Messages
Oracle Tuxedo System Messages provide the following information:
Description: The meaning and context of the message.
Action: What steps you can take to correct any problems identified.
See Also: A pointer to related information (not specified for all messages).
The Oracle Tuxedo System Messages are numbered and organized in catalogs, based on parts of the Oracle Tuxedo 10g Release 3 (10.3) system from which they are generated. For information about a specific message, click on the name of the appropriate catalog.
Note: Some messages for deprecated features may still display. Be aware that deprecated features are not supported.
7000 |
ERROR: Minimum encryption (strength is larger than 56, but only the 56-bit SSL package is installed | |
|
Description |
The configured minimum encryption strength is greater than 56 bits, but the installed TUXEDO system is licensed to do at maximum 56 bits encryption. |
Action |
Change the configuration to the allowable encryption strength value, or contact BEA Customer Support for purchasing the TUXEDO SSL license. | |
7001 |
WARN: SSL encryption is configured for this configuration, but the SSL package is not installed | |
|
Description |
The BRIDGE configuration requires SSL but the installed TUXEDO is not licensed to use SSL. |
Action |
Change configuration to use LLE if it is license, or contact BEA Customer Support to purchase the TUXEDO SSL license. | |
7002 |
WARN: Minimum encryption (strength) is larger than 56, but only the 56-bit SSL package is installed | |
|
Description |
The configured minimum encryption strength) is greater than 56 bits, but the installed TUXEDO system is licensed to do at most 56 bits encryption. |
Action |
Change the configuration to the allowalbe encryption strngth value, or contact BEA Customer Support for purchasing the TUXEDO SSL license. | |
7003 |
ERROR: NO SSL encryption package installed, but this configuration speifies SSL | |
|
Description |
The 'tlisten' process is configured with SSL but the installed TUXEDO System is not licensed to use SSL. |
Action |
Modified your configuration, or call BEA Customer Support for purchasing TUXEDO SSL license. | |
7004 |
ERROR: 56-bit SSL package installed. num bits minimum encryption is configured | |
|
Description |
A 56-bit TUXEDO SSL package is installed, bu the configured minimum SSL encryption strength requrement is greater than 56 bits. |
Action |
Modify configuration, or call BEA Customer Support. | |
7005 |
ERROR: -s is specified, but the SSL package is not installed | |
|
Description |
The SSL secure port option is specified for tlisten process but the installed TUXEDO System does not have SSL package. |
Action |
Change command line option, or contact BEA Customer Support for purchasing TUXEDO SSL package. | |
7006 |
ERROR: -z (number-of-bits) is larger than 56, but only 56-bit SSL package is installed | |
|
Description |
The SSL minimum encryption strength option is specified with value 'number-of-bits' for tlisten process but the installed TUXEDO SSL package only support maximum 56 bit encryption strength. |
Action |
Change command line option, or contact BEA Customer Support for purchasing TUXEDO SSL package. | |
7007 |
ERROR: Cannot initialize SSL subsystem | |
|
Description |
The tlisten or slisten process failed while during SSL subsystem initialization. |
Action |
Look for prior error message in the ULOG to find the true nature of the failure. The most common problems are due to the incorrect PKI configuration. Check your SSL configuration especially the certificate and private key to see whether they match the PKI plug-in configuration. You may also need to check whether your LDAP filter rules. | |
7008 |
ERROR: Connection closed by peer | |
|
Description |
BRIDGE SSL network connection is closed by its peer. |
Action |
Check ULOG of its peer for reason of closing the network connection. | |
7009 |
ERROR: Connection closed by peer | |
|
Description |
BRIDGE SSL network connection is closed by its peer. |
Action |
Check ULOG of its peer for reason of closing the network connection. | |
7010 |
ERROR: Connection closed by peer | |
|
Description |
BRIDGE SSL network connection is closed by its peer gracefully. |
Action |
Check ULOG of its peer for reason of closing the network connection. | |
7011 |
ERROR: Memory allocation failure for nbytes bytes | |
|
Description |
An attempt by BRIDGE to allocate memory dynamically for nbytes bytes failed while receiving network message. |
Action |
Make sure the operation system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine. Also increate the space on the swap device. | |
7012 |
ERROR: Missing security principal name in registry | |
|
Description |
The slisten is configured to use SSL but the required security principal name is not found in Windows registry. |
Action |
Run 'TUXEDO Administration' from control panel and correct Windows registrys information. Or reinstall TUXEDO and configure it correctly. | |
7013 |
ERROR: Missing security principal location in registry | |
|
Description |
The slisten is configured to use SSL but the required security principal private key location is not found in Windows registry. |
Action |
Run 'TUXEDO Administration' from control panel and correct Windows registrys information. Or reinstall TUXEDO and configure it correctly. | |
7014 |
ERROR: Missing security principal password in registry | |
|
Description |
The slisten is configured to use SSL but the required security principal password for private key is not found in Windows registry. This password is in encrypted and represented in BASE64 format. |
Action |
Run 'convertp2e.exe password' from command line, copy the output. Then run 'TUXEDO Administration' from control panel and paste the data. Or reinstall TUXEDO and configure the private key password. | |
7015 |
INFO: Missing maximum encryption strength in registry, use default 128-bit! | |
|
Description |
The maximum encryption strength for ' |
Action |
No action required; however, if 128-bits is not desired then either use 'TUXEDO Administrator' to modify registry or reinstall TUXEDO and configure it correctly. | |
7016 |
ERROR: Invalid maximum encryption strength(n) in registry! | |
|
Description |
The maximum encryption strength is incorrectly configured in the Windows registry with a value of 'n'. |
Action |
Correct the configured value either through reinstall TUXEDO or modify the registry using 'TUXEDO Administrator'. | |
7017 |
INFO: Missing minimum encryption strength in registry, use default 0-bit! | |
|
Description |
The minimum encryption strength for ' |
Action |
No action required; however, if 0-bits is not desired then either use 'TUXEDO Administrator' to modify registry or reinstall TUXEDO and configure it correctly. | |
7018 |
ERROR: Invalid minimum encryption strength(n) in registry! | |
|
Description |
The minimum encryption strength is incorrectly configured in the Windows registry with a value of 'n'. |
Action |
Correct the configured value either through reinstall TUXEDO or modify the registry using 'TUXEDO Administrator'. | |
7019 |
ERROR: Minimum encryption strength(min) greater than maximum encryption strength(max)! | |
|
Description |
The configured minimum encryption strength 'min' is greater than maximum encryption value 'max'. |
Action |
Correct the configured value either through reinstall TUXEDO or modify the registry using 'TUXEDO Administrator'. | |
7020 |
ERROR: Could not encrypt principal password, errno=ecode | |
|
Description |
The encryption of user private key password failed with error return code 'ecode'. |
Action |
Contact BEA Customer Support. | |
7021 |
ERROR: Could not initialize encryption of principal password, errno=ecode | |
|
Description |
Failed to initialize the encyrption process for user private key password. |
Action |
Check ULOG for actual cause of the failure and contact BEA Customer Support. | |
7022 |
ERROR: TSAM Manager reported error: error message | |
|
Description |
TSAM Manager reported error message to the request from LMS. |
Action |
Check ULOG for actual cause of the failure and contact BEA Customer Support | |
7023 |
"\nWARN: MAXSPDATA parameter should be >= %d and <= 2147483640\n" | |
|
Description |
The MAXSPDATA is out of range. TUXCONFIG is still generated using MAXSPDATA = 0. The default value is used when TUXCONFIG is reading memory at boot time. |
Action |
If MAXSPDATA related features are not used (for example, TSAM), ignore this message. Otherwise, set the MAXSPDATA with the indication. | |
7024 |
"\nWARN: According to the specified MAXQUEUES (or MAXSERVERS, if MAXQUEUES not set), the MAXSPDATA parameter should be >= %d and <= 2147483640\n" | |
|
Description |
MAXSPDATA is out of range. This range is decided by MAXQUEUES (or MAXSERVERS, if MAXQUEUES not set). TUXCONFIG is still generated using MAXSPDATA = 0. The default value is used when TUXCONFIG is reading memory at boot time. |
Action |
If MAXSPDATA related features are not used (for example, TSAM), ignore this message. Otherwise, set the MAXSPDATA with the indication. | |
7025 |
ERROR: tms_abort xa_rollback returned error for group groupname | |
|
Description |
BEA TUXEDO was rolling back a transaction. The resource manager returned an error when |
Action |
Check the error reporting mechanism for the associated resource manager. | |
7026 |
ERROR: tms_habort xa_rollback returned error for group groupname | |
|
Description |
BEA TUXEDO was heuristically rolling back a transaction. The |
Action |
Check the error reporting mechanism for the associated resource manager. | |
7027 |
ERROR: tms_timeout xa_rollback returned error for group groupname | |
|
Description |
BEA TUXEDO was processing a timeout request for a transaction. The resource manager returned an error from |
Action |
Check the error reporting mechanism for the associated resource manager. | |
7028 |
ERROR: Only one LMS instance is allowed on one machine | |
|
Description |
Only one LMS instance is allowed on one machine. |
Action |
Make sure only deploy one LMS on one machine in a Tuxedo domain. | |
7029 |
ERROR: TSAM Manager rejected message: request message | |
|
Description |
TSAM Manager refused to accept a request message from LMS. |
Action |
Check ULOG for actual cause of the failure and contact BEA Customer Support | |
7031 |
ERROR: TUXCONFIG environment variable not set | |
|
Description |
While executing |
Action |
Set and export the TUXCONFIG environment variable and re-execute the command. | |
See Also |
| |
7032 |
ERROR: Unable to read RESOURCES section of TUXCONFIG file | |
|
Description |
|
Action |
Please examine the userlog for further information. If necessary, please contact your BEA TUXEDO System Administrator. | |
7033 |
ERROR: Execute permission denied, not application administrator | |
|
Description |
|
Action |
Re-run the command as the proper user. | |
7034 |
ERROR: Unable to initialize public key subsystem | |
|
Description |
|
Action |
Ensure the registry is in a consistent state with the | |
See Also |
| |
7035 |
ERROR: Cannot become a client - tperrno tperrno_value errno errno_value Uunixerr Uunixerr_value | |
|
Description |
The administrative client |
Action |
There may be more than one instance of | |
7036 |
ERROR: memory allocation failure | |
|
Description |
|
Action |
Memory resources may be depleted. Use system administrative tools to free memory before | |
7039 |
ERROR: Can not lock the bulletin board | |
|
Description |
A bulletin board lock could not be obtained when |
Action |
Try again after a few seconds, giving the bulletin board lock recovery algorithm time to run. If this error continues, contact your BEA TUXEDO system Technical Support. | |
7042 |
ERROR: NADDR parameter does not support wildcard([::]) in MP mode when IPv6 enabled. | |
|
Description |
In UBB configuration file, configure NADDR parameter as wildcard([::]) is not allowed. |
Action |
Change NADDR to specific IP address and try again. | |
7043 |
ERROR: NLSADDR parameter does not support wildcard([::]) in MP mode when IPv6 enabled. | |
|
Description |
In UBB configuration file, configure NLSADDR parameter as wildcard([::]) is not allowed. |
Action |
Change NLSADDR to specific IP address or hostname and try again. | |
7044 |
ERROR: tlisten does not support wildcard([::]). | |
|
Description |
When booting tlisten with -l //[::], tlisten configured to bind on wildcard([::]) IP address is not allowed. |
Action |
Configure tlisten with -l on specific IP address or hostname and try again . | |
7045 |
ERROR: Cannot boot, error reading *ROUTING section | |
|
Description |
During the |
Action |
Verify that the environment variable | |
See Also |
| |
7046 |
ERROR: Cannot boot old release site (site_name) when CLOPT is greater than 256 | |
|
Description |
For pre-Tuxedo 10gR3 releases, the CLOPT is limited to 256. When Tuxedo is running in a mixed releases MP mode environment on any slave node that runs a release earlier than Tuxedo 10gR3, then CLOPT is limited to 256 for the entire Tuxedo Application domain. |
Action |
Either upgrade the older release node to Tuxedo 10gR3 and above, or change the CLOPT to value smaller than or equal to 256. | |
7047 |
ERROR: Cannot boot old release site (site_name) when ROUTING section FIELD is greater than 30 | |
|
Description |
For pre-Tuxedo 10gR3 releases, the FIELD of ROUTING section is limited to 30. When Tuxedo is running in a mixed releases MP mode environment on any slave node that runs a release earlier than Tuxedo 10gR3, then FIELD of ROUTING section is limited to 30 for the entire Tuxedo Application domain. |
Action |
Either upgrade the older release node to Tuxedo 10gR3 and above, or change the FIELD of ROUTING section to value smaller than or equal to 30. |