Messages
Oracle Tuxedo System Messages provide the following information:
Description: The meaning and context of the message.
Action: What steps you can take to correct any problems identified.
See Also: A pointer to related information (not specified for all messages).
The Oracle Tuxedo System Messages are numbered and organized in catalogs, based on parts of the Oracle Tuxedo 10g Release 3 (10.3) system from which they are generated. For information about a specific message, click on the name of the appropriate catalog.
Note: Some messages for deprecated features may still display. Be aware that deprecated features are not supported.
5001 |
ERROR: No space in Bulletin Board for additional AOM entries | |
|
Description |
An attempt to allocate a free entry in the Bulletin Board for the Active Object Map has failed. The Bulletin Board is full. |
Action |
Re-configure the application to increase the size of the table
by setting the | |
See Also |
| |
5003 |
ERROR: Failed to initialize AOM | |
|
Description |
The system was unable to initialize the Active Object Map. |
Action |
Normally, there is a message in the log that provides more detail on the initialization failure. If not, contact BEA Customer Support. | |
5004 |
WARN: USEM[val] owned by val, but not locked | |
|
Description |
Either the machine does not have the proper atomic increment for the user-level semaphore, or there are too many signals coming to the process too quickly. |
Action |
Please contact BEA Customer Support. | |
5005 |
WARN: USEM[val] lock appears stuck: held by pid=val | |
|
Description |
The process has held the lock on the Bulletin Board for a longer than normal period of time. The process could still be alive, but incorrectly holding the user-level semaphore. |
Action |
Check the status of the process that is holding the lock. It might be hung, or it is holding the lock for too long a period of time while doing work. | |
5006 |
ERROR: Unable to reset semaphore for sem val, errno val | |
|
Description |
The BEA Tuxedo system was in the process of cleaning up a registry slot
for a process. While cleaning the registry,
the semaphore used for that process had to be reset.
The semaphore operation |
Action |
Please contact BEA Customer Support. | |
5007 |
ERROR: Memory allocation failure. | |
|
Description |
An attempt to dynamically allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
5008 |
ERROR: Memory allocation failure. | |
|
Description |
An attempt to dynamically allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
5009 |
ERROR: MAXOBJECTS is 0: No methods allowed. | |
|
Description |
An operation related to object methods was executed but no objects are configured. |
Action |
Re-configure the application to increase the size of the table
by setting the | |
See Also |
| |
5010 |
ERROR: Received unrecognized message type - sending failure reply | |
|
Description |
The server received an invalid service request message. It will be ignored and a failure reply will be sent to the requestor. |
Action |
Please contact BEA Customer Support. | |
5011 |
ERROR: One way method was not executed | |
|
Description |
An attempt to execute a one way method failed. No notification will go back to the client. |
Action |
No action is needed. | |
5012 |
ERROR: Memory allocation failure. | |
|
Description |
An attempt to dynamically allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
5013 |
ERROR: Memory allocation failure. | |
|
Description |
An attempt to dynamically allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
5014 |
ERROR: Memory allocation failure. | |
|
Description |
An attempt to dynamically allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
5015 |
ERROR: Memory allocation failure | |
|
Description |
An attempt to dynamically allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. | |
5019 |
ERROR: [Unable to open the *INTERFACES section table] | |
|
Description |
A BEA Tuxedo system internal function was used to retrieve interface information from the interfaces table, but the open failed. |
Action |
Please contact BEA Customer Support. | |
5020 |
ERROR: [Unable to read information from the *INTERFACES section table] | |
|
Description |
A BEA Tuxedo system internal function was unable to read the
|
Action |
Please contact BEA Customer Support. | |
5021 |
WARN: Could not lock USEM[val] | |
|
Description |
The |
Action |
No action required. | |
5024 |
ERROR: Cannot create call descriptor for callout message, tperrno=val | |
|
Description |
While generating a descriptor handle for a callout message, an error occurred with tperrno tperrno. |
Action |
The maximum number of outstanding asynchronous callout method invocations was reached. Retrieve replies to at least one of the invocations and issue the callout again. | |
5025 |
ERROR: Unable to send callout message to process (val) | |
|
Description |
While sending a callout message to process pid, an error occurred. |
Action |
The most common cause of this error message is that the recipient of the callout message has died. Check to see if pid is still running, and if it is, contact BEA Customer Support. | |
5026 |
ERROR: Object key not recognized: ErrStatus val | |
|
Description |
A GIOP message was received that is unrecognized. |
Action |
Contact BEA Customer Support. | |
5027 |
WARN: Deleting AOM record locked by dead server: | |
|
Description |
The BBL is cleaning up an AOM entry for a dead server. |
Action |
None. | |
5028 |
WARN: AOM Record lock stuck. Server with object stealing lock. | |
|
Description |
A process has held a lock on an entry in the AOM for a longer than normal period of time. If the process is still alive, it may be incorrectly holding the record lock. |
Action |
Check the status of the process that is holding the lock. There could be a problem with the process; it could be hung or dead. | |
5029 |
WARN: AOM record lock stuck. Server with object stealing lock. | |
|
Description |
A process has held a lock on an entry in the AOM for a longer than normal period of time. If the process is still alive, it may be incorrectly holding the record lock. |
Action |
Check the status of the process that is holding the lock. There could be a problem with the process; it could be hung or dead. | |
5050 |
ERROR: .SysTransactionHeuristicMix: Transaction gtrid in group grpno | |
|
Description |
This message indicates that the resource manager in the group specified above indicated that work on the transaction specified in the message was partially committed and partially rolled back. |
Action |
Consult the resource manager log files and/or error messages to determine further information about the error. Consult application records to determine the proper result of the transaction and manually correct any erroneous data. | |
See Also |
| |
5051 |
WARN: .SysTransactionHeuristicHazard: Transaction gtrid in group grpno | |
|
Description |
This message indicates that the resource manager in the group specified above indicated that there is a risk that a heuristic decision may have been taken for work on the transaction specified in the message, but that this did not necessarily happen. |
Action |
Consult the resource manager log files and/or error messages to determine whether or not a heuristic completion took place. If a heuristic completion did happen, consult application records to determine the proper result of the transaction and manually correct any erroneous data. | |
See Also |
| |
5052 |
WARN: .SysTransactionXA_RETRY: Transaction gtrid in group grpno | |
|
Description |
This message indicates that the resource manager in the group specified is unable to work on the transaction branch at this time. The XA specification does not consider this an error, and it can happen if the RM temporarily lacks the needed resources to work on the transaction. The transaction remains in its current state, and transactional integrity is maintained. Tuxedo will retry the operation at a later time. |
Action |
If this message occurs occasionally, no action is required. If this message occurs frequently, consult resource manager log files, error messages, and/or documentation to try to determine the cause of this condition. | |
See Also |
| |
5053 |
ERROR: .SysTransactionXAER_RMERR: Transaction gtrid in group grpno | |
|
Description |
This message indicates that an XA operation on transaction gtrid in group grpno returned XAER_RMERR, indicating a resource manager error. |
Action |
Consult resource manager log files and documentation to determine the cause of the error and to determine if any corrective action is needed. | |
See Also |
| |
5054 |
ERROR: .SysTransactionXAER_PROTO: Transaction gtrid in group grpno | |
|
Description |
This message indicates that an XA operation on transaction gtrid in group grpno returned XAER_PROTO, indicating that the resource manager believes the call was made in an improper state. manager error. |
Action |
Consult resource manager and Tuxedo log files to determine more informtion about the cause of the problem. | |
See Also |
| |
5055 |
ERROR: .SysTransactionXAER_RMFAIL: Transaction gtrid in group grpno | |
|
Description |
This message indicates that an XA operation on transaction gtrid in group grpno returned XAER_RMFAIL, indicating that the resource manager is currently unavailable. |
Action |
Consult resource manager log files to determine the cause of the problem and restart the resource manager if necessary. | |
See Also |
| |
5056 |
INFO: .SysTransactionRollback: Transaction gtrid in group grpno XA return return_value | |
|
Description |
This message indicates a commit operation on transaction gtrid in group grpno returned an indication that the transaction was rolled back. The return_value provides further information about the reason for the rollback. This condition is not an error and can occur in various resource manager deadlock and resource limit situations. |
Action |
No action required. | |
See Also |
|