An internal TUXEDO IPC error has occurred.
An attempt to allocate memory for
semaphore list
from the operating system using malloc() failed.
Reduce the memory usage on the machine or increase the
amount of physical memory on the machine.
An internal TUXEDO IPC error has occurred.
The OpenSemaphore() system function call which returns a handle of
an existing named semaphore object failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The ReleaseSemaphore() system function call
to wake up a process failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The WaitNamePipe() system function call which waits forever on
TUXEDO IPC Server Pipe (IPC_SERVER_PIPE) until it is available to be
connected to failed. The TUXEDO IPC Server cannot be accessed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
Check to see if the TUXEDO IPC Helper service has been stopped by going
into Control Panel Service applet. If so, restart the TUXEDO IPC
Helper service from the Control Panel of your machine.
An internal TUXEDO IPC error has occurred.
The CreateFile() system function call which is used to open
the TUXEDO IPC Server Pipe (IPC_SERVER_PIPE) for read or write failed.
INVALID_HANDLE_VALUE has been returned from CreateFile().
The TUXEDO IPC Server cannot be accessed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
Check to see if the TUXEDO IPC Helper service has been stopped by going
into Control Panel Service applet. If so, restart the TUXEDO IPC
Helper service from the Control Panel of your machine.
Also, check the permissions on the TUXEDO IPC Helper service.
An internal TUXEDO IPC error has occurred.
The SetNamedPipeHandleState() system function call which sets
the read mode of the TUXEDO IPC Server Pipe (IPC_SERVER_PIPE) failed.
Data is set to be read from the pipe as a stream of messages.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The TransactNamedPipe() system function call which
combines a write operation and a read operation
into a single network operation from the
the TUXEDO IPC Server Pipe (IPC_SERVER_PIPE) failed.
The TUXEDO IPC server cannot be contacted.
This function fails if the server did not create the pipe
as a message-type pipe or if the pipe handle is not in
message-read mode.
Also, the function returns ERROR_MORE_DATA if the read buffer specified
in the call is not large enough to hold the entire message.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The reply buffer from the TUXEDO IPC Server has invalid length
after the TransactNamedPipe() system function call.
Please check Microsoft documentation for details on
TransactNamedPipe().
Existing shared memory segment will be reused.
When creating TUXEDO IPC, warning messages are issued if existing
values do not match with default configuration values for all parameters
of the TUXEDO IPC Helper service.
Check your registry database for all your TUXEDO IPC parameters.
An internal TUXEDO IPC error has occurred.
An attempt to allocate memory for
an anonymous security descriptor
from the operating system using malloc() failed.
Reduce the memory usage on the machine or increase the
amount of physical memory on the machine.
An internal TUXEDO IPC error has occurred.
The InitializeSecurityDescriptor() system function call
which initializes a security descriptor to have no system Access
Control List (ACL), no discretionary Access Control List (ACL),
no owner, no primary group and all control flags set to NULL failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The SetSecurityDescriptorDacl() system function call
which sets information in a discretionary access-control list (ACL)
failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateMutex() system function call
which creates the TUXEDO IPC mutex object
failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateFileMapping() system function call
which creates the TUXEDO shared memory
failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
The OpenSCManager() system function call
which opens a connection to the Windows NT service control manager
and the ServicesActive database
failed.
Possible errors are the requested access to the service control manager
and ServicesActive database was denied, or the ServicesActive database does
not exist.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
The OpenService() system function call
which opens a handle to the TUXEDO IPC service
failed.
The TUXEDO IPC Helper service is not accessible.
This error occurs usually because the TUXEDO IPC Helper service does not exist.
You need to initially run the process program comes with the TUXEDO
distribution media to install the software. As part of the installation,
the TUXEDO IPC Helper service will be created. Restart the TUXEDO IPC
Helper service.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
The StartService() system function call
which starts the TUXEDO IPC service
failed.
This error occurs usually because the TUXEDO IPC Helper service does not exist.
You need to initially run the process program comes with the TUXEDO
distribution media to install the software. As part of the installation,
the TUXEDO IPC Helper service will be created.
It is possible that the TUXEDO IPC Helper service binary
(tuxipc.exe) could not be found. Check your path and registry
values under
\\HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\TUXEDO IPC Helper\\ImagePath.
It is also possible that another instance of the TUXEDO IPC Helper is
already running. Other possible errors are the service database is locked
or the TUXEDO IPC Helper service has been disabled. Restart your
TUXEDO IPC Helper service.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
The QueryServiceStatus() system function call
which retrieves the current status of the TUXEDO IPC service
failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors. You might have to restart your TUXEDO IPC Helper service
from your Control Panel Service applet.
The TUXEDO IPC Helper service could not be started because Windows NT
service manager could not be opened or the TUXEDO IPC Helper service
is inaccessible. The TUXEDO IPC Helper (tuxipc.exe) will be started
as a normal process rather than a service now.
The TUXEDO IPC Helper (e) is started
as a normal process rather than a service.
All applications will exit when console user logs off.
An internal TUXEDO IPC error has occurred.
The CreateProcess() system function call
which creates the TUXEDO IPC Helper (tuxipc.exe) as a normal
process rather than a service
failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors. Check to see if you have tuxipc.exe already
running.
An internal TUXEDO IPC error has occurred.
The CreateSemaphore() system function call
which creates sleep semaphore object
failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The WaitNamePipe() system function call which waits forever on
the TUXEDO IPC Server Pipe (IPC_SERVER_PIPE) until it is available to be
connected to failed. The TUXEDO IPC Server cannot be accessed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
Check to see if the TUXEDO IPC Helper service has been stopped by going
into Control Panel Service applet. If so, restart the TUXEDO IPC
Helper service from the Control Panel of your machine.
Unable to get a TUXEDO shared memory segment.
The CreateFileMapping() system function call
failed with ERROR_ALREADY_EXISTS.
The shared memory segment was left open after tuxipc died.
Existing shared memory segment shmid will be reopened.
An internal TUXEDO IPC error has occurred.
Unable to attach a TUXEDO shared memory segment.
The OpenFileMapping() system function call
failed.
The shared memory segment was missing.
Restart your TUXEDO IPC Helper service or reboot your machine
if the problem is persistent.
Unable to detach a TUXEDO shared memory segment.
The UnmapViewOfFile() system function call
failed.
Contact your TUXEDO System Technical Support.
An internal TUXEDO IPC error has occurred.
The ReleaseSemaphore() system function call which is used to
wake up a thread failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateEvent() system function call which
creates timer event failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The DuplicateHandle() system function call
to duplicate the main thread handle
on current process failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateEvent() system function call
to create pause event failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateEvent() system function call
to create timer start event failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateThread() system function call
to create timer thread failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The WaitForSingleObject() system function call which waits forever
failed on the timer start event.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The PostThreadMessage() system function call
to send message to timer thread failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An attempt to allocate memory
from the operating system using malloc() failed.
Reduce the memory usage on the machine or increase the
amount of physical memory on the machine.
An internal TUXEDO IPC error has occurred.
The CreateEvent() system function call failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateThread() system function call failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
Process pid is no longer alive, and it will be removed.
Contact your TUXEDO System Technical Support.
An internal TUXEDO IPC error has occurred.
Waiting for the process to terminate has failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
The CreateEvent() system function call failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
An internal TUXEDO IPC error has occurred.
Creating the TUXEDO IPC data has failed.
The extended error information is described in error by calling
GetLastError(). Please check Microsoft documentation for details
on those errors.
DESCRIPTION
ACTION
2 ERROR: Cannot open semaphore 'name': error
DESCRIPTION
ACTION
3 ERROR: Cannot wakeup proc pid: error
DESCRIPTION
ACTION
4 ERROR: Cannot access ipc server (error)
DESCRIPTION
ACTION
5 ERROR: Cannot access server pipe (error)
DESCRIPTION
ACTION
6 ERROR: Cannot set pipe state (error)
DESCRIPTION
ACTION
7 ERROR: Cannot contact ipc server (error)
DESCRIPTION
ACTION
8 ERROR: Invalid reply length from server (read/reply)
DESCRIPTION
ACTION
9 WARN: Reusing existing shared memory segment 'IPCSEG'
DESCRIPTION
ACTION
10 WARN: Existing parameter value = configuration, cannot change to actual
DESCRIPTION
ACTION
11 ERROR: Memory allocation failure
DESCRIPTION
ACTION
12 ERROR: Cannot initialize security descriptor (error)
DESCRIPTION
ACTION
13 ERROR: Cannot set ACL to security descriptor (error)
DESCRIPTION
ACTION
14 ERROR: Cannot create IPC mutex (error)
DESCRIPTION
ACTION
15 ERROR: Cannot create shared memory 'IPCSEG' (error)
DESCRIPTION
ACTION
16 ERROR: Cannot access Service Manager (error)
DESCRIPTION
ACTION
17 ERROR: Cannot access service 'process' (error)
DESCRIPTION
ACTION
18 ERROR: Cannot start service 'process' (error)
DESCRIPTION
ACTION
19 ERROR: Cannot query service 'process' (error)
DESCRIPTION
ACTION
20 WARN: Service 'TUXEDO IPC Helper' could not be started
DESCRIPTION
ACTION
21 WARN: All applications will exit when console user logs off
DESCRIPTION
ACTION
22 ERROR: Cannot create ipc server process 'tuxipc.exe' (error)
DESCRIPTION
ACTION
23 ERROR: Cannot create sleep semaphore 'name' (error)
DESCRIPTION
ACTION
24 ERROR: Cannot access ipc server pipe 'IPC_SERVER_PIPE' (error)
DESCRIPTION
ACTION
25 WARN: Reopening existing segment 'shmid'
DESCRIPTION
ACTION
26 ERROR: shmat: Missing segment 'shmid'
DESCRIPTION
ACTION
27 WARN: shmdt: Cannot unmap segment
DESCRIPTION
ACTION
28 ERROR: Cannot release semaphore (error)
DESCRIPTION
ACTION
29 ERROR: Cannot create timer event (error)
DESCRIPTION
ACTION
30 ERROR: Cannot duplicate main thread handle (error)
DESCRIPTION
ACTION
31 ERROR: Cannot create pause event (error)
DESCRIPTION
ACTION
32 ERROR: Cannot create timer start event (error)
DESCRIPTION
ACTION
33 ERROR: Cannot create timer thread (error)
DESCRIPTION
ACTION
34 ERROR: Cannot wait on start event (error)
DESCRIPTION
ACTION
35 ERROR: Cannot send message to timer thread threadId (error)
DESCRIPTION
ACTION
39 ERROR: Memory allocation error (line line_number)
DESCRIPTION
ACTION
40 ERROR: Cannot create watchdog start event (error)
DESCRIPTION
ACTION
41 ERROR: Cannot create watchdog thread (error)
DESCRIPTION
ACTION
42 ERROR: Removing invalid process pid
DESCRIPTION
ACTION
43 ERROR: Watchdog wait failed (error)
DESCRIPTION
ACTION
44 ERROR: Cannot create new process event (error)
DESCRIPTION
ACTION
45 ERROR: Cannot create ipc data (error)
DESCRIPTION
ACTION
46 ERROR: Cannot create server pipe 'IPC_SERVER_PIPE' (error)