---

11. CMDTUX Messages 1000-1099

---

1001	ERROR: The MAXCONV parameter must be > 0 and < 32768.
	Description	The MAXCONV parameter in the UBBCONFIG file must be greater than zero and less than 32768.
	Action	Correct the value for MAXCONV as specified in the RESOURCES section of the UBBCONFIG file to be greater than 0 and less than 32768.
	See Also	tmloadcf(1), ubbconfig(5)
1002	ERROR: The MIN parameter must be >=1 and <= 1000
	Description	The MIN parameter in the UBBCONFIG SERVERS section must be greater than or equal to 1 and less than or equal to 1000.
	Action	Correct the value for MIN as specified in the SERVERS section of the UBBCONFIG file to be greater than 0 and less than or equal to 1000.
	See Also	tmloadcf(1), ubbconfig(5)
1003	ERROR: The MAX parameter must be >=1 and = 1000
	Description	The MAX parameter in the UBBCONFIG SERVERS section must be greater than or equal to 1 and less than or equal to 1000.
	Action	Correct the value for MAX as specified in the SERVERS section of the UBBCONFIG file to be greater than or equal to 1 and less than or equal to 1000.
	See Also	tmloadcf(1), ubbconfig(5)
1021	ERROR: The Primary and Backup LMIDs for a Group can't be the same.
	Description	In the GROUPS section of the UBBCONFIG file, a group was specified as having a Backup machine (using the LMID,LMID syntax), but the LMIDs were the same. The Backup must be on a different machine from the Primary.
	Action	Correct the value for LMID as specified in the GROUPS section of the UBBCONFIG so that the primary and backup machine names are different, or specify only one machine name.
	See Also	tmloadcf(1), ubbconfig(5)
1022	WARN: The MIGRATE option was given without any Backup LMIDs present.
	Description	The MIGRATE keyword appeared in the OPTIONS parameter in the RESOURCES section of the UBBCONFIG file, but neither a Group nor the Master were given Backup LMIDs (using the LMID,LMID syntax). Note that some versions of BEA TUXEDO system R4.2 have a bug where this warning will appear even though a backup Master machine was specified.
	Action	Make sure that either the Master machine was made migratable (using the LMID,LMID syntax for the MASTER parameter), or that at least one group was migratable (using LMID,LMID in the LMID parameter in the GROUPS section). If only the Master is migratable, and the configuration looks ok, then this warning is probably due to the bug mentioned in the description. The message can be ignored in this case.
	See Also	tmloadcf(1), ubbconfig(5)
1036	ERROR: The AUTHSVC parameter is NULL or longer than len characters.
	Description	The AUTHSVC parameter in the RESOURCES section of the UBBCONFIG file must be a Service name that is less than or equal to 15 characters long.
	Action	Change the AUTHSVC parameter in the UBBCONFIG file and re-load the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
1037	ERROR: MAXWSCLIENTS must be >= 0 and < 32768.
	Description	The MAXWSCLIENTS parameter is outside the allowable range of values.
	Action	Change the MAXWSCLIENTS parameter to be in the allowable range of values and re-load the configuration.
	See Also	tmloadcf(1), ubbconfig(5)
1056	ERROR: Can't get Application Password
	Description	When the SECURITY option is defined in the UBBCONFIG file, tmloadcf tries to get a password from the user. If the standard input is connected to a terminal, tmloadcf prompts for the password interactively. If not, it looks at the APP_PW environment variable. This error happens if tmloadcf cannot open the tty device for prompting, or if APP_PW is not set.
	Action	If running tmloadcf from a script, make sure that APP_PW is set and exported into the environment. Otherwise, contact your BEA TUXEDO system Technical Support.
	See Also	tmloadcf(1), ubbconfig(5)
1057	WARN: Passwords do not match. Try again.
	Description	tmloadcf prompts for the application password twice. If the two entries do not match, this message appears, and the sequence is repeated. Three separate tries are allowed.
	Action	Re-enter the password correctly.
	See Also	tmloadcf(1), ubbconfig(5)
1058	ERROR: Too many failures to obtain application password.
	Description	After three failed attempts to read the application password, the tmloadcf program gives up and prints this message.
	Action	Re-load the configuration again, entering matching password values.
	See Also	tmloadcf(1), ubbconfig(5)
1070	ERROR: Unable to forward message, sending it back
	Description	A server cleanup was underway. While draining the request queue, a function executed to (possibly) convert from one BEA TUXEDO system release to another failed. The possible causes of this error are: attempting to send a message that has an incorrect release identifier in the message header, or sending a message to a site with an unknown release.
	Action	Please examine the userlog for further information. If necessary, please contact the BEA TUXEDO system Administrator.
1071	ERROR: Unable to forward message, sending it back
	Description	A server cleanup was underway. While attempting to forward messages, a function executed to (possibly) convert from one BEA TUXEDO system release to another failed. The possible causes of this error are: attempting to send a message that has an incorrect release identifier in the message header, or sending a message to a site with an unknown release.
	Action	Please examine the userlog for further information. If necessary, please contact the BEA TUXEDO system Administrator.
1072	ERROR: Unable to process reply
	Description	A server cleanup was underway. While draining the reply queue, a function executed to (possibly) convert from one BEA TUXEDO system release to another failed. The possible causes of this error are: attempting to send a message that has an incorrect release identifier in the message header, or sending a message to a site with an unknown release.
	Action	Please examine the userlog for further information. If necessary, please contact the BEA TUXEDO system;Administrator.
1073	WARN: Client process pid-dropped message because server died, SERVICE=service_name
	Description	A server cleanup was underway. The BEA TUXEDO system logs a message to the userlog file indicating that the server had been cleaned up.
	Action	Please examine the userlog for further information. If necessary, please contact the BEA TUXEDO system Administrator.
1074	WARN: Client process pid-dropped message because server and client died, SERVICE=service_name
	Description	A server cleanup was underway. The BEA TUXEDO system logs a message to the userlog file indicating that the server and client had died.
	Action	Please examine the userlog for further information. If necessary, please contact the BEA TUXEDO system Administrator.
1081	ERROR: Unable to read RESOURCES section of TUXCONFIG file
	Description	A server cleanup was underway. The BEA TUXEDO system was unable to get information on the RESOURCES section from the TUXCONFIG file. Additional information from the userlog will indicate why the System was unable to do so. For example, the TUXCONFIG environment variable may not have been set.
	Action	Please examine the userlog for further information. If necessary, please contact the BEA TUXEDO system Administrator.
1082	ERROR: Execute permission denied, not application administrator
	Description	A server cleanup had been attempted, but the executor of this command did not have the proper permissions to execute the cleanupsrv command.
	Action	Please contact the BEA TUXEDO system Administrator.
1089	ERROR: Unable to read the RESOURCES section of the TUXCONFIG file
	Description	The restartsrv process was not able to read the RESOURCES section of the TUXCONFIG file.
	Action	The shared memory might be corrupted. Check the permissions on all IPC or contact your BEA TUXEDO system Technical Support. See LIBTUX_CAT Message 607 for further explanation.
1090	ERROR: Execute permission denied, not application administrator
	Description	Execute permission was denied when a non-administrator was executing the restartsrv process.
	Action	Only the BEA TUXEDO system application administrator can execute the command.
1091	ERROR: Invalid option, duplicate option option
	Description	The tlisten -d option was passed twice at the command line.
	Action	Invoke the tlisten command with only one -d option.
	See Also	tlisten(1)
1092	ERROR: tlisten could not set group id to group_id
	Description	The tlisten process failed to reset its group id.
	Action	Verify that the user name or user id passed as an argument to the -u option has a valid entry in the /etc/passwd file.
	See Also	tlisten(1)
1096	ERROR: Could not send broadcast to BBL (machine)
	Description	A tpbroadcast message could not be sent to the BBL process on machine, because the message send operation failed. Clients on machine will not receive the broadcast. A likely cause is UNIX system message queue blocking on the DBBL 's machine. The BRIDGE 's message queue may be full, or the total amount of message queue buffer space in the kernel may be exhausted. The ipcs -aq shell command is one way to verify this.
	Action	Check the machine's kernel parameters related to message queuing: MSGMNB, MSGSEG, MSGSSZ, and MSGMAX. Increase them if this seems reasonable. Check for any networking problems that might cause the BRIDGE to run slowly. Check for performance problems causing overload on the machine. Reduce the frequency of broadcasts.
	See Also	BEA TUXEDO Installation Guide, tpbroadcast(3c), ipcs(1) in UNIX reference manuals
1097	WARN: DBBL should not be receiving notifications
	Description	A tpnotify request for asynchronous client notification message should go directly to the BBL process on the client's machine. One was unexpectedly received by the DBBL process, which ignored it.
	Action	Contact your BEA TUXEDO system Technical Support.
	See Also	tpnotify(3c)
1098	ERROR: Can't create queue
	Description	Queues used for communication with the (D)BBL could not be created.
	Action	Examine the userlog for further details. Contact your BEA TUXEDO system Technical Support.

---

---