Messages
Oracle Tuxedo System Messages provide the following information:
Description: The meaning and context of the message.
Action: What steps you can take to correct any problems identified.
See Also: A pointer to related information (not specified for all messages).
The Oracle Tuxedo System Messages are numbered and organized in catalogs, based on parts of the Oracle Tuxedo 10g Release 3 (10.3) system from which they are generated. For information about a specific message, click on the name of the appropriate catalog.
Note: Some messages for deprecated features may still display. Be aware that deprecated features are not supported.
4400 |
INFO: Waiting up to seconds seconds for port to clear | |
|
Description |
On some platforms the a TCP port may be help for up to four minutes by the operating system after use. The |
Action |
Ensure that the TCP port number being used by the | |
4401 |
ERROR: Could not establish network descriptor for address | |
|
Description |
The |
Action |
The | |
4402 |
ERROR: Could not change state of network descriptor for address | |
|
Description |
An operating system error occurred while attempting to change the state of the network descriptor from non-blocking to blocking. |
Action |
If this error happens consistently, contact BEA Customer Support. | |
4403 |
ERROR: Could not change state of network descriptor for address | |
|
Description |
An operating system error occurred while attempting to change the state of the network descriptor from blocking to non-blocking. |
Action |
If this error happens consistently, contact BEA Customer Support. | |
4404 |
WARN: Could not reroute encrypted messages | |
|
Description |
Link level or SSL encryption was used on a network link which has gone bad. Since the message to be sent was encrypted, it cannot be recovered and sent to an alternate address. |
Action |
No action necessary. | |
4405 |
ERROR: NETGRPNO value value must be >= 0 and < highval | |
|
Description |
While compiling the |
Action |
Change the | |
4406 |
ERROR: Memory allocation error | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4407 |
ERROR: Invalid state change | |
|
Description |
The administrator attempted to change the state of the |
Action |
These MIB state changes should not be attempted. | |
4408 |
ERROR: Shutting down bridge, serious polling error | |
|
Description |
An operating system error occurred while attempting to poll the network descriptors. |
Action |
If this error happens consistently, contact BEA Customer Support. | |
4409 |
ERROR: Received message with unknown release number value | |
|
Description |
The bridge received a packet with an unknown release number value. The network may be having difficulty. If encryption is in use, this error may be an indication that an attack is in progress. |
Action |
If this error happens consistently, contact BEA Customer Support. | |
4410 |
ERROR: Error decoding BRIDGE RPC msg | |
|
Description |
The |
Action |
If this error happens consistently, contact BEA Customer Support. | |
4412 |
ERROR: MAXPENDINGBYTES parameter must be >= 100000 | |
|
Description |
While compiling the |
Action |
Change the | |
4413 |
ERROR: Duplicate *NETGROUPS section | |
|
Description |
While compiling the |
Action |
Remove duplicate | |
4415 |
ERROR: Identifier for network group name must be <= value characters in length | |
|
Description |
While compiling the |
Action |
Shorten the name of the network group in the | |
4417 |
ERROR: Network group name name must not contain *, comma, or colon | |
|
Description |
While compiling the |
Action |
Remove the undesirable characters from name. | |
4419 |
ERROR: Duplicate *NETGROUPS entry entry | |
|
Description |
While compiling the |
Action |
Network group names must be unique. Choose another name for this network group. | |
4420 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4421 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4422 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4423 |
ERROR: More than MAXNETGROUPS(value) in configuration file | |
|
Description |
While compiling the |
Action |
Either remove network groups or increase the value of | |
4424 |
ERROR: Must have a NETGRPNO on *NETGROUPS entry entry | |
|
Description |
While compiling the |
Action |
Supply a network group number for the entry network group. Network group numbers must be unique, and should remain consistent for the life of the network group. The network group number is used to co-ordinate failover and failback of the network. | |
4425 |
ERROR: *NETGROUPS entry entry has a duplicate NETGRPNO parameter of value | |
|
Description |
While compiling the |
Action |
Supply a network group number for the entry network group. Network group numbers must be unique, and should remain consistent for the life of the network group. value is not unique. The network group number is used to co-ordinate failover and failback of the network. | |
4427 |
ERROR: NETGRPNO for the entry network group may not be 0 | |
|
Description |
While compiling the |
Action |
Supply a network group number for the entry network group. Network group numbers must be unique, and should remain consistent for the life of the network group. value is not unique, since the network group | |
4429 |
ERROR: MAXNETGROUPS parameter must be >= lowval and < highval | |
|
Description |
While compiling the |
Action |
Change the | |
4430 |
ERROR: RESOURCES section must appear before NETGROUPS section | |
|
Description |
While compiling the |
Action |
Place the | |
4432 |
ERROR: NETPRIO must be > 0 and <= value | |
|
Description |
While compiling the |
Action |
Change the | |
4433 |
ERROR: NETGROUPS section must appear before NETWORK section | |
|
Description |
While compiling the |
Action |
Place the | |
4434 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4435 |
ERROR: Could not find machine section | |
|
Description |
The |
Action |
The | |
4436 |
ERROR: Could not find LMID name in machine section | |
|
Description |
The |
Action |
The | |
4437 |
ERROR: Memory allocation error | |
|
Description |
An attempt to dynamically allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. There may be a security attack in progress. | |
4438 |
WARN: Minimum encryption (min) is larger than 0, but the link level package is not installed | |
|
Description |
An attempt was made to use link level encryption of min bits on a network link. However, the link level encryption package has not been installed on this machine. |
Action |
Install the link level encryption package on this machine, or change the | |
4439 |
ERROR: LMID name must match LMID from the * | |
|
Description |
While compiling the |
Action |
Either remove the | |
4440 |
ERROR: NETGROUP name must match NETGROUP from the *NETGROUPS section | |
|
Description |
While compiling the |
Action |
Either remove the | |
4442 |
ERROR: Invalid group information/self NADDR missing, NETGRPNO netgrpno | |
|
Description |
The |
Action |
Ensure that every machine in a network application is a member of a network group. All machines should be members of the | |
4443 |
ERROR: TA_NETGROUP cannot be used on a SET operation | |
|
Description |
The |
Action |
Remove the | |
4450 |
ERROR: NETGRPNO for the netgroup network group must be 0 | |
|
Description |
While compiling the |
Action |
netgroup is a special network group which must have a | |
4452 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4453 |
ERROR: The combination of NETGROUP netgroup and LMID lmid must be unique | |
|
Description |
While compiling the |
Action |
Ensure that all entries in the | |
4455 |
ERROR: NETGROUP parameter must be <= value characters | |
|
Description |
While compiling the |
Action |
Shorten the name of the | |
4460 |
ERROR: BRIDGE Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The use of | |
4461 |
ERROR: Could not find BRIDGE NADDR address for lmid | |
|
Description |
While attempting to connect to the |
Action |
Ensure that an entry exists for lmid in the | |
4462 |
ERROR: Could not find BRIDGE NADDR address for lmid | |
|
Description |
While attempting to connect to the |
Action |
Ensure that an entry exists for lmid in the | |
4464 |
ERROR: Could not initialize global network information | |
|
Description |
An operating system error occurred while attempting to initialize network information. The |
Action |
Ensure the viability of the network. If the network appears to be viable, contact BEA Customer Support. | |
4465 |
ERROR: BRIDGE Memory allocation error | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The use of | |
4466 |
ERROR: BRIDGE Memory allocation error while connecting lmid | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The use of | |
4467 |
ERROR: BRIDGE system error at id | |
|
Description |
An internal error was captured by the |
Action |
Contact BEA Customer Support. | |
4468 |
ERROR: Could not initialize protocol specific network information | |
|
Description |
An operating system error occurred while attempting to initialize network information. |
Action |
Ensure the viability of the network. If the network appears to be viable, contact BEA Customer Support. | |
4469 |
ERROR: Could not initialize protocol specific network information | |
|
Description |
An operating system error occurred while attempting to initialize network information. |
Action |
Ensure the viability of the network. If the network appears to be viable, contact BEA Customer Support. | |
4471 |
ERROR: Received message with unknown release number value | |
|
Description |
The tlisten received a packet with an unknown release number value. The network may be having difficulty. If link level encryption is in use, this error may be an indication that an attack is in progress. |
Action |
If this error happens consistently, contact BEA Customer Support. | |
4472 |
ERROR: Could not allocate network resource | |
|
Description |
A network descriptor could not be allocated for the listening endpoint in |
Action |
Ensure the network on the system is viable. If this error happens consistently, contact BEA Customer Support. | |
4473 |
ERROR: Unable to decrypt message | |
|
Description |
A process speaking to a tlisten process could not decrypt one of the messages coming from the tlisten. This error may indicate that an attack is in progress. |
Action |
Ensure the network on the system is viable. If this error happens consistently, contact BEA Customer Support. | |
4474 |
ERROR: Error encrypting buffer for TAGENT on lmid | |
|
Description |
A process speaking to a |
Action |
Ensure the network on the system is viable. If this error happens consistently, contact BEA Customer Support. | |
4475 |
INFO: SRVID = id SRVGRP = grp SIGTERM send failed (tperrno = tperrno) | |
|
Description |
tmshutdown was unable to send a |
Action |
No action necessary. | |
4476 |
INFO: SRVID = id SRVGRP = grp SIGKILL send failed (tperrno = tperrno) | |
|
Description |
|
Action |
No action necessary. | |
4477 |
INFO: SRVID=id SRVGRP=grp SIGTERM send failed (tperrno=tperrno) | |
|
Description |
|
Action |
No action necessary. | |
4478 |
INFO: SRVID=id SRVGRP=grp SIGKILL send failed (tperrno=tperrno) | |
|
Description |
|
Action |
No action necessary. | |
4479 |
ERROR: Could not get encryption handle | |
|
Description |
|
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4480 |
ERROR: NETGROUP id negotiation failed with bridge on lmid | |
|
Description |
The |
Action |
Ensure the network is viable and that there were no security attacks in progress. It may be necessary to bring the affected machine down, remove its | |
4482 |
ERROR: .SysServiceTimeout: queue, group group, id srvid server killed due to a service time-out | |
|
Description |
The |
Action |
The administrator may need to configure the service time-out higher in order to accommodate a heavily loaded system. | |
4483 |
INFO: .SysMachineState: mid state change to ACTIVE | |
|
Description |
The given mid has become unpartitioned. |
Action |
No action necessary. | |
4484 |
INFO: .SysMachineUnpartitioned: mid is unpartitioned | |
|
Description |
The given mid has become unpartitioned. |
Action |
No action necessary. | |
4485 |
INFO: .SysMachineState: mid state change to ACTIVE | |
|
Description |
The given mid has become unpartitioned. |
Action |
No action necessary. | |
4486 |
ERROR: Could not send saved messages | |
|
Description |
The |
Action |
Ensure that the network connection is viable. If the network is flaky, it is possible that the connection establishment packet was received, but that subsequent packets were lost by the network. If the network appear to be viable, contact BEA Customer Support. | |
4487 |
ERROR: BRIDGE did not generate a unique circuit ID | |
|
Description |
The |
Action |
Contact BEA Customer Support. | |
4488 |
INFO: Connecting to pmid at address | |
|
Description |
This is an information message that indicates that a connection is being made to a machine at the specified address. |
Action |
No action required. | |
4489 |
ERROR: BRIDGE Memory allocation error | |
|
Description |
The |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
4490 |
ERROR: Connection failure to machine at address | |
|
Description |
The |
Action |
| |
4491 |
ERROR: Could not send saved messages to site | |
|
Description |
While the |
Action |
Check the network on the machine with the affected | |
4492 |
INFO: Resuming BRIDGE failover/failback messages | |
|
Description |
There had been too many |
Action |
This is an informational message, no action is required. If the connection is not established, notify the network administrator of the network outage. | |
4493 |
INFO: Temporarily suppressing BRIDGE failover/failback messages | |
|
Description |
The |
Action |
The | |
4494 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
4495 |
ERROR: Tuxedo typed buffer routine failed | |
|
Description |
An attempt to create a message in the BBL to send a process obituary failed for a reason other than allocating memory. |
Action |
Review other messages earlier in the log that indicate what caused the failure. | |
4497 |
ERROR: Unknown message header | |
|
Description |
While a secondary Event Broker was receiving the event database from the primary Event Broker, processing the message failed. |
Action |
Contact BEA Customer Support. | |
4498 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
4499 |
ERROR: Tuxedo typed buffer routine failed | |
|
Description |
An attempt to create a message in the BBL to send a process obituary failed for a reason other than allocating memory. |
Action |
Review other messages earlier in the log that indicate what caused the failure. |