty. |
NUMBER |
0 |
999 |
INVENTORY MANAGEMENT, CYCLE COUNT |
|
def_random_putaway |
Default putaway plan for random replenishment. |
PUTAWAY |
|
|
PUTAWAY |
|
def_rollback_alloc |
Sets the rollback allocation flag on the stock order header for RWMS generated stock orders. |
SCP VALUE |
|
|
DISTRIBUTION |
|
def_sa_priority |
Sets the priority of the stock allocation detail records if the host management system does not download a priority or the value is NULL. |
NUMBER |
0 |
9 |
DISTRIBUTION |
|
def_ship_label_size |
Default label size to be printed from the RF Print Ship Label window. The label size field is modifiable by the user (toggle). |
SCP VALUE |
|
|
PRINTER - LABELS, SHIPPING |
|
def_so_priority |
Sets the priority of the stock order header records if the host management system does not download a priority or the value is NULL. |
NUMBER |
0 |
9 |
DISTRIBUTION |
|
def_task_priority |
This SCP specifies the default PRIORITY of a task for an activity, when a priority value is not defined for an activty. |
NUMBER |
1 |
99 |
ADMIN - SETUP, TASK MANAGEMENT |
|
def_task_priority_threshold |
This SCP specifies the default PRIORITY THRESHOLD of a task for an activity, when a priority threshold value is not defined for an activty. The threshold value specifies when proximity takes precedence over priority. |
NUMBER |
1 |
99 |
ADMIN - SETUP, TASK MANAGEMENT |
|
def_work_day_end |
Default working day end. Used in Working Days Editor. |
TIME |
|
|
ADMIN - SETUP |
|
def_work_day_start |
Default working day start. Used in Working Days Editor. |
TIME |
|
|
ADMIN - SETUP |
|
default_carton_group |
Carton group used in cartonization if none is defined for the item. |
CARTON GROUP |
|
|
ADMIN - SETUP |
|
default_cc_plan |
Default cycle count plan to be set during item master download if none is specified. |
CC PLAN |
|
|
INVENTORY MANAGEMENT, CYCLE COUNT |
|
default_dc_cont_type |
Default pallet size used for the dimension and cube calculation during receiving processing and case and forward case picking. |
CONT TYPE |
|
|
RECEIVING, PICKING |
|
default_dist_type |
Distribution Type for the Select Stock Order window. The field is modifiable to the user. |
SCP VALUE |
|
|
DISTRIBUTION |
|
default_kitting_wip |
WIP code when creating an item that is defined as a kit. |
WIP CODE |
|
|
WIP CODES |
|
default_language |
Used to display the labels in the RF Login window. This is also used to print the labels in Label Reports. |
LANGUAGE |
|
|
ADMIN - SETUP |
|
default_order_level |
Type of saved query for order selection. FULL: Every line in query has to match. ORDER: If any line matches, RWMS shows all distribution lines. LINE: Only distributions that match display. |
SCP VALUE |
|
|
DISTRIBUTION - PLANNING |
|
default_order_type |
Determines how downloaded stock orders are processed. WAVE uses the pre-defined Shipping Schedule and proceeds without intervention. AUTOMATIC does not require destinations to have a pre-defined Shipping Schedule, but does proceed without intervention. MANUAL allows intervention by selecting orders to be included in a wave. PO: allocation of merchandise is tied to a specific PO. PREDIST: allocations that have pre-distributed merchandise. |
SCP VALUE |
|
|
DISTRIBUTION - PLANNING |
|
default_putaway |
Default putaway plan to be set during item master download if none is specified. |
PUTAWAY |
|
|
PUTAWAY |
|
default_trailer_cube |
Default size of a trailer. Used in the Schedule Appointment window when a new trailer is scheduled. Used to calculate and display the percentage filled of a trailer on the Shipping Status. |
NUMBER |
100 |
1E+07 |
SHIPPING |
|
default_ups |
Default Unit Pick System code for Item Master download. |
UNIT PICK |
|
|
ITEM SETUP |
|
delete_pfl |
When set to Y, and unit quantity in the from location is 0, RWMS deletes the location record once the merchandise moves out. User override is provided on the FPL Move window. |
SCP VALUE |
|
|
ACTIVE - RANDOM, INVENTORY MANAGEMENT |
|
deposit_item_detail |
For transport asset tracking. When deposit_ item_detail is set to Y, RWMS itemizes the deposit assets based on predefined relationships in all inventory messages (receipts, inventory adjustment, return to vendor, shipments, inventory balance). When set to N, RWMS does not communicate the deposit assets with the content item in inventory messages. When set to N, it is assumed that the host system can calculate the deposit assets. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
dflt_labeled_rcving |
Defaults the labeled flag on the appointment header record. When set to Y, RWMS creates formatted labels. When set to N, RWMS expects you to provide generic labels. This flag is editable on the appointment header. |
SCP VALUE |
|
|
ADMIN - SETUP, RECEIVING |
|
display_item_id |
Used in the multi-item UPC functionality. If set to Y, item information, which matches the UPC code, displays when the item_id is scanned. When set to N, only the UPC code displays in the field. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
display_standard |
When this parameter is set to Y, the user can invoke RF Labor Standard Review window to review the performance against system calculated labor standard. When this parameter is set N, the user will not be allowed to invoke the RF Labor Standard Review window. |
SCP VALUE |
LABOR MANAGEMENT |
||
|
distrib_unfin_wip |
When set to Y, RWMS allows allocation of merchandise from a pallet that has unfinished WIP codes associated with it. |
SCP VALUE |
|
|
DISTRIBUTION, WIP CODES |
|
distribute_partial |
When set to Y, RWMS processes partial distribution of a dye lot. The maximum amount of a single dye lot is distributed even if only a partial fulfillment of the order. If N, the distribution is skipped. |
SCP VALUE |
|
|
DISTRIBUTION |
|
drop_off_convey |
Suggested drop-off location for pallet and case picking for conveyable merchandise. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
dynamic_random_slot |
Determine whether distribution should create a random slot for active picking when needed. |
SCP VALUE |
|
|
ACTIVE - RANDOM |
|
enable_kitting |
When set to Y, the Distribution process builds Kit Build directives for Master Items that have a Stock Allocation but no Inventory to satisify the order. |
SCP VALUE |
|
|
PROCESS, DISTRIBUTION |
|
enable_labor_mgmt |
When this parameter is set to Y, RWMS will calculate labor standards for any activity that has a defined Labor Code and Labor Management Enabled is set to Y. When this parameter is set to N, RWMS will never calculate labor standards even when an activity has a defined Labor Code and Labor Management Enabled is set to Y or N. |
SCP VALUE |
LABOR MANAGEMENT |
||
|
entry_limit |
Maximum adjustment quantity on a unit basis per user. |
NUMBER |
1 |
9999 |
ADMIN - SETUP, INVENTORY MANAGEMENT |
|
exceed_capacity |
Allows chutes to be overfilled during the waving process. |
SCP VALUE |
|
|
DISTRIBUTION - PLANNING |
|
exception_cont_type |
Default container type used during cartonization if no defined container types hold items. |
CONT TYPE |
|
|
ADMIN - SETUP |
|
exceptions_stage |
Area specified in building (location) where exception packages are sent for consolidation. Used in an automated sorter environment/configuration. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
fcp_random_act_stg |
Staging location for replenishments to random forward case locations. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
fcp_random_dest_id |
Destination ID for replenishments to random forward case locations. |
DEST ID |
|
|
ADMIN - SETUP, INTERNAL DEST ID |
|
first_time_sku |
WIP code applied to first time SKU containers during receiving. |
WIP CODE |
|
|
WIP CODES, RECEIVING |
|
fixed_replen_wave |
When set to Y, RWMS groups all replenishment picks into Wave 1. When set to N, RWMS associates replenishment picks with the wave that originated the need. |
SCP VALUE |
|
|
DISTRIBUTION - PLANNING |
|
FNC1_ASCII |
Designates the end of string character that is used to determine the last character of variable length fields in EAN 128 bar codes used during receiving. |
STRING |
|
|
ADMIN - SETUP, RECEIVING |
|
fpl_replen_dest_id |
Destination identifier used for replenishing of Forward Pick Locations when replenishment method is pre-planned. |
DEST ID |
|
|
ADMIN - SETUP, INTERNAL DEST ID |
|
fpr_conf_nbr_hrs |
Controls how long a FPR confirmation group stays open. Once the defined amount of time passes, RWMS removes a users ID and the group number from the pallets previously identified for receiving. The value is in hours and can accept decimals. |
NUMBER |
0 |
8 |
ADMIN - SETUP, RECEIVING |
|
fpr_limit_to_tihi |
Provides warnings when you exceed the defined Distribution Center TI/HI for a pallet when using Flexible Pallet Receiving.Valid Values: N= no warnings, C= soft warning, E = hard stop. |
SCP VALUE |
|
|
ADMIN - SETUP, RECEIVING |
|
fstsku_bypass_fl |
Indicates to conveyor system to weigh or not weigh a carton with first time SKU WIP applied. |
SCP VALUE |
|
|
PROCESS, RECEIVING |
|
hashing_algorithm |
Oracle alogorithm that will be used for hashing passwords and sending details from ADF to Oracle Forms. Select hashing algorithm availble in Oracle package DBMS_CRYPTO. For example, algorithm could be DBMS_CRYPTO.HASH_SH1. |
STRING |
|
|
SECURITY |
|
hold_first_time_sku |
WIP applied to all like containers for items where one container has first time SKU WIP applied. |
SCP VALUE |
|
|
PROCESS, RECEIVING |
|
hot_replen_fulfill |
Determines level at which hot replenishments are directed toward forward pick locations.If set to Y, it always directs hot Replens to forward locations if the entire container fits in the slot. If set to N, it only directs hot putaways if the forward location is below the replenishment level. |
SCP VALUE |
|
|
PUTAWAY |
|
hot_replen_putaway |
When set to Y, putaway looks for Unit Replenishment opportunities. |
SCP VALUE |
|
|
PUTAWAY |
|
hot_replen_recvg |
When set to Y, receiving allocation process looks for Unit Replenishment opportunities. When set to N, receiving allocation process functions as normal. |
SCP VALUE |
|
|
RECEIVING, PUTAWAY |
|
in_transit_loc |
Location of containers in process. Used in Move, Putaway, and Picking windows. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
incl_xdock_appt_zone |
Used during the appointment creation process to recommend the best fit door. When set to Y, RWMS checks for the existence of PREDIST stock allocations and uses the PTS induct zone for items with allocations. Based on the unit pick system code assigned to the item. If set to N, cross-dock items are ignored. |
SCP VALUE |
|
|
ADMIN - SETUP, RECEIVING |
|
interface_tcp_flag |
Indicates the use of a TCP/IP interface with a conveyor system. (Future RWMS use). |
SCP VALUE |
|
|
DISTRIBUTION |
|
kitting_activity_code |
Activity code associated with kitting against which statistics are collected. |
WIP CODE |
|
|
ACTIVITY CODE |
|
label_printer_font |
Specifies the desired font that should be used for label reports. |
STRING |
|
|
PRINTER - LABELS |
|
labelBulkReplnChild |
Use for bulk type picks for conveyable items only. When set to Y, bulk replenishment and bulk out the door picks, cases are labelled and dropped at the CONVEYOR with the exception of replenishment picks destined to Case PTS. When set to N, case labels are not printed and the pallet is dropped at the forward pick location when a replenishment pick and at the ship door location when an out the door pick. |
SCP VALUE |
|
|
DISTRIBUTION |
|
labeled_picking |
When set to Y, RWMS generates a picking label packet and a report. When set to N, RWMS assumes labeless picking and only generates a report. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING |
|
labeled_receiving |
When set to Y, RWMS creates formatted receiving labels. When set to N, RWMS expects you to provide generic receiving labels. |
SCP VALUE |
|
|
RECEIVING |
|
labeled_reserve |
When set to Y, RWMS tracks each container in reserve storage with a separate identifying label. When set to N, only master containers in reserve are labeled. |
SCP VALUE |
|
|
DISTRIBUTION, PUTAWAY, RECEIVING |
|
labeled_tote |
If set to Y, labels for Unit picks prints even when labeled_picking = N. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
labor_mgmt_log |
When this parameter is set to 1, RWMS will log the calculated labor standards in labor_mgmt_calc_log and labor_mgmt_calc_log_details tables. When this parameter is set to 0, RWMS will not log the calculated labor standards in labor_mgmt_calc_log and labor_mgmt_calc_log_details tables. |
SCP VALUE |
LABOR MANAGEMENT |
||
|
labor_mgmt_predict_log |
Log Labor Management Standards Predictive Calculation 0: No Logging, 1: Logging for Labor Code whose calculation log flag is Y |
SCP VALUE |
LABOR MANAGEMENT |
||
|
load_sequencing |
When set to Y, RWMS sorts picks with respect to the defined route/destination load sequence. When set to N, RWMS sorts according to distribution number sequence. |
SCP VALUE |
|
|
SHIPPING |
|
loading_max_nbr_cids |
Allows you to define how many pallets/containers can be scanned onto a forklift at one time for loading into an outbound trailer. |
NUMBER |
1 |
999 |
SHIPPING |
|
loc_brazil_auto_recv |
Only used when local_brazil = Y. When set to Y, RWMS automatically receives (in the background) containers not physically received. At the same time, offsetting entries are made in the inventory adjustment table to remove the inventory. RWMS views this merchandise as received and immediately lost. |
SCP VALUE |
|
|
RECEIVING, LOCALIZATION |
|
local_brazil |
Must be set to enable Brazil functionality. |
SCP VALUE |
|
|
LOCALIZATION |
|
log_interface_error |
Determines whether RWMS interface APIs log an error using the log_oracle_error function when an error occurs.Note: This must be set to N in an enterprise environment because of Oracle distributed processing and support for AUTONOMOUS TRANSACTIONS. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
LTC |
Unit Pick System Code associated to the RF Unit Picking (Stationary SKU) (LTC and ltc code refer to the same operation of Less Than Case picking). |
UNIT PICK |
|
|
DISTRIBUTION |
|
ltc_code |
Unit Pick System Code associated to the RF Unit Picking (Stationary SKU) (LTC and ltc code refer to the same operation of Less Than Case picking). |
UNIT PICK |
|
|
DISTRIBUTION |
|
ltc_staging_loc |
Location ID for replenishment drop-off going into LTC. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
max_gen_labels |
Defines the maximum quantity of generic labels that can be specified on the Reprint/Null Labels window. |
NUMBER |
1 |
2000 |
ADMIN - SETUP, PRINTER - LABELS |
|
max_inactive_time_in_aisle |
Specifies how long (since last activity for a user) to keep user in an aisle before it is assumed that he has walked out of the AISLE. The value is specified in minutes. |
NUMBER |
0 |
1440 |
ADMIN - SETUP, TASK MANAGEMENT |
|
max_invld_login_cnt |
The number of allowable times a user can incorrectly enter the password into the application. |
NUMBER |
2 |
9 |
SECURITY |
|
max_wave_nbr |
Maximum wave number allowed to be maintained in the distribution windows. |
NUMBER |
1 |
999 |
DISTRIBUTION - PLANNING |
|
max_wave_rows |
Maximum number of orders/rows that may be retrieved from a specific query. This number is used when you do not include the max number as part of a query. |
NUMBER |
1 |
10000 |
DISTRIBUTION - PLANNING |
|
metrics_purge_days |
Time duration used when deleting records in the distribution_metrics and unfilled_allocations tables based upon the wave end ts. |
NUMBER |
1 |
999 |
ADMIN - SETUP, DISTRIBUTION |
|
min_auto_wave |
The lowest wave number used by RWMS when assigning orders. RWMS assigns any orders retrieved by a specific query to the first wave with the status of AVAIL, type of MANUAL and greater than or equal to the min_auto_number. |
NUMBER |
1 |
999 |
DISTRIBUTION - PLANNING |
|
min_password_length |
The minimum number of characters required for a user password. |
NUMBER |
3 |
20 |
SECURITY |
|
mixed_dest_id |
Destination ID where containers holding merchandise for different destinations are sent for separation. |
DEST ID |
|
|
ADMIN - SETUP, INTERNAL DEST ID |
|
mixed_wip_stage_loc |
Location identifier at which containers with different WIP codes are staged for separation. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
mm_allow_distrib |
Determines whether or not distribution is allowed to distribute from manually marked locations. |
SCP VALUE |
|
|
DISTRIBUTION, INVENTORY MANAGEMENT |
|
MM_Cycle_Count_Priv |
User Privilege to execute Cycle Count on Manually Marked (MM) Location. |
NUMBER |
1 |
9 |
INVENTORY MANAGEMENT, CYCLE COUNT |
|
mm_sec_level_gu |
To restrict user from marking Cycle Count if user privilege level is less than the SCP value in the GUI window. |
NUMBER |
1 |
9 |
ADMIN - SETUP, INVENTORY MANAGEMENT |
|
mm_sec_level_rf |
To restrict user from marking Cycle Count if user privilege level is less then the SCP value in the RF window. |
NUMBER |
1 |
9 |
ADMIN - SETUP, INVENTORY MANAGEMENT |
|
mms_location |
The warehouse location that designates the manifest mailing location. |
LOCATION |
|
|
SHIPPING |
|
multi_open_manifest |
When set to Y, indicates that multiple destinations can be actively loaded into a single trailer simultaneously. |
SCP VALUE |
|
|
SHIPPING |
|
multi_sku_wip |
WIP code applied to inbound container that contains more than one container item record. |
WIP CODE |
|
|
WIP CODES |
|
nbr_divert_w_putawy |
Used with conveyor receiving where received containers are conveyed to a Putaway area. The number is the amount of containers diverted to each Putaway lane (represents a pallet). Note: This was for the Walmart/Gap versions and is not effective for other versions. |
SCP VALUE |
|
|
PUTAWAY |
|
nbr_items_pallet |
Maximum number of items per pallet, in putaway logic. |
NUMBER |
1 |
999999999 |
PUTAWAY |
|
oflow_replen_dest_id |
Destination ID for replenishments to Overflow forward picking locations. |
DEST ID |
|
|
ADMIN - SETUP, INTERNAL DEST ID |
|
order_line_number |
Y setting indicates that orders are being tracked at the order line level. |
SCP VALUE |
|
|
DISTRIBUTION - PLANNING |
|
order_set_stage |
Location in facility where outbound cartons are directed to have order sets printed. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
order_status_upload |
Y setting indicates order status information is uploaded to the host. |
SCP VALUE |
|
|
DISTRIBUTION, INVENTORY MANAGEMENT |
|
outb_ship_label |
Y setting indicates outbound cartons/pallets are directed to a PRINT and APPLY location for the application of a shipping label. N setting indicates outbound cartons/pallets are shipped with the generic picking label. |
SCP VALUE |
|
|
SHIPPING |
|
outbound_qa_wip |
WIP code to apply for cartons assigned to Outbound QA. |
WIP CODE |
|
|
WIP CODES |
|
overage_entry_reqd |
When set to Y, RWMS displays the RF Overages window before closing any type of appointment. The overages are written to the Overages to Upload file not the Receipt to Upload file. When set to N, RWMS captures overages during the normal receiving process and uploads them in the normal receipt to upload. |
SCP VALUE |
|
|
RECEIVING |
|
override |
Y setting indicates Allows user to override the suggested location in reserve storage. N setting indicates Denies the ability to override a suggested location in reserve storage. |
SCP VALUE |
|
|
PUTAWAY |
|
pack_wave_stage |
Staging location where cartons are sent to await induction into a unit sorter. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
packing_slip_qty |
Specifies the number of packing slips to be generated. |
NUMBER |
0 |
9 |
PRINTER - LABELS |
|
pallet_flow_loc_type |
User defined location type for pallet flow reserve. |
LOC TYPE |
|
|
LOC OR LOC TYPE |
|
pallet_flow_priority |
Priority used during distribution to pull merchandise from case reserve. |
NUMBER |
1 |
3 |
DISTRIBUTION - PLANNING |
|
pallet_rsv_loc_type |
User-defined location type for pallet reserve. |
LOC TYPE |
|
|
LOC OR LOC TYPE |
|
pallet_rsv_priority |
Priority used during distribution to pull merchandise from case reserve. |
NUMBER |
1 |
3 |
DISTRIBUTION - PLANNING |
|
pallet_store_putwy |
Default putway plan used for pallets having items with no putaway plan defined in the item master and the number of items on the palllet is less than SCP.nbr_items_pallet. |
PUTAWAY |
|
|
PUTAWAY |
|
pallet_tare_height |
This number is used in the calculation of the rigid cube pallet height during the putaway process. This number is added to the system pallet height to determine if the pallet will fit into a candidate putaway location. For example: if value 4 is entered and sys_dimen_uom is set at inches then it will calculate 4 inches; if sys_dimen_uom is set at centimeters it will calculate 4 centimeters. |
NUMBER |
1 |
999 |
PUTAWAY |
|
parse_publish |
Y/N, Y= When publishing XML messages, parse the message prior to sending. |
SCP VALUE |
|
|
RIB |
|
password_complexity |
Set to "N" for numeric only passwords, "A" for alphabetic only passwords, "AN" for Alphanumeric only passwords (One alphabet and one number mandatory), "ANX" for Alphanumeric and any other special character based password (Minimum of one alphabet , one number and one special character(Punctuation) mandatory) and X for any character based password. "ANX" is the suggested and the strongest setting. Any other setting will leave the system prone to brute force attacks. |
STRING |
|
|
SECURITY |
|
password_expire |
Number of days since the last password change; forces users to change their password. |
NUMBER |
1 |
365 |
ADMIN - SETUP, SECURITY |
|
password_old |
Number of days since the last password change; suggests that users change their password. |
NUMBER |
1 |
365 |
ADMIN - SETUP, SECURITY |
|
pbl_pick_to_reserve |
When set to Y, causes RWMS to generate a distribution detail record to download to the Pick-By-Light system, which causes the excess units to be re-boxed and returned to inventory. This parameter is applicable only when the pps_round_up flag is set to N |
SCP VALUE |
|
|
DISTRIBUTION - PPS |
|
pbl_replen_dest_id |
Default destination assigned for replenishment to the PPS system. |
DEST ID |
|
|
DISTRIBUTION - PPS |
|
pend_first_time_sku |
Cartons of an item on a receipt to be held on the receiving dock until the first time SKU WIP is removed. |
WIP CODE |
|
|
WIP CODES |
|
pick_audit_queue |
Line printer queue where the Pick Audit List prints. |
PRINTER |
|
|
PRINTER - LABELS |
|
pick_bulk_case |
Allows Bulk picking of single cases on Existing pallets. Excludes Single Container Bulk = Y mechandise. When set to Y, a bulk pick is generated instead of a case pick when the container quantity is 1 and the item_ master/single_contain_bulk = N |
SCP VALUE |
|
|
DISTRIBUTION |
|
pick_by_loc_flag_con |
When set to Y, RWMS is picking by location and allows mixing of conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of conveyable cartons of varying destinations onto a single pallet during Container Picking. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING |
|
pick_by_loc_flag_non |
When set to Y, RWMS is picking by location and allows mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking. When set to N, RWMS is picking by destination and does not allow mixing of non-conveyable cartons of varying destinations onto a single pallet during Container Picking. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING |
|
pick_existing |
Determines whether or not to include the inbound quantity associated to a forward pick location when determining amount of units available for picking. |
SCP VALUE |
|
|
DISTRIBUTION |
|
pick_label_queue |
Label printer queue where the pick labels prints. |
PRINTER |
|
|
PRINTER - LABELS |
|
pnad_isd_lead_time |
Pick not after date/In store date lead time. |
NUMBER |
1 |
999 |
SHIPPING |
|
po_pack |
Used for transport asset tracking. When set to Y, RWMS does not expect to see the deposit components on the purchase order and assumes PO information is at a master pack level. If set to N, RWMS expects to see the deposit components on the purchase order. Communication of the detail goes back to the host as the receipt is determined by the deposit_item_detail SCP. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
pod_break_group |
Used for Print on Demand functionality. Determines if pickers can specify a quantity of bulk pallet labels that is not evenly divisible by the pallet group size. If set to Y and a pallet group is broken, the next print job first prints the remaining pallets from the broken group before printing new groups. If set to N, only full group quantities can be printed. |
SCP VALUE |
|
|
PICKING |
|
pod_nbr_groups |
Used for Print on Demand functionality. It defines the maximum number of pallet groups that RWMS allows you to request for printing. |
NUMBER |
1 |
999 |
PICKING |
|
populate_cont_weight |
Determines whether or not calculated container weights are pre-populated to the RF windows when receiving appointments (all types). |
SCP VALUE |
|
|
RECEIVING |
|
PPS |
Unit Pick System Code associated to a Paperless Picking System (PPS and pps code refer to the same paperless picking system). |
UNIT PICK |
|
|
DISTRIBUTION - PPS |
|
pps_code |
Unit Pick System Code associated to a Paperless Picking System (PPS and ppsxcode refer to the same paperless picking system). |
UNIT PICK |
|
|
DISTRIBUTION - PPS |
|
pps_drop_off_loc |
Location where containers bound for PPS are dropped off. |
LOCATION |
|
|
DISTRIBUTION - PPS |
|
PPS_flag |
Indicates whether PPS is turned on. Used in the distribution and picking processes. |
SCP VALUE |
|
|
DISTRIBUTION - PPS |
|
pps_pick_up_loc |
Location at which RWMS picks up cartons packed by PPS. |
LOCATION |
|
|
DISTRIBUTION - PPS |
|
pps_round_up |
When set to Y, the distribution process increases (round up) the distribution evenly across the destinations to consume the excess. When set to N, the process does not exceed the requested quantity. The parameter pbl_pick_to_reserve is applicable only when the pps_round_up flag is set to Y. |
SCP VALUE |
|
|
DISTRIBUTION - PPS |
|
pre_manifest_bol |
Default sequence number for pre manifest BOLs. Used in the Conveyor Cutoff and Ship Trailer windows. |
NUMBER |
10000 |
99999 |
SHIPPING |
|
predist_timeout_sec |
The time duration that the predist receiving labels print program should wait before resubmitting if a receiving process conflict is occurring for a PO and Item. |
NUMBER |
0 |
30 |
ADMIN - SETUP, RECEIVING |
|
prepack_wip_dest |
Internal Destination ID for containers with the WIP code of Prepack. |
DEST ID |
|
|
LOC or LOC TYPE |
|
preplan_unit_replen |
Used in determining hot replen functionality. If set to Y, for case receiving putaway this will allow a single case to overfill a forward unit location when less than a case is needed. If set to N, then no overfilling of the location will occur. |
SCP VALUE |
|
|
RECEIVING, PUTAWAY |
|
print_and_apply |
Location where print and apply labels occurs. |
LOCATION |
|
|
LOC or LOC TYPE, SHIPPING |
|
print_locale_bi |
The BI Publisher language code that is used for Reports. |
STRING |
|
|
ADMIN - SETUP |
|
pts_adj_trbl_code |
Trouble code applied to cartons with PTS adjustments when you do not have the required security level to approve adjustments in case PTS. |
TRANSACTION CODE |
|
|
INVENTORY MANAGEMENT |
|
pts_ctn_max_days |
Number of days before open Put To Store carton is flagged for closure. |
NUMBER |
0 |
9999 |
DISTRIBUTION - PTS |
|
pts_loc_type |
Default location type for Put To Store. |
LOC TYPE |
|
|
LOC OR LOC TYPE |
|
putaway_stage_loc |
Location ID used to determine the appropriate inventory location. This location is assigned as the final location of a container when destined for inventory. |
LOCATION |
|
|
LOC OR LOC TYPE, PUTAWAY |
|
qa_bypass_fl |
Indicates if sortation system should weigh an inbound carton that has a QA WIP applied. |
SCP VALUE |
|
|
PROCESS |
|
qa_to_active |
Allow cartons with QA WIPs to be sent directly to active. Works in conjunction with hot_replen_recvg. |
SCP VALUE |
|
|
ACTIVE - RANDOM |
|
qa_wip_code |
WIP code to be applied to cartons that need an inbound QA. |
WIP CODE |
|
|
WIP CODES |
|
qc_audit_queue |
Printer queue where the Quality Audit prints. |
PRINTER |
|
|
PRINTER - LABELS |
|
qlty_activity_code |
Activity Code for the Quality Audit operation. |
ACTIVITY CODE |
|
|
ACTIVITY CODE |
|
quality_wip_code |
Defined WIP code applied to cartons during the Pre-receiving Process to mark for Quality Audit. |
WIP CODE |
|
|
WIP CODES |
|
random_active_stage |
Staging location where replenishment containers for random active are placed. |
LOCATION |
|
|
LOC or LOC TYPE, PICKING |
|
random_repln_dest_id |
Destination ID for Random Acgtive Locations. |
DEST ID |
|
|
ADMIN - SETUP, INTERNAL DEST ID |
|
rdm_debug_close |
A configuration setting used by developers when executing the rdm_debug package. |
SCP VALUE |
|
|
TECHNICAL |
|
rdm_debug_dir00 |
The location of the debug file used by developers when executing the rdm_debug package. |
STRING |
|
|
TECHNICAL |
|
rdm_debug_dir01 |
The location of the debug file used by developers when executing the rdm_debug package. |
STRING |
|
|
TECHNICAL |
|
reassign_wip |
Defined WIP code that reassigns a group of containers from a single destination to another single destination. |
WIP CODE |
|
|
WIP CODES |
|
rec_cases_per_hour |
This value is used to calculate the expected unloading time for appointment lines received at the CARTON level. |
NUMBER |
1 |
9999999 |
ADMIN - SETUP, RECEIVING |
|
rec_pallet_per_hour |
This value is used to calculate the expected unloading time for appointment lines received at the PALLET level. |
NUMBER |
1 |
9999999 |
ADMIN - SETUP, RECEIVING |
|
receipt_adj_nbr_hrs |
Determines how many hours after closing an appointment that you allow a receipt adjustment through the container checking window. If set to 12 hours, the container checking window allows both container quantity and unit quantity adjustments up to 12 hours after close of appointment. |
NUMBER |
0 |
999 |
INVENTORY MANAGEMENT, RECEIVING |
|
receipt_level |
Determines the level at which the receipt uploads are processed.Valid Values:A = Appointment, C = Container. |
SCP VALUE |
|
|
ADMIN - SETUP, RECEIVING |
|
recv_adjust_allowed |
Determines if the adjustment type will be a receipt adjustment or inventory adjustment. |
SCP VALUE |
|
|
LOCALIZATION, RECEIVING |
|
recv_audit_queue |
Line printer queue where the Receiving Audit List prints. |
PRINTER |
|
|
PRINTER - LABELS |
|
recv_label_queue |
Printer queue where the Receiving Label Package is printed. |
PRINTER |
|
|
PRINTER - LABELS |
|
recv_pnad_config |
Determines whether a soft message or hard stop is provided during RF receiving when the Best Before Date does not provide enough processing time (wave, pick, and ship) to reach the stores before expiration.Valid Values: C = soft warning, E = hard stop. |
SCP VALUE |
|
|
RECEIVING |
|
recv_receipt_queue |
Label printer queue where the receiving labels print. |
PRINTER |
|
|
PRINTER - LABELS |
|
recv_rnad_config |
Determines whether a soft message or hard stop is provided during RF receiving when the Best Before Date does not provide enough processing time (receive, wave, pick, and ship) to reach the stores before expiration. Valid Values: C = soft warning, E = hard stop. |
SCP VALUE |
|
|
RECEIVING |
|
recv_schedule_nbr |
Used solely for Brazil and determines whether an NF schedule is downloaded from another system to provide appointment details.When set to Y, RWMS requires a schedule to be selected on the appointment detail window. |
SCP VALUE |
|
|
RECEIVING |
|
recv_tolerance_unit |
Determines whether a soft message or hard stop is provided when the unit quantity appointed is greater than the original PO quantity plus receiving tolerance percentage.The Receiving Tolerance percentage is set in the Item Supplier Editor.Valid Values: C = soft warning, E = hard stop. |
SCP VALUE |
|
|
RECEIVING |
|
recv_tolerance_wgt |
Determines whether a soft message or hard stop is provided when the weight of a specific container exceeds the receiving tolerance percent. The Receiving Tolerance percentage is set in the Item Supplier Editor.Valid Values: C = soft warning, E = hard stop. |
SCP VALUE |
|
|
RECEIVING |
|
reg_pack_chute |
Chute designator for regular packing chutes. |
STRING |
|
|
DISTRIBUTION - PLANNING |
|
replenishment_level |
When a unit picking location is expected to drop below this value, multiplied by its unit capacity, RWMS generates a replenishment pick. This is used when a forward picking location is not assigned a specific replenishment level. It is also the default level used on the startup/convert RF windows. |
NUMBER |
0 |
1 |
DISTRIBUTION - REPLEN |
|
reprint_label_queue |
Printer queue where the labels generated by the Reprint/Null Labels window are printed. |
PRINTER |
|
|
PRINTER - LABELS |
|
reticketing_wip_code |
Defined WIP code denoting containers that need new retail price tags. |
WIP CODE |
|
|
WIP CODES |
|
return_to_vendor_loc |
Location ID that identifies the location where return to vendor processing takes place. |
LOCATION |
|
|
RETURNS |
|
return_wip |
Defined WIP codes that denote a returned container. |
WIP CODE |
|
|
RETURNS |
|
returns_location |
Location ID that identifies the location where returns processing takes place. |
LOCATION |
|
|
RETURNS |
|
rf_asn_position |
Determines the starting position for display of the ASN Number on the RF windows. |
NUMBER |
1 |
30 |
ADMIN - SETUP |
|
rf_item_position |
Determines the starting position for display of the item ID on the RF windows. |
NUMBER |
1 |
20 |
ADMIN - SETUP |
|
rop_use_distr_qty |
Determines whether the distributed quantity in a forward pick location or less than case location is considered when creating an ROP replenishment. When set to Y, RWMS triggers a replenishment when the Owned inventory (actual inventory in location + inbound Inventory - distributed inventory) is less than the replenishment quantity in that location. When set to N, RWMS triggers a replenishment when the Owned inventory (actual inventory + inbound inventory) is less than the replenishment quantity for that location. |
SCP VALUE |
|
|
DISTRIBUTION - REPLEN |
|
routing_purge_days |
Time duration used when deleting records in the Route_Dest and Route_Date tables based upon the ship date. |
NUMBER |
1 |
999 |
ADMIN - SETUP, SHIPPING |
|
ship_bol_queue |
Line printer queue where the Bill Of Lading prints. |
PRINTER |
|
|
PRINTER - LABELS |
|
ship_door_scan |
When set to Y, this forces you to scan both the door and the container ID when loading containers in shipping. |
SCP VALUE |
|
|
SHIPPING |
|
ship_label_queue |
Printer queue where shipping labels print. |
PRINTER |
|
|
PRINTER - LABELS |
|
ship_logical_pallet |
Logical Pallet in Shipping. |
SCP VALUE |
|
|
SHIPPING |
|
ship_seal_required |
Flag that allows the DC to specify if the seal number is required when shipping. |
SCP VALUE |
|
|
SHIPPING |
|
ship_stage |
Default location used the CSR table when creating routes using third party routing package. This location is used if the routing package cannot supply a staging location. |
LOCATION |
|
|
LOC or LOC TYPE, SHIPPING |
|
ship_unique_seal |
Y indicates that each seal number must be unique. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_close |
Flag that indicates that you receive shipping warnings when closing the trailer if yet to be loaded merchandise still exists in the DC. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_pt_b |
Y indicates that you receive a warning of the existence of pending Bulk (B) picks for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_pt_c |
Y indicates that you receive a warning of the existence of pending Container (C) picks for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_pt_cb |
Y indicates that you receive a warning of the existence of pending Forward Case Pick (FCP) to Belt to Outbound (CB) picks for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_pt_cf |
Y indicates that you receive a warning of the existence of pending FCP to Pallet to Outbound (CF) picks for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_pt_u |
Y indicates that you receive a warning of the existence of pending Unit (U) picks for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_pts |
Y indicates that you receive a warning of the existence of closed PTS cartons still residing in the PTS area for one or more destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_ship |
Flag that indicates that you receive shipping warnings when shipping the trailer if yet to be loaded merchandise still exists in the DC. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_status_d |
Y indicates that you receive a warning of the existence of containers with a Distributed status for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_status_p |
Y indicates that you receive a warning of the existence of containers with a Pending Pick status for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
ship_warn_status_t |
Y indicates that you receive a warning of the existence of containers with a Troubled status for one or more of the destinations associated to the trailer being processed. |
SCP VALUE |
|
|
SHIPPING |
|
singles_sorter_group |
Sorter group defined for Singles processing. |
SORTER GROUP |
|
|
DISTRIBUTION - PLANNING |
|
smtp_domain |
The domain name for e-mailing the BOL and manifest. |
STRING |
|
|
TECHNICAL |
|
smtp_host |
The host name for e-mailing the BOL and Manifest. |
STRING |
|
|
TECHNICAL |
|
smtp_port |
The port for e-mailing the BOL and manifest. |
NUMBER |
1 |
999999999 |
TECHNICAL |
|
success_msg_fade |
The time duration SUCCESSFUL OPERATION message should be displayed. |
NUMBER |
-1 |
10 |
ADMIN - SETUP |
|
sys_dimen_uom |
The unit of measure class that will be used in the system for recording dimensions (length, width, height). |
UOM |
|
|
UOM CONTROL |
|
sys_speed_uom |
The unit of measure class that will be used in the system for recording speed. |
UOM |
|
|
UOM CONTROL |
|
sys_time_uom |
The unit of measure class that will be used in the system for recording times. |
UOM |
|
|
UOM CONTROL |
|
sys_weight_uom |
The unit of measure class that will be used in the system for recording weights. |
UOM |
|
|
UOM CONTROL |
|
task_log |
Create Task Log entries to track user work. Valid values are 0:(No logging), 1:(Capture task log headers only), 2:(Capture task log headers and associated details). |
SCP VALUE |
|
|
ADMIN - SETUP |
|
ticketing_wip_code |
WIP code to apply for ticketing processing. |
WIP CODE |
|
|
WIP CODES |
|
tote_stage |
Staging location where totes are built to pallet using the Build Tote Pallet window. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
trans_wip_in_to_out |
Determines whether any inbound work orders associated to a PO/Item should be applied to cross-docked containers and processed as outbound work orders. |
SCP VALUE |
|
|
PROCESS, WIP CODES |
|
transport_balance |
When Transport_balance is set to Y, RWMS sends the inventory balance of transport assets to the host. When set to N, RWMS does not send the inventory balance of transport assets to the host. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
ucc_container_app_id |
Specific_business ID for use with UCC128 label generation. Value to use when creating an UCC128-compliant carton serial number. |
STRING |
|
|
ADMIN - SETUP, PRINTER - LABELS |
|
ucc_container_org_id |
Value to use when creating an UCC128-compliant carton serial number. |
STRING |
|
|
ADMIN - SETUP, PRINTER - LABELS |
|
ucc_manufacturer_id |
Value to use when creating an UCC128-compliant carton serial number. |
STRING |
|
|
ADMIN - SETUP, PRINTER - LABELS |
|
ulc |
User License Code - In tables not displayed in software. |
STRING |
|
|
TECHNICAL |
|
unit_block_dist_flag |
When set to Y, RWMS distributes units in Block. Block indicates that shortages are borne by the lower priority destinations. When set to N, RWMS distributes units in Round Robin. Round Robin spreads shortages proportionally among all destinations. Used in the distribution process for LTC locations only. |
SCP VALUE |
|
|
DISTRIBUTION - ACTIVE |
|
unit_pick_lbl_queue |
Printer queue where packing slip prints. Used in the Select Orders window for unit picks only. |
PRINTER |
|
|
PRINTER - LABELS |
|
unknown_item |
Item ID of unknown merchandise. Used in the Build Container window. |
ITEM |
|
|
ITEM SETUP |
|
unknown_vendor |
The vendor used for DC to DC shipments and for Store back to DC shipments.The unknown vendor must be set up in RMS as well. |
VENDOR |
|
|
ITEM SETUP, RECEIVING |
|
unlocated_location |
Location of lost containers, those that cannot be found during a cycle count. Used in the Count Location window. |
LOCATION |
|
|
LOC OR LOC TYPE |
|
upld_convert_inv_adj |
When set to Y, RWMS uploads an inventory adjustment when converting inventory to inventory during startup. |
SCP VALUE |
|
|
INVENTORY MANAGEMENT |
|
use_item_dimensions |
Used in cubing for forward case distribution. Y indicates Item Master dimensions used. N indicates Item Supplier dimensions used. |
SCP VALUE |
|
|
DISTRIBUTION |
|
va_wip_code |
WIP code used for when Vendor Assurance. |
WIP CODE |
|
|
WIP CODES |
|
vas_error_capture |
Y indicates captures user ID for VAS errors. Pertains to auditing of outbound containers in a Consumer Direct world. |
SCP VALUE |
|
|
PROCESS |
|
version_number |
Number of the System version. |
STRING |
|
|
ADMIN - SETUP |
|
weigh_wip_code |
Defined WIP code that assigns a WIP code to weigh merchandise that has a catch weight. |
WIP CODE |
|
|
WIP CODES |
|
work_on_saturday |
When set to Y, RWMS sets Saturday as a working day. Used in the Working Days Editor. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
work_on_sunday |
When set to Y, RWMS sets Sunday as a working day. Used in the Working Days Editor. |
SCP VALUE |
|
|
ADMIN - SETUP |
|
wt_round_robin_post |
Used for unit pick locations only and the Unit_Block_ Dist_Flag must be set to Y. When set to Y, RWMS distributes units in Block. Block indicates that shortages are borne by lower priority destinations. |
SCP VALUE |
|
|
DISTRIBUTION |
|
xzone_bulk_picking |
Applies when label picking equals N only. If set to Y, when you scan a starting location and there are no bulk picks in that zone, it suggests picks from a subsequent zone. If set to N, it does not suggest picks from the next zone. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING |
|
xzone_pick |
When set to Y, the distribution process creates pick across multiple zones for the same distribution. When set to N, cross-zone picking, for the same distribution, is denied. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING |
|
xzonegrp_fcpgen_pick |
For FCP to pallet with generic labels. When a user scans a location to begin this type of picking, we need to know whether to look in all zones and zone groups for a pick or restrict only to the zone/zone group for the scanned location. When set to Y, we look all over. When set to N, we only look in the zone or zone group for the location that was scanned as the start loc. |
SCP VALUE |
|
|
DISTRIBUTION, PICKING |
