---

8. CMDTUX Messages 700-799

---

700	ERROR: Group's current location inconsistent with TUXCONFIG file
	Description	The location of a server group was being updated in the master copy of the TUXCONFIG file, to reflect a new location after migration. The new location unexpectedly did not match either the primary or backup specified in the TUXCONFIG file.
	Action	The master machine's TUXCONFIG is inconsistent with the group's real location. The file can be restored by shutting down the application, and then running tmloadcf using a backup ASCII version of the configuration file. Running tmunloadcf on another machine in the configuration should provide a recent backup version.
	See Also	tmloadcf(1), tmunloadcf(1), ubbconfig(5)
730	ERROR: Memory allocation failure
	Description	This error occurred while attempting to shut down a partitioned lmid and its associated servers.
	Action	Remove processes that may be tying up physical memory, ensure that the application ipckey is correct, or verify that the UNIX sysgen process sizing parameters are correct.
	See Also	tmshutdown(1)
731	ERROR: for debug level
	Description	A non-numeric argument was specified with the debugging option of tmboot or tmshutdown, causing the process to abort.
	Action	Specify a numeric value for the debugging level command line option.
732	ERROR: for srvid
	Description	The argument for the -i option of tmboot or tmshutdown is not a numeric value between 1 and 30,000.
	Action	Specify a numeric value between 1 and 30,000.
	See Also	tmboot(1), tmshutdown(1), ubbconfig(5)
733	ERROR: for sequence number
	Description	The argument for the -o option of tmboot or tmshutdown is not a numeric value between 1 and 9,999.
	Action	Specify a numeric value between 1 and 9,999.
	See Also	tmboot(1), tmshutdown(1), ubbconfig(5)
734	ERROR: for delay
	Description	The argument for the -w option of tmshutdown is not a number greater than 0.
	Action	Specify a numeric value greater than 0.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1), ubbconfig(5)
735	ERROR: Memory allocation failure
	Description	This error occurred while booting the MASTER machine.
	Action	Remove processes that may be tying up physical memory, ensure that the application ipckey is correct, or verify that the UNIX sysgen process sizing parameters are correct.
	See Also	tmboot(1)
737	ERROR: tmboot too many arguments
	Description	An argument is present that does not match the options selected for tmboot, or no options are specified and an argument is passed.
	Action	Resubmit after verifying the command line options.
	See Also	BEA TUXEDO Administrator's Guide, tmboot(1)
738	ERROR: -R option requires either the -g or -l option
	Description	A shutdown request with the -R option shuts down servers on their original processors to prepare them for migration to another processor. This option must be used with either the group name, -g grpname, or logical name, -l lmid, option.
	Action	Resubmit the command and specify either the -g or -l option that contains the servers to be shut down and eventually migrated.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
739	ERROR: -A option not allowed with -R
	Description	A shutdown request with the migration option, -R, has been issued with the administrative servers option, -A. This request isn't valid, since migration is specific to server groups through options -l or -g, not administrative servers.
	Action	Resubmit tmshutdown with either option -R to shut down the servers specified for migration, or after all the servers in the SERVERS section of the configuration file have been shut down, the -A option may be used to shut down the administrative servers.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
740	ERROR: -S option not allowed with -R
	Description	A shutdown request with the -R option has been issued with the -S option specifying that all servers in the SERVERS section of the configuration file should be shut down for migration. This request isn't valid since the -R option must be used with either option -l or -g.
	Action	Resubmit tmshutdown without the -S option and instead specify the servers to be shut down by the -l lmid or -g grpname options that contain these server groups.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
741	ERROR: -B option not allowed with -R
	Description	A shutdown request with the migration, -R, option has been issued with the BBL, -B, option. A BBL may not be shut down for migration.
	Action	Resubmit tmshutdown without the -B option and instead specify the servers to be shut down by the -l lmid or -g grpname options that contain these server groups.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
742	ERROR: -T option not allowed with -R
	Description	A shutdown request with the migration, -R, option has been issued with the TMS servers, -T, option. A TMS may not be shut down for migration.
	Action	Resubmit tmshutdown without the -T option and instead specify the servers to be shut down by the -l lmid or -g grpname options that contain these server groups.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
743	ERROR: -H option not allowed with -R
	Description	A shutdown request with the migration, -R, option has been issued with the -H option to shut down all administrative and application servers on a specified processor. This request isn't valid since migration is specific to server groups through options -l or -g, not administrative servers.
	Action	Resubmit tmshutdown with the -l option to specify the servers to be shut down on the specified processor for migration.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
744	ERROR: -i option not allowed with -R
	Description	A shutdown request with the migration, -R, option has been issued with the -i srvid option which will shut down all servers in the SERVERS section of the configuration file whose SRVID parameter is srvid. This request isn't valid since the -R option must be used with either option -l or -g.
	Action	Resubmit tmshutdown without the -i option and instead specify the servers to be shut down by the -l lmid or -g grpname options that contain these server groups.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
745	ERROR: -o option not allowed with -R
	Description	A shutdown request with the migration, -R, option has been issued with the -o sequence option which will shut down all servers in the SERVERS section of the configuration file whose SEQUENCE parameter is sequence. This request isn't valid since the -R option must be used with either option -l or -g.
	Action	Resubmit tmshutdown without the -o option and instead specify the servers to be shut down by the -l lmid or -g grpname options that contain these server groups.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
746	ERROR: -s option not allowed with -R
	Description	A shutdown request with the migration, -R, option has been issued with the -s aout option which will shut down all servers in the SERVERS section of the configuration file whose name is aout. This request isn't valid since the -R option must be used with either option -l or -g.
	Action	Resubmit tmshutdown without the -s option and instead specify the servers to be shut down by the -l lmid or -g grpname options that contain these server groups.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
754	ERROR: error processing configuration file
	Description	When booting or shutting down an application, tmboot or tmshutdown attempts to load in the TUXCONFIG file. At this point the configuration file defined by the environment variable TUXCONFIG cannot be found or has been corrupted.
	Action	The value of the TUXCONFIG environment variable should be checked to see if it set to the correct configuration file and exported. After ensuring that this variable is set correctly and the same failure occurs, the TUXCONFIG file has been corrupted. The TUXCONFIG file must be regenerated by the tmloadcf command from the UBBCONFIG file.
	See Also	tmboot(1), tmloadcf(1), tmshutdown(1), ubbconfig(5)
755	ERROR: -R option not allowed if MIGRATE not specified
	Description	A shutdown request with the -R option has been issued for a configuration that does not have the MIGRATE option specified in the UBBCONFIG file.
	Action	To enable migration for an application in this situation, the application must be shut down, and the configuration must be updated to include the MIGRATE option (in the RESOURCES section). Then the TUXCONFIG file must be recompiled using tmloadcf, and after the application is brought back up, migration may be performed.
	See Also	BEA TUXEDO Administrator's Guide, tmboot(1), tmloadcf(1), tmshutdown(1), ubbconfig(5)
756	ERROR: -P option not allowed on non-partitioned node
	Description	A shutdown request with the -P option has been issued on a non-partitioned node. The -P option is specifically used for nodes that are partitioned (there is no access with the DBBL).
	Action	To shut down servers on this lmid, the -l option may be used.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
757	ERROR: Could not reset model to MP for partitioned shutdown
	Description	A BEA TUXEDO system internal value was not set correctly. Check the userlog for additional error messages to clarify this error condition. The circumstances associated with this error are not likely to be caused by something that the invoker of the tmshutdown command will have done. It is more likely to be a BEA TUXEDO system error.
	Action	Try repeating the same operation. If this fails with the same error, contact your BEA TUXEDO system Technical Support.
	See Also	tmshutdown(1)
758	ERROR: Could not attach to local BB for partitioned shutdown
	Description	While trying to connect to the local bulletin board to complete the partitioned shutdown request, an error occurred in the initialization phase. There are several scenarios that may eventually cause this error, including a corrupted TUXCONFIG file, authentication failure, and invalid buffer types. Also, the tpinfo buffer could contain illegal values.
	Action	Check the userlog for error messages to clarify the problem. If the cause cannot be discerned, contact your BEA TUXEDO system Technical Support.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
759	ERROR: Could not bring up temp DBBL for partitioned shutdown
	Description	While trying to process a partitioned shutdown request, a temporary DBBL process must be booted. An error occurs such as running the command on a machine that is not partitioned. Or while starting the pseudo-DBBL, the original DBBL is still reachable through another bridge from the "partitioned" site.
	Action	Determine if the machine is partitioned (by using the tmadmin command psr). Check the userlog for error messages to clarify the problem. If the machine is partitioned and this error occurs again, contact your BEA TUXEDO system Technical Support.
	See Also	BEA TUXEDO Administrator's Guide, tmadmin (1), tmshutdown(1)
760	ERROR: Failed to attach to temp DBBL for partitioned shutdown
	Description	The tmadmin process was unable to attach itself to the Bulletin Board to perform the requested action. Check the userlog for additional error messages to clarify the problem.
	Action	Try repeating the command again. If it fails in the same manner, contact your BEA TUXEDO system Technical Support.
	See Also	BEA TUXEDO Administrator's Guide, tmshutdown(1)
761	ERROR: Illegal TUXCONFIG value
	Description	The value of the TUXCONFIG environment variable and the caller process and the value for the machine set in the UBBCONFIG file are inconsistent.
	Action	Reset the TUXCONFIG variable and rerun the command.
	See Also	ubbconfig(5)
762	ERROR: LAN mode not specified for multiple node application
	Description	The OPTIONS parameter in the RESOURCES section must specify the LAN option for a multiple node application.
	Action	Change the application configuration to ensure that the OPTIONS parameter in the RESOURCES section includes the LAN value.
	See Also	ubbconfig(5)
763	ERROR: cannot create internal BB tables
	Description	While booting, an application error in attaching to the shared memory has occurred.
	Action	Contact your BEA TUXEDO system Technical Support.
	See Also	tmboot(1)
764	ERROR: can't attach to BB
	Description	While shutting down an application, an error in attaching to the configuration bulletin board has occurred.
	Action	Check the userlog for additional diagnostic messages. Normally this error implies that the TUXCONFIG environment variable is not set correctly, or that the application is not booted.
	See Also	tmshutdown(1)
765	ERROR: must run on master node
	Description	tmboot must be run on either of the master nodes specified in the MASTER parameter of the RESOURCES section. tmshutdown must be run on the active master.
	Action	Reissue the boot or shutdown command on the proper processing element.
	See Also	tmboot(1), tmshutdown(1)
766	ERROR: must run on master node
	Description	A boot request is issued from the backup master node specified in the configuration. Or, the system cannot find a DBBL process in the system during a shutdown request.
	Action	Reissue the boot request from the master specified in the configuration. If this error results from a shutdown request, make sure that there is a DBBL process running before reissuing the request.
	See Also	tmboot(1), tmshutdown(1)
767	ERROR: must run on master node
	Description	A shutdown request is issued from the master node specified in the configuration. However, this is no longer the active master, since the original master has been migrated.
	Action	Reissue the shutdown request from the active master.
	See Also	tmshutdown(1)
768	ERROR: Bad LMID (lmid) in command line option(s)
	Description	The argument lmid specified for the command line option is invalid.
	Action	Check the configuration for the correct lmid value and reissue the command.
	See Also	tmboot(1), tmshutdown(1)
769	ERROR: Server group name (grpname) too long
	Description	The group name specified for the command line option is too long. The server group name must be less than or equal to 30 characters.
	Action	Check the configuration for the correct group name and reissue the command.
	See Also	tmboot(1), tmshutdown(1), ubbconfig(5)
770	ERROR: Invalid server group name (grpname)
	Description	The group name specified for this command is not in the configuration.
	Action	Check the configuration for the correct group name and reissue the command.
	See Also	tmboot(1), tmshutdown(1), ubbconfig(5)
771	ERROR: Bad command line options! Check the LOG file
	Description	An invalid command line option was specified that resulted in a fatal error.
	Action	Check the userlog file to determine the exact cause of the error.
	See Also	tmboot(1), tmshutdown(1), ubbconfig(5)
772	ERROR: can't get (D)BBL's table entry
	Description	While shutting down the system, a server table entry is in an inconsistent state.
	Action	Contact your BEA TUXEDO system Technical Support.
777	INFO: See ULOG for complete process status
	Description	This message reminds the user that there is more information available in the userlog.
	Action	No action required.
786	ERROR: Memory allocation failure
	Description	During shutdown, memory could not be allocated for an internal structure that holds process information.
	Action	Remove processes that may be tying up physical memory, ensure that the application ipckey is correct, or verify that the UNIX sysgen process sizing parameters are correct.
787	ERROR: Memory allocation failure
	Description	During shutdown, memory could not be allocated for an internal structure that holds process information.
	Action	Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
788	ERROR: Memory allocation failure
	Description	During shutdown, memory could not be allocated for an internal structure that holds process information.
	Action	Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
790	INFO: *Interrupt* Want to Continue? (y/n):
	Description	The system was being shut down when an alarm was turned on.
	Action	You may proceed with the shutdown request by entering 'y', or you may abort the request by entering 'n'.
794	ERROR: Memory allocation failure
	Description	During tmboot, memory could not be allocated for an internal structure that holds process information.
	Action	Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
795	ERROR: Memory allocation failure
	Description	During tmboot, memory could not be allocated for an internal structure that holds process information.
	Action	Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
796	ERROR: Cannot continue booting without DBBL
	Description	During the booting sequence for a multiprocessing configuration, the DBBL process is required to be booted before the BBLs may be booted. However, the DBBL has not been booted.
	Action	Make sure that the DBBL is running on the master node. If the DBBL is in fact running, contact your BEA TUXEDO system Technical Support. Otherwise, the DBBL must be booted (unless all of the admin processes are started at the same time with tmboot -A).
	See Also	tmboot(1)
797	ERROR: No BBL available for boot of BRIDGE on lmid
	Description	The BRIDGE process requires that a BBL is present on that lmid. The BBL is not currently available.
	Action	The BBL may be booted explicitly using tmboot -B lmid and the original command retried.
	See Also	tmboot(1)
798	ERROR: Cannot boot remote BBL(lmid1), no BRIDGE available on DBBLs node(lmid2)
	Description	The BRIDGE process on the DBBL's node, lmid2, must be present to boot the BBL on lmid1 as requested.
	Action	Contact your BEA TUXEDO system Technical Support.
799	ERROR: Cannot boot remote BBL(lmid), machine inaccessible
	Description	The node lmid is inaccessible and the BBL may not be booted as requested.
	Action	Verify that the node lmid is running. If so, contact your BEA TUXEDO system Technical Support.

---

---