---

3. CMDTUX Messages 200-299

---

201	ERROR: CLOPT parameter must be <= len characters in length
	Description	The value for CLOPT indicated by the arrow is greater than 256 characters in length.
	Action	Edit the configuration file such that all CLOPT parameters are less than or equal to 256 characters.
	See Also	ubbconfig(5)
203	ERROR: Group name must be <= len characters in length
	Description	The SRVGRP value indicated by the arrow is greater than 30 characters in length.
	Action	Edit the configuration file such that all SRVGRP values are less than or equal to 30 characters in length.
	See Also	ubbconfig(5)
205	ERROR: Group name grpname not defined in GROUPS section
	Description	The specified server group name grpname has not been defined in the GROUPS section of the configuration file.
	Action	Edit the configuration file such that the server group name is defined in the GROUPS section.
	See Also	ubbconfig(5)
207	ERROR: SRVID parameter must be >= 1 and <= 30000
	Description	The value for SRVID indicated by the arrow must be greater than or equal to 1 and less than or equal to 30000.
	Action	Specify a value for SRVID that is greater than or equal to 1 and less than or equal to 30000.
	See Also	ubbconfig(5)
209	ERROR: RQADDR parameter must be <= len characters in length
	Description	The value for RQADDR indicated by the arrow must be less than or equal to 30 characters in length.
	Action	Specify a value for RQADDR that is less than 31 characters in length.
	See Also	ubbconfig(5)
211	ERROR: RQPERM parameter must be >= 1 and <= 0777
	Description	The value for RQPERM indicated by the arrow must be between 0001 and 0777, inclusive.
	Action	Specify a value for RQPERM that is between 0001 and 0777, inclusive.
	See Also	ubbconfig(5)
213	ERROR: RPPERM parameter must be >=1 and <= 0777
	Description	The value for RPPERM indicated by the arrow must be between 0001 and 0777, inclusive.
	Action	Specify a value for RPPERM that is between 0001 and 0777, inclusive.
	See Also	ubbconfig(5)
215	ERROR: MAXGEN parameter must be >= 1 and <256
	Description	The value given for MAXGEN indicated by the arrow is invalid because it is not between 1 and 255, inclusive.
	Action	Specify a value for MAXGEN that is between 1 and 255, inclusive.
	See Also	ubbconfig(5)
217	ERROR: GRACE parameter must be >= 0
	Description	The value for GRACE indicated by the arrow is invalid because it is not greater than or equal to 0.
	Action	Specify a value for GRACE that is greater than or equal to 0.
	See Also	ubbconfig(5)
219	ERROR: SEQUENCE parameter must be > 0 and <10000
	Description	The value given for SEQUENCE indicated by the arrow is invalid because it is not between 1 and 9999, inclusive.
	Action	Specify a value for SEQUENCE that is between 1 and 9999, inclusive.
	See Also	ubbconfig(5)
220	ERROR: Duplicate SERVICES section
	Description	There is more than one SERVICES section of the configuration file defined.
	Action	Edit the configuration file such that there is only one SERVICES section.
	See Also	ubbconfig(5)
221	ERROR: GROUPS section must appear before SERVICES section
	Description	The SERVICES section is defined before the GROUPS section in the configuration file.
	Action	Edit the configuration file such that the GROUPS section is defined before the SERVICES section.
	See Also	ubbconfig(5)
222	ERROR: Could not initialize sort of SERVICES section
	Description	An internal error occurred while attempting to sort the SERVICES section during tmloadcf.
	Action	Attempt to load the configuration again via tmloadcf. If the error occurs again, contact BEA TUXEDO system Technical Support.
	See Also	ubbconfig(5), tmloadcf(1)
223	ERROR: Could not turnaround sort of SERVICES section
	Description	An internal error occurred while attempting to sort the SERVICES section of the configuration file during tmloadcf.
	Action	Attempt to load the configuration again via tmloadcf. If the error occurs again, contact BEA TUXEDO system Technical Support.
	See Also	ubbconfig(5), tmloadcf(1)
224	ERROR: Couldn't retrieve data from SERVICES sort
	Description	An internal error occurred while attempting to sort the SERVICES section of the configuration file during tmloadcf.
	Action	Attempt to load the configuration again via tmloadcf. If the error occurs again, contact BEA TUXEDO system Technical Support.
	See Also	ubbconfig(5), tmloadcf(1)
226	ERROR: Service name must be <= len characters in length
	Description	The SVCNM parameter indicated by the arrow is invalid because it is more than 15 characters in length.
	Action	Specify a service name value that is less than or equal to 15 characters in length.
	See Also	ubbconfig(5)
228	ERROR: Service service_name can't have two different ROUTING values
	Description	The indicated service name has two different routing criteria associated with it.
	Action	Edit the configuration file such that if multiple ROUTING entries exist for the same service name but have different SRVGRP parameters, the ROUTING parameter must be the same for all of these entries.
	See Also	ubbconfig(5)
229	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up a table to keep track of the information kept in the SERVERS section of the UBBCONFIG file.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
230	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up a table to keep track of the information kept in the SERVICES section of the UBBCONFIG file.
	Action	Please refer to message 229 above.
231	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up a table to keep track of the information kept in the SERVICES section of the UBBCONFIG file.
	Action	Please refer to message 229 above.
232	ERROR: Need different SRVGRP for the SERVICE svcname.
	Description	The same service has been specified more than once, but the SRVGRP parameter is absent.
	Action	Edit the UBBCONFIG file and specify different SRVGRP entries for each SVCNAME defined.
	See Also	ubbconfig(5)
233	ERROR: SERVICE svcname can't have SRVGRP srvgrp on different entry.
	Description	The same service has been specified more than once, using the same SRVGRP value.
	Action	Edit the UBBCONFIG file and specify different SRVGRP entries for each SVCNAME defined.
	See Also	ubbconfig(5)
235	ERROR: Memory allocation failure
	Description	The tmloadcf command uses the malloc() library call to obtain the internal memory that it uses for parsing the configuration file. One of these malloc() calls failed, meaning that no memory was available. It is possible that the configuration file was too large on a machine with a limited amount of free memory or swap space.
	Action	Try running tmloadcf again when the machine is less heavily loaded. Try reducing the size of the configuration file by making use of the DEFAULT parameters to set global options for each section.
	See Also	tmloadcf(1), ubbconfig(5)
237	ERROR: Failure during input to sort of SERVICES section
	Description	The tmloadcf command sorts the entries in the SERVICES section by service name. During this processing, an internal error occurred. Since sort processing uses temporary memory and disk space, the most common cause of sort failure is if these resources run out. The temporary files used for sorting are usually placed in /usr/tmp or /tmp.
	Action	Check that there is available temporary disk space in /usr/tmp and /tmp. Try running the command again when the system is less heavily loaded.
	See Also	tmloadcf(1), ubbconfig(5)
239	ERROR: The SRVGRP parameter must be <= len characters
	Description	The SRVGRP parameter in the configuration file must be a string of 30 or fewer characters.
	Action	Choose a SRVGRP value that is no more than 30 characters and make sure it matches a group name in the GROUPS section.
	See Also	tmloadcf(1), ubbconfig(5)
241	ERROR: Group name group_name must match a name from the GROUPS section
	Description	The SRVGRP parameter of the SERVERS section in the configuration file does not match an entry in the GROUPS section. This can be due to a direct error here, or a previous error while compiling the group name entry.
	Action	Correct the SRVGRP entry, or the group name entry that it is supposed to match.
	See Also	tmloadcf(1), ubbconfig(5)
243	ERROR: BUFTYPE parameter must be <= len characters
	Description	The BUFTYPE parameter in the configuration file must be a string of 256 or fewer characters.
	Action	Shorten the BUFTYPE parameter, and make sure it matches a buffer type that is in the BEA TUXEDO system buffer Type Switch.
	See Also	tmloadcf(1), ubbconfig(5)
245	ERROR: TRANTIME parameter must be >= 0 and <2147483648
	Description	The TRANTIME parameter was outside the allowable numeric range.
	Action	Specify a value that is 0 or greater and less than 2,147,483,648.
	See Also	tmloadcf(1), ubbconfig(5)
247	ERROR: *ROUTING routingname must be <= len characters
	Description	The routingname of the ROUTING section of the configuration file must be <= 15 characters.
	Action	Specify a value that is less than or equal to 15 characters.
	See Also	tmloadcf(1), ubbconfig(5)
249	ERROR: LOAD parameter must be >= 1 and <= 32767
	Description	The LOAD parameter in the SERVICES section of the configuration file must be within the proper range of values.
	Action	Specify a value that is between 1 and 32,767.
	See Also	tmloadcf(1), ubbconfig(5)
251	ERROR: PRIO parameter must be >= 1 and <= 100
	Description	The PRIO parameter in the SERVICES section of the UBBCONFIG must be within the proper range of values.
	Action	Specify a value that is between 1 and 100, inclusive.
	See Also	tmloadcf(1), ubbconfig(5)
252	ERROR: Duplicate ROUTING section present
	Description	A second ROUTING section was encountered in the configuration file. Only one is allowed.
	Action	Place all routing entries within a single ROUTING section.
	See Also	tmloadcf(1), ubbconfig(5)
253	ERROR: The GROUPS section must appear before the ROUTING section
	Description	The ROUTING section appeared in the configuration file before any GROUPS section appeared. This could be due to the sections being out of order or missing.
	Action	Make sure that the GROUPS section appears before the ROUTING section.
	See Also	tmloadcf(1), ubbconfig(5)
255	ERROR: Routing name must be <= len characters
	Description	The ROUTING identifier must be <= 15 characters.
	Action	Specify a value that is less than or equal to 15 characters.
	See Also	tmloadcf(1), ubbconfig(5)
256	ERROR: FIELD parameter missing in ROUTING entry routingname
	Description	Each entry in the ROUTING section of the configuration file must have a FIELD parameter.
	Action	Specify a FIELD value for each entry that is the name of the routing field.
	See Also	tmloadcf(1), ubbconfig(5)
257	ERROR: RANGES parameter missing in ROUTING entry routingname
	Description	Each entry in the ROUTING section of the configuration file must have a RANGES parameter.
	Action	Specify a RANGES value for each entry that specifies the ranges and associated server groups for the routing field.
	See Also	tmloadcf(1), ubbconfig(5)
258	ERROR: BUFTYPE parameter missing in ROUTING entry routingname
	Description	Each entry in the ROUTING section of the configuration file must have a BUFTYPE parameter.
	Action	Specify a BUFTYPE value that is a list of types and subtypes of data buffers for which this routing entry is valid.
	See Also	tmloadcf(1), ubbconfig(5)
260	ERROR: FIELD parameter must be <= len characters in length
	Description	The Field name in the ROUTING section must be less than 30 characters in length.
	Action	Specify a FIELD name that is less than 30 characters long.
	See Also	tmloadcf(1), ubbconfig(5)
262	ERROR: RANGES parameter must be <= len characters
	Description	The RANGES string in the ROUTING section was greater than 256 characters in length.
	Action	Shorten the RANGES string and re-load the configuration file.
	See Also	tmloadcf(1), ubbconfig(5)
264	ERROR: BUFTYPE parameter must be <= len characters
	Description	The BUFTYPE parameter was greater than 256 characters.
	Action	Shorten the BUFTYPE parameter and re-load the configuration file.
	See Also	tmloadcf(1), ubbconfig(5)
265	ERROR: More than one NETWORK section is present
	Description	A UBBCONFIG file can only have one NETWORK section. More than one NETWORK section was encountered while processing the UBBCONFIG file.
	Action	Check the UBBCONFIG file for the NETWORK keyword. It is possible that an editing error left an extra copy of that line.
	See Also	tmloadcf(1), ubbconfig(5)
266	ERROR: The MACHINES section must precede the NETWORK section
	Description	The NETWORK section of the UBBCONFIG file was encountered before any MACHINES section. The information in the MACHINES section is needed to process the NETWORK section.
	Action	Check if a MACHINES section is in the UBBCONFIG file. If it is, place it before the NETWORK section.
	See Also	tmloadcf(1), ubbconfig(5)
272	ERROR: NETWORK LMID lmid does not appear in MACHINES section
	Description	The LMID identifier lmid in the NETWORK section of the UBBCONFIG file did not appear in the MACHINES section. The LMID parameter is the identifier at the beginning of the line, and does not appear with the keyword LMID.
	Action	Make sure that the LMID is spelled correctly, and has a matching entry in the MACHINES section.
	See Also	tmloadcf(1), ubbconfig(5)
274	ERROR: NADDR parameter missing in NETWORK entry lmid
	Description	The entry for lmid in the NETWORK section has no NADDR parameter. This parameter is required.
	Action	Add a NADDR parameter to the NETWORK entry.
	See Also	tmloadcf(1), ubbconfig(5)
276	ERROR: NADDR parameter must be <= len characters in length
	Description	The NADDR parameter in the NETWORK section of the UBBCONFIG file must be <= len characters.
	Action	Shorten the NADDR parameter and re-load the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
278	ERROR: There is an invalid hexadecimal digit in the NADDR parameter
	Description	The NADDR parameter in the NETWORK section of the UBBCONFIG file was specified as a hexadecimal number (starting with 0x or \x), but a non-hexadecimal character was encountered in the string.
	Action	Enter hexadecimal characters in the NADDR parameter and re-load the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
280	ERROR: NADDR parameter must contain an even number of hex digits.
	Description	The NADDR parameter in the NETWORK section of the UBBCONFIG file was specified as a hexadecimal number (starting with 0x or \x). This requires that there be an even number of characters following the prefix.
	Action	Correct the NADDR to have an even number of hexadecimal characters and re-load the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
282	ERROR: BRIDGE parameter must be an absolute pathname
	Description	The BRIDGE parameter in the NETWORK section of the UBBCONFIG file must be an absolute pathname of the network device. This means it must begin with a '/' character.
	Action	Replace the current BRIDGE parameter with the full pathname of the device, for example, "/dev/tcp".
	See Also	tmloadcf(1), ubbconfig(5)
284	ERROR: NLSADDR parameter must be <= len characters
	Description	The NLSADDR parameter in the NETWORK section of the UBBCONFIG file must be <= len characters.
	Action	Change the NLSADDR parameter to be 78 characters or less and reload the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
286	ERROR: There is an invalid hexadecimal digit in the NLSADDR parameter
	Description	The NLSADDR parameter in the NETWORK section of the UBBCONFIG file was specified as a hexadecimal number (starting with 0x or \x), but a non-hexadecimal character was encountered in the string.
	Action	Enter hexadecimal characters in the NLSADDR parameter and re-load the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
288	ERROR: NLSADDR parameter must contain an even number of hex digits
	Description	The NLSADDR parameter in the NETWORK section of the UBBCONFIG file was specified as a hexadecimal number (starting with 0x or \x). This requires that there be an even number of characters following the prefix.
	Action	Correct the NLSADDR to have an even number of hexadecimal characters and re-load the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
290	ERROR: NETID parameter must be >=0 and <=256
	Description	The NETID is an undocumented parameter in the UBBCONFIG file, used for internal testing purposes. It should not be used by the end user.
	Action	Remove the NETID parameter or change its value to be in the range 1-255.
	See Also	tmloadcf(1), ubbconfig(5)
291	ERROR: Failure opening TUXCONFIG section sectionname (vtoc_error=vtoc_errno)
	Description	The TUXCONFIG file is a binary file in the BEA TUXEDO VTOC format. Each section of the UBBCONFIG file (RESOURCES, MACHINES, etc.) is stored as a separate table in the TUXCONFIG file. While trying to update the TUXCONFIG file, tmloadcf got an error trying to open the specified sectionname. The section of the TUXCONFIG and a low level error code are printed in this message.
	Action	If the TUXCONFIG VTOC is only being used to hold the TUXCONFIG tables (and not the TLOG or a BEA TUXEDO/D database), then the first thing to try is to recreate a new TUXCONFIG. If the TUXCONFIG is a UNIX file, simply remove it. If it is stored on a raw disk, erase it by entering: echo " " >$TUXCONFIG If the error persists, check for disk-type error conditions that might cause problems writing to files. Finally, contact BEA TUXEDO system Technical Support, making sure to have the vtoc_errno that was printed in the error message.
	See Also	tmloadcf(1), ubbconfig(5)
292	ERROR: Error writing RESOURCES section of the TUXCONFIG file (vtoc_errno= vtoc_errno)
	Description	The TUXCONFIG file is a binary file in the BEA TUXEDO VTOC format. Each section of the UBBCONFIG file (RESOURCES, MACHINES, etc.) is stored as a separate table in the TUXCONFIG file. An error occurred while trying to write to the RESOURCES section of the TUXCONFIG.
	Action	If the TUXCONFIG file is a UNIX file, the file system that it is in should be checked to see if it has enough free space. The file should be checked to see if its permissions allow writing. If the TUXCONFIG VTOC is being used only to hold the TUXCONFIG tables (and not the TLOG or a BEA TUXEDO/D database), then the first thing to try is to recreate a new TUXCONFIG. If the TUXCONFIG is a UNIX file, simply remove it. If it is stored on a raw disk, erase it by entering: echo " " >$TUXCONFIG If the error persists, check for disk-type error conditions that might cause problems writing to files. Finally, contact BEA TUXEDO system Technical Support, making sure to have the vtoc_errno that was printed in the error message.
	See Also	tmloadcf(1), ubbconfig(5)
293	ERROR: Failed to write the TUXCONFIG file (vtoc_errno=vtoc_errno).
	Description	The TUXCONFIG file is a binary file in the BEA TUXEDO VTOC format. Each section of the UBBCONFIG file (RESOURCES, MACHINES, etc.) is stored as a separate table in the TUXCONFIG file. An error occurred while writing to a section of the TUXCONFIG.
	Action	If the TUXCONFIG file is a UNIX file, the file system that it is in should be checked to see if it has enough free space. The file should be checked to see if its permissions allow writing. If the TUXCONFIG VTOC is being used to hold only the TUXCONFIG tables (and not the TLOG or a BEA TUXEDO/D database), then the first thing to try is to recreate a new TUXCONFIG. If the TUXCONFIG file is a UNIX file, simply remove it. If it is stored on a raw disk, erase it by entering: echo " " >$TUXCONFIG If the TUXCONFIG VTOC is being used to hold only the TUXCONFIG tables (and not the TLOG or a BEA TUXEDO/D database), then the first thing to try is to recreate a new TUXCONFIG. If the TUXCONFIG file is a UNIX file, simply remove it. If it is stored on a raw disk, erase it by entering: If the error persists, check for disk-type error conditions that might cause problems writing to files. Finally, contact BEA TUXEDO system Technical Support, making sure to have the vtoc_errno that was printed in the error message.
	See Also	tmloadcf(1), ubbconfig(5)

---

---