---

24. CMDTUX Messages 4200-4299

---

4206	WARN: The -L option is obsolete. Logging will go to the userlog
	Description	In release 6.1 and earlier, the -L option specified the log file for the tlisten process. In later releases, all logging goes to the userlog and this option is ignored.
	Action	No action required.
	See Also	tlisten(1)
4207	ERROR: Could not become a background process
	Description	Normally, the tlisten process starts as a background program automatically. The program could not be restarted in the background and will not run.
	Action	Check for other messages in the event log. Determine if there is an OS resource that is exhausted and re-try the command when it is resolved.
	See Also	tlisten(1)
4208	WARN: The -L option is obsolete
	Description	In release 6.1 and earlier, the -L option specified the log file for the tlisten process. In later releases, all logging goes to the userlog and this option is ignored.
	Action	No action required.
	See Also	tlisten(1)
4209	INFO: Accepted request from fd, seq # number
	Description	The tlisten process will log the fact that it was able to accept a new connection, after successfully establishing a listening endpoint and opening an accept endpoint on the network. The listening endpoint connection descriptor, fd, and sequence number, number, are placed in the event log.
	Action	No action required.
	See Also	tlisten (1)
4215	INFO: SRVID=srvid SRVGRP=grpname SIGTERM sent
	Description	A SIGTERM signal was sent to a server in response to a "tmshutdown -w" command or a TMIB request to set the server state to "DEAd".
	Action	No action required.
	See Also	tmshutdown (1), TM_MIB(5)
4217	INFO: SRVID=srvid SRVGRP=grpname SIGKILL sent
	Description	A SIGKILL signal was sent to a server in response to a "tmshutdown -w" command or a TMIB request to set the server state to "DEAd".
	Action	No action required.
	See Also	tmshutdown (1), TM_MIB(5)
4218	ERROR: Cannot send message to tlisten
	Description	While trying to propagate the TUXCONFIG to a non-master machine, a failure occurred in contacting the tlisten program.
	Action	Check for other messages in either the local or remote event log.
	See Also	tlisten(1), TM_MIB(5)
4219	ERROR: Cannot send message to tlisten
	Description	While trying to propagate the TUXCONFIG to a non-master machine, a failure occurred in contacting the tlisten program.
	Action	Check for other messages in either the local or remote event log.
	See Also	tlisten(1), TM_MIB(5)
4221	ERROR: Cannot become a client - tpinit() failed - errmsg
	Description	The administrative client sbbl could not join the application
	Action	There may be too many people attempting to perform MIB operations at the same time. Only 9 sbbl servers may be run at a time, so that if there are more than 9 MIB operations which occur simultaneously, this message may appear. Limit the number of concurrent MIB operations.
4222	ERROR: Memory allocation failure
	Description	The system ran out of memory in the sbbl process
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4223	ERROR: Cannot open file
	Description	The sbbl process has attempted to open its input file and failed
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. If it seems that there should be enough file descriptors for this operation, contact your BEA TUXEDO system Technical Support.
4224	ERROR: Cannot read from file
	Description	The sbbl process has attempted to read its input file and failed
	Action	Contact your BEA TUXEDO system Technical Support.
4225	ERROR: Cannot open file
	Description	While attempting to boot, the MIB has attempted to open a temporary output file and failed.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough file descriptors and disk space for this operation, contact your BEA TUXEDO system Technical Support.
4226	ERROR: Cannot write to file
	Description	During a boot sequence, the MIB has attempted to write to its output file and failed.
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough disk space for this operation, contact your BEA TUXEDO system Technical Support.
4227	ERROR: Cannot open file
	Description	While attempting to shutdown, the MIB has attempted to open a temporary output file and failed.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough file descriptors and disk space for this operation, contact your BEA TUXEDO system Technical Support.
4228	ERROR: Cannot write to file
	Description	During a shutdown sequence, the MIB has attempted to write to its output file and failed
	Action	The file system /tmp may be full. The directory where temporary files are placed may be full. If it seems that there should be enough disk space for this operation, contact your BEA TUXEDO system Technical Support.
4229	ERROR: Cannot allocate memory for tmconfig class attribute table
	Description	Memory allocation failed while retrieving MIB attributes.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4230	ERROR: tpcall() returned no configured class attribute for section fieldid
	Description	While retrieving MIB attribute information, a failure occurred, so the tmconfig operation will fail.
	Action	Check the log for related messages.
4231	ERROR: tpcall() returned no class attribute entry for section fieldid
	Description	While retrieving MIB attribute information, a failure occurred, so the tmconfig operation will fail.
	Action	Check the log for related messages.
4232	ERROR: Memory allocation failure
	Description	While the sbbl process was attempting to shut down a process, the system ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4233	ERROR: Memory allocation failure
	Description	While the sbbl process was attempting to shut down a process, the system ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4234	ERROR: Failed to get information on the Deactivated Object
	Description	A failure occurred while the MIB was attempting to retrieve information about an object that was going to be deactivated.
	Action	Contact your BEA TUXEDO system Technical Support.
4235	ERROR: Memory allocation failure
	Description	While the sbbl process was attempting to start a process, the system ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4236	ERROR: Failed to get information on the Activated Object
	Description	A failure occurred while the MIB was attempting to retrieve information about an object that was going to be activated.
	Action	Contact your BEA TUXEDO system Technical Support.
4237	ERROR: Memory allocation error for TAGENT on site
	Description	While attempting to generate an encryption packet for the TAGENT on the given site, a memory allocation error occurred.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4238	ERROR: No encryption package installed. num bits minimum encryption is configured
	Description	A process attempted to contact the tlisten. However, the MINENCRYPTBITS field in the NETWORK section for this process was set to a value greater than 0. No encryption package is installed.
	Action	Buy and install the Link Level Encryption package or reconfigure the system such that MINENCRYPTBITS is 0.
4239	ERROR: 40-bit package installed. num bits minimum encryption is configured
	Description	A process attempted to contact the tlisten. However, the MINENCRYPTBITS field in the NETWORK section for this process was set to a value greater than 40. Only the 40-bit Link Level Encryption package is installed.
	Action	Buy and install the 128-bit Link Level Encryption package or reconfigure the system such that MINENCRYPTBITS is less than or equal to 40.
4241	ERROR: Error receiving Diffie-Hellman reply from TAGENT on site
	Description	The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4242	WARN: Encryption negotiation failure with TAGENT on site
	Description	The process attempting to connect to the TAGENT could not successfully negotiate an encryption strength.
	Action	There are many ways to fix this problem. One is to change the encryption parameters in the NETWORK section for the connecting machine to be compatible with the options with which the remote tlisten was started. The second is to kill the remote tlisten, and restart it using different parameters for the -z and -Z options. If you do not specify any -z or -Z options to the tlisten process, then by default it will speak any encryption protocol allowed in the currently installed package. To find out which package is installed on any site, run the command tmadmin -v. If your application is connecting to an older site, then you must configure the system such that it can speak 0 bits of encryption to the older site.
4243	ERROR: Error establishing Diffie-Hellman key
	Description	The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4244	WARN: Encryption negotiation failure with TAGENT on site
	Description	The process attempting to connect to the TAGENT could not successfully negotiate an encryption strength.
	Action	There are many ways to fix this problem. One is to change the encryption parameters in the NETWORK section for the connecting machine to be compatible with the options with which the remote tlisten was started. The second is to kill the remote tlisten, and restart it using different parameters for the -z and -Z options. If you do not specify any -z or -Z options to the tlisten process, then by default it will speak any encryption protocol allowed in the currently installed package. To find out which package is installed on any site, run the command tmadmin -v. If your application is connecting to an older site, then you must configure the system such that it can speak 0 bits of encryption to the older site.
4246	ERROR: MINENCRYPTBITS parameter must be 0, 40 or 128
	Description	The MINENCRYPTBITS field in the NETWORK section of the UBBCONFIG file must be set to 0, 40 or 128.
	Action	MINENCRYPTBITS is the minimum allowable level of encryption which may be used by the BRIDGE on this network address. Change the MINENCRYPTBITS field in the UBBCONFIG file to 0, 40 or 128. The encryption level which gets negotiated at run-time can be determined from the TA_CURENCRYPTBITS field in the BRIDGE class.
4248	ERROR: MAXENCRYPTBITS parameter must be 0, 40 or 128
	Description	The MAXENCRYPTBITS field in the NETWORK section of the UBBCONFIG file must be set to 0, 40 or 128.
	Action	MAXENCRYPTBITS is the preferred level of encryption which may be used by the BRIDGE on this network address. Change the MAXENCRYPTBITS field in the UBBCONFIG file to 0, 40 or 128. The encryption level which gets negotiated at run-time can be determined from the TA_CURENCRYPTBITS field in the BRIDGE class.
4249	ERROR: Could not get encryption handle
	Description	The system ran out of memory in the tlisten process while attempting to allocate an encryption handle.
	Action	Check the memory on the system where the command was run. If it seems that there should be enough memory for this operation, contact your BEA TUXEDO system Technical Support.
4250	ERROR: -z(sub) must be 0, 40 or 128
	Description	The -z option of the tlisten must be set to 0, 40 or 128.
	Action	The -z option is the minimum allowable level of encryption which may be used by this tlisten. Change the -z option to 0, 40 or 128.
4251	ERROR: -Z(sub) must be 0, 40 or 128
	Description	The -Z option of the tlisten must be set to 0, 40 or 128.
	Action	The -Z option is the preferred level of encryption which may be used by this tlisten. Change the -Z option to 0, 40 or 128.
4252	ERROR: -z (sub) is larger than 0, but the link level package is not installed
	Description	The -z option was larger than zero. However, the link level encryption package was not installed.
	Action	Buy the link level encryption package. Set the -z option to 0. If you believe that you have installed the link level encryption package, contact your BEA TUXEDO system Technical Support.
4253	ERROR: -z (sub) is larger than 40, but only the 40-bit package is installed
	Description	The -z option was larger than forty. The 40-bit package is installed.
	Action	Buy the 128-bit link level encryption package. Set the -z option to 0 or 40. If you believe that you have installed the 128-bit link level encryption package, contact your BEA TUXEDO system Technical Support.
4254	ERROR: Older client attempted to connect to secure tlisten
	Description	A site older than the current release attempted to contact a tlisten whose -z option was set greater than 0.
	Action	When older sites are part of a BEA TUXEDO configuration, the -z option of the tlisten may have to be zero in order for proper communication between the older site and the newer site. By restarting the tlisten process with a -z option of zero (or no -z option, since by default the minimum encryption parameter is zero), then older sites may successfully connect to this tlisten process.
4255	ERROR: Could not generate first encryption packet
	Description	The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO Technical Support.
4256	ERROR: Could not send first encryption packet
	Description	An error occurred in the network when attempting to send an encryption packet.
	Action	Check the network on the system where the tlisten is running. If it seems that the network is working properly, contact your BEA TUXEDO Technical Support.
4257	ERROR: Encryption negotiation failure
	Description	The process attempting to connect to the tlisten could not successfully negotiate an encryption strength.
	Action	There are many ways to fix this problem. One is to change the encryption parameters in the NETWORK section for the connecting machine to be compatible with the options with which the remote tlisten was started. The second is to kill the remote tlisten, and restart it using different parameters for the -z and -Z options. If you do not specify any -z or -Z options to the tlisten process, then by default it will speak any encryption protocol allowed in the currently installed package. To find out which package is installed on any site, run the command tmadmin -v. If your application is connecting to an older site, then you must configure the system such that it can speak 0 bits of encryption to the older site.
4258	ERROR: fatal error while negotiating encryption parameters
	Description	The link level encryption packet which contained the Diffie-Hellman key exchange information was corrupted. The network may be compromised.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4259	ERROR: Minimum encryption (num) is larger than 0, but the link level package is not installed
	Description	The BRIDGE or BSBRIDGE could not boot because it was not configured correctly. The MINENCRYPTBITS field in the NETWORK section was set to a value greater than 0. No encryption package is installed.
	Action	Buy and install the Link Level Encryption package or reconfigure the system such that MINENCRYPTBITS is 0.
4260	ERROR: Minimum encryption (num) is larger than 40, but only the 40-bit package is installed
	Description	The BRIDGE or BSBRIDGE could not boot because it was not configured correctly. The MINENCRYPTBITS field in the NETWORK section was set to a value greater than 40. Only the 40-bit Link Level Encryption package is installed.
	Action	Buy and install the 128-bit Link Level Encryption package or reconfigure the system such that MINENCRYPTBITS is less than or equal to 40.
4261	ERROR: Memory allocation failure
	Description	The system ran out of memory
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4262	ERROR: Could not create first Diffie-Hellman packet
	Description	While generating the first link level encryption negotiation package for BRIDGE communication, an error occurred.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4263	ERROR: Error sending encryption negotiation packet
	Description	While sending the first link level encryption negotiation package for BRIDGE communication, an error occurred.
	Action	Check the network on the machine with the affected BRIDGE or BSBRIDGE.
4265	ERROR: Memory allocation failure
	Description	The system ran out of memory in the BRIDGE or BSBRIDGE
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4266	ERROR: Could not create second Diffie-Hellman packet
	Description	While generating the second link level encryption negotiation package for BRIDGE communication, an error occurred.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4267	ERROR: Error sending encryption negotiation packet
	Description	While sending the second link level encryption negotiation package for BRIDGE communication, an error occurred.
	Action	Check the network on the machine with the affected BRIDGE or BSBRIDGE.
4268	ERROR: Encryption negotiation failed with bridge on site
	Description	The BRIDGE or BSBRIDGE attempting to connect to the BRIDGE or BSBRIDGE on the given remote site could not successfully negotiate an encryption strength.
	Action	Change the encryption parameters in the NETWORK section for the two machines connecting to each other to be compatible.
4269	ERROR: System error during negotiation with bridge on site
	Description	A system error occurred during link level encryption negotiation.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4271	ERROR: System error during negotiation with bridge on site
	Description	A system error occurred during link level encryption negotiation.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4272	ERROR: Could not agree on encryption strength
	Description	A system error occurred during link level encryption negotiation.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4274	ERROR: Could not send saved messages to site
	Description	While the BRIDGE or BSBRIDGE is negotiating the link level encryption parameters, messages to the remote BRIDGE are saved. An error occurred while sending these saved messages to the remote BRIDGE after the negotiation was complete.
	Action	Check the network on the machine with the affected BRIDGE or BSBRIDGE.
4275	ERROR: Cannot start servers, error reading *SERVERS section
	Description	During the tmboot process, the SERVERS section of the configuration file could not be read.
	Action	Verify that the environment variable TUXCONFIG is set correctly and exported. Make sure the TUXCONFIG file is not corrupted (try a tmunloadcf). Verify that the TUXCONFIG file was propagated to all machines in the configuration.
	See Also	tmboot (1), tmunloadcf (1)
4276	ERROR: Can't shutdown servers, error reading *SERVERS section
	Description	During the tmshutdown process, the SERVERS section of the configuration file could not be read.
	Action	Verify that the environment variable TUXCONFIG is set correctly and exported, or that TUXCONFIG is not corrupted (try a tmunloadcf)
4277	ERROR: Remote BBL boot failed. Try running pclean before booting
	Description	A remote machine has been marked as partitioned, but has not been cleaned from the bulletin board using the tmadmin pclean command (or the equivalent MIB operation).
	Action	First pclean the remote machine by using tmadmin (or the GUI, or the MIB). Once the pclean has completed successfully, try to boot the remote BBL again. If the remote boot fails again, contact your BEA TUXEDO system Technical Support.
4279	ERROR: Error detected during mutual authentication
	Description	The tlisten could not access the authentication files.
	Action	Make sure that the administrator has read privileges on the $TUXDIR/udataobj/tlisten.pw file or the $APPDIR/.adm/tlisten.pw file. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4280	ERROR: Error detected during mutual authentication with val
	Description	The remote tlisten could not access the authentication files.
	Action	Make sure that the administrator has read privileges on the $TUXDIR/udataobj/tlisten.pw file or the $APPDIR/.adm/tlisten.pw file on the remote site. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4281	ERROR: Cannot read password file "file" (errno=val)
	Description	While authenticating with the tlisten process, an error occurred while reading the password file
	Action	The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Make sure that this file is not corrupted or missing. If everything in the file appears normal, contact your BEA TUXEDO system Technical Support.
4282	ERROR: Failed to change working directory to "dir" (errno=val)
	Description	The tlisten process may attempt to change directories to $APPDIR during authentication. If the process cannot change directories, this error may occur.
	Action	Make sure that the APPDIR of the current application is not corrupted or missing. If everything in the directory appears normal, contact your BEA TUXEDO system Technical Support.
4283	ERROR: Failed to determine file length for "dir" (errno=val)
	Description	While authenticating with the tlisten process, an error occurred while reading the password file.
	Action	The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Make sure that this file is not corrupted or missing. If everything in the file appears normal, contact your BEA TUXEDO system Technical Support.
4284	ERROR: Authentication requested, but no password file exists
	Description	While authenticating with the tlisten process, an error occurred while reading the password file.
	Action	The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Make sure that this file is not corrupted or missing. If everything in the file appears normal, contact your BEA TUXEDO system Technical Support.
4285	WARN: T L I S T E N A U T H E N T I C A T I O N I S D I S A B L E D !
	Description	tlisten authentication has been turned off. No site will be authenticated. Be warned that the tlisten may be the site of a security breach.
	Action	The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. The password file is a plain-text file where each line (up to 20) contains a password. The password file on the remote site must contain at least one password which is the same as a password on the local site. If you create this file, and restart the tlisten or other process which may have to speak to the tlisten, then this warning will not be displayed. If this warning is not displayed, then the network session with the remote site will be authenticated.
4286	ERROR: Password file "file" exists, encryption is not available
	Description	In order to properly authenticate the tlisten session, an encryption package must be installed.
	Action	Contact your BEA TUXEDO system Technical Support.
4287	ERROR: Failed to open password file "file" (errno=val)
	Description	The system found the tlisten authentication password file, but could not open it.
	Action	If the host operating system has a limit on the number of open files, or the number of open files per user or the number of open files per process, then you may need to increase that limit. If it seems that there should be enough file descriptors for this operation, contact your BEA TUXEDO system Technical Support.
4288	WARN: More than val passwords found in file
	Description	The tlisten authentication file will only accept the first twenty passwords. All subsequent passwords will be ignored.
	Action	Limit the number of passwords in the tlisten password authentication file to twenty.
4289	WARN: Password #val is greater than val chars
	Description	Passwords found in the tlisten authentication file can only be the specified number of characters long. All characters after the maximum number of characters will be ignored.
	Action	Limit the number of characters for each password in the tlisten password authentication file to the specified amount.
4290	ERROR: No passwords in password file
	Description	There must be at least one password in the password authentication file in order for tlisten authentication to work properly.
	Action	The password file is $TUXDIR/udataobj/tlisten.pw or $APPDIR/.adm/tlisten.pw. Add a password to the password file. One suggestion for a password is abracadabra.
4291	ERROR: S E C U R I T Y V I O L A T I O N ! Remote site may be compromised.
	Description	The remote site did not have a matching password in its password file.
	Action	Make sure that there is a password on the local site which matches one of the passwords on the remote site. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4292	ERROR: Transport failure during authentication
	Description	The network returned an error during authentication with the tlisten.
	Action	Check the network on the system where the command was run. If the network is OK, contact your BEA TUXEDO system Technical Support.
4293	ERROR: Failed to authenticate with remote process (tperrno=val)
	Description	Authentication with the remote tlisten failed.
	Action	Make sure that there is a password on the local site that matches one of the passwords on the remote site. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4294	ERROR: Invalid protocol message received during authentication
	Description	Authentication with the remote tlisten failed.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4295	ERROR: Invalid protocol message received during authentication
	Description	Authentication with the remote tlisten failed.
	Action	Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.

---

---