[Top] [Prev] [Next] [Bottom]

26. CMDTUX Messages 4400-4499

4400	*INFO: Waiting up to seconds* seconds for port to clear**
	Description	On some platforms the a TCP port may be help for up to four minutes by the operating system after use. The `BRIDGE` process will try to establish a port for ninety seconds before giving up completely. This message will print out every fifteen seconds with the amount of time which the `BRIDGE` process will wait for a hung port.
Action	Ensure that the TCP port number being used by the `BRIDGE` is not in use by some other process. On some operating systems, the netstat command can be used to determine the state of TCP ports.
4401	ERROR: Could not establish network descriptor for address
	Description	The `BRIDGE` could not allocate memory for a network descriptor.
Action	The `BRIDGE` ran out of memory when attempting to contact address. Make sure enough memory exists on the system running the `BRIDGE`. If it appears that there should be enough memory to run the `BRIDGE`, and this error happens consistently, contact the BEA TUXEDO system Technical Support.
4402	ERROR: Could not change state of network descriptor for address
	Description	An operating system error occurred while attempting to change the state of the network descriptor from non-blocking to blocking.
Action	If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4403	ERROR: Could not change state of network descriptor for address
	Description	An operating system error occurred while attempting to change the state of the network descriptor from blocking to non-blocking.
Action	If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4404	WARN: Could not reroute encrypted messages
	Description	Link level encryption was used on a network link which has gone bad. Since the message to be sent was encrypted, it cannot be recovered and sent to an alternate address.
Action	No action necessary.
4405	ERROR: NETGRPNO value value must be >= 0 and < highval
	Description	While compiling the `UBBCONFIG` file an error occurred. `NETGRPNO` numbers must be between 0 and highval.
Action	Change the `NETGRPNO` value to be within the required range.
4406	ERROR: Memory allocation error
	Description	An attempt dynamically to allocate memory from the operating system using calloc failed while trying to allocate space for an network descriptor in the `BRIDGE`.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4407	ERROR: Invalid state change
	Description	The administrator attempted to change the state of the `BRIDGE` from `ACTIVE` to `PENDING` or from `PENDING` to `ACTIVE`.
Action	These MIB state changes should not be attempted.
4408	ERROR: Shutting down bridge, serious polling error
	Description	An operating system error occurred while attempting to poll the network descriptors.
Action	If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4409	ERROR: Received message with unknown release number value
	Description	The bridge received a packet with an unknown release number value. The network may be having difficulty. If link level encryption is in use, this error may be an indication that an attack is in progress.
Action	If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4410	ERROR: Error decoding BRIDGE RPC msg
	Description	The `BRIDGE` has messages which are used to synchronize communications. One of these messages has been received from another `BRIDGE`, but the format is unknown.
Action	If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4412	ERROR: MAXPENDINGBYTES parameter must be >= 100000
	Description	While compiling the `UBBCONFIG` file an error occurred. `MAXPENDINGBYTES` must be greater than or equal to 100000.
Action	Change the `MAXPENDINGBYTES` value to be greater than or equal to 100000.
4413	*ERROR: Duplicate NETGROUPS section**
	Description	While compiling the `UBBCONFIG` file an error occurred. There may only be one `NETGROUPS` section in the `UBBCONFIG` file.
Action	Remove duplicate `NETGROUPS` sections from the `UBBCONFIG` file.
4415	*ERROR: Identifier for network group name must be <= value* characters in length**
	Description	While compiling the `UBBCONFIG` file an error occurred. A network group name must be less than or equal to value characters.
Action	Shorten the name of the network group in the `NETGROUPS` section.
4417	*ERROR: Network group name name* must not contain , comma, or colon*
	Description	While compiling the `UBBCONFIG` file an error occurred. The network group name name may not contain certain characters.
Action	Remove the undesirable characters from name.
4419	ERROR: Duplicate NETGROUPS entry entry*
	Description	While compiling the `UBBCONFIG` file an error occurred. A duplicate network group entry was found.
Action	Network group names must be unique. Choose another name for this network group.
4420	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed during `tmloadcf` while trying to allocate space for the network group table.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4421	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `realloc` failed during `tmloadcf` while trying to allocate space for the network group table.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4422	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed during `tmloadcf` while trying to allocate space for the network group name.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4423	*ERROR: More than MAXNETGROUPS(value) in configuration file*
	Description	While compiling the `UBBCONFIG` file an error occurred. The maximum number of network groups allowed in a configuration is controlled by the `RESOURCES` parameter `MAXNETGROUPS`. The number of netgroups found in the `UBBCONFIG` file is greater than the maximum number of netgroups.
Action	Either remove network groups or increase the value of `MAXNETGROUPS`.
4424	*ERROR: Must have NETGRPNO on NETGROUPS entry entry**
	Description	While compiling the `UBBCONFIG` file an error occurred. `NETGRPNO` is a required parameter for each entry in the `NETGROUPS` section. entry did not supply the required parameter.
Action	Supply a network group number for the entry network group. Network group numbers must be unique, and should remain consistent for the life of the network group. The network group number is used to coordinate failover and failback of the network.
4425	ERROR: NETGROUPS entry entry* has a duplicate NETGRPNO parameter of value
	Description	While compiling the `UBBCONFIG` file an error occurred. `NETGRPNO` is a required parameter for each entry in the `NETGROUPS` section, and must be unique. entry did not supply a unique `NETGRPNO` parameter.
Action	Supply a network group number for the entry network group. Network group numbers must be unique, and should remain consistent for the life of the network group. value is not unique. The network group number is used to coordinate failover and failback of the network.
4427	*ERROR: NETGRPNO for the entry* network group may not be 0**
	Description	While compiling the `UBBCONFIG` file an error occurred. `NETGRPNO` is a required parameter for each entry in the `NETGROUPS` section, and must be unique. There is always at least one network group named `DEFAULTNET` which has a `NETGRPNO` of zero. Hence, network group entry may not have a `NETGRPNO` of zero.
Action	Supply a network group number for the entry network group. Network group numbers must be unique, and should remain consistent for the life of the network group. value is not unique, since the network group `DEFAULTNET` has a `NETGRPNO` of zero. The network group number is used to coordinate failover and failback of the network.
4429	ERROR: MAXNETGROUPS parameter must be >= lowval and < highval
	Description	While compiling the `UBBCONFIG` file an error occurred. The `MAXNETGROUPS` parameter must be between lowval and highval.
Action	Change the `MAXNETGROUPS` value to be within the required range.
4430	ERROR: RESOURCES section must appear before NETGROUPS section
	Description	While compiling the `UBBCONFIG` file an error occurred. The `NETGROUPS` section must appear before the `RESOURCES` section.
Action	Place the `NETGROUPS` section after the `RESOURCES` section.
4432	ERROR: NETPRIO must be > 0 and <= value
	Description	While compiling the `UBBCONFIG` file an error occurred. The network priority of a network group must be greater than zero and less than or equal to value.
Action	Change the `NETPRIO` parameter to be within the required range.
4433	ERROR: NETGROUPS section must appear before NETWORK section
	Description	While compiling the `UBBCONFIG` file an error occurred. The `NETGROUPS` section must appear before the `NETWORK` section.
Action	Place the `NETWORK` section after the `NETGROUPS` section.
4434	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `calloc` failed during `tmloadcf` while trying to allocate space for the network map table.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4435	ERROR: Could not find machine section
	Description	The `BRIDGE` could not find the `MACHINES` section of the `TUXCONFIG` file.
Action	The `TUXCONFIG` file may be corrupt. If this machine is the master node, try removing the `TUXCONFIG` file and regenerating it from the `UBBCONFIG` using `tmloadcf`. If this machine is a remote node, make sure that all IPC resources have been removed from the machine. Then remove the `TUXCONFIG` file, and attempt to `tmboot` the machine from the `MASTER` machine. If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4436	*ERROR: Could not find LMID name* in machine section**
	Description	The `BRIDGE` could not find the `LMID` name in the `TUXCONFIG` file. The `BRIDGE` is searching for its own entry in the `TUXCONFIG` file.
Action	The `TUXCONFIG` file may be corrupt. If this machine is the master node, try removing the `TUXCONFIG` file and regenerating it from the `UBBCONFIG` using `tmloadcf`. If this machine is a remote node, make sure that all IPC resources have been removed from the machine. Then remove the `TUXCONFIG` file, and attempt to tmboot the machine from the `MASTER` machine. If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4437	ERROR: Memory allocation error
	Description	An attempt to dynamically allocate memory from the operating system using `malloc` failed while trying to allocate space for communication with the `tlisten`.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. There may be a security attack in progress.
4438	*WARN: Minimum encryption (min) is larger than 0, but the link level package is not installed*
	Description	An attempt was made to use link level encryption of min bits on a network link. However, the link level encryption package has not been installed on this machine.
Action	Install the link level encryption package on this machine, or change the `MINENCRYPTBITS` value of min for this network entry to zero.
4439	*ERROR: LMID name* must match LMID from the `MACHINES` section**
	Description	While compiling the `UBBCONFIG` file an error occurred. In the `NETWORK` section, each entry must match a corresponding entry in the `MACHINES` section. name does not match any entry in the `MACHINES` section.
Action	Either remove the `NETWORK` section entry or add a `MACHINES` section entry corresponding to the given `LMID`.
4440	*ERROR: NETGROUP name* must match NETGROUP from the NETGROUPS section*
	Description	While compiling the `UBBCONFIG` file an error occurred. The `NETGROUPS` parameter of a `NETWORK` section entry must match a netgroup previously defined in the `NETGROUPS` section. name does not match any entry in the `NETGROUPS` section.
Action	Either remove the `NETWORK` section entry or add a `NETGROUPS` section entry corresponding to the given `NETGROUP` parameter.
4441	*WARN: Minimum encryption (min) is larger than 40, but only the 40-bit package is installed*
	Description	An attempt was made to use link level encryption of min bits on a network link. However, the installed link level encryption package is forty bit.
Action	Install the one hundred twenty eight link level encryption package on this machine, or change the `MINENCRYPTBITS` value of min for this network entry to zero or fourth.
4442	ERROR: Invalid group information/self NADDR missing, NETGRPNO netgrpno
	Description	The `BRIDGE` was attempting to discover network parameters pertaining to its own set of netgroups. However, it could not find any network groups for which it is a member.
Action	Ensure that every machine in a network application is a member of a network group. All machines should be members of the `DEFAULTNET` group, and may also be members of any other network group.
4443	ERROR: TA_NETGROUP cannot be used on a SET operation
	Description	The `TA_NETGROUP` field may not be set during a `SET` operation of the `T_BRIDGE` class.
Action	Remove the `TA_NETGROUP` field from all `SET` operations involving the `T_BRIDGE` class.
4450	*ERROR: NETGRPNO for the netgroup* network group must be 0**
	Description	While compiling the `UBBCONFIG` file an error occurred. The value of `NETGRPNO` for the netgroup network group must be zero.
Action	netgroup is a special network group which must have a `NETGRPNO` value of zero. Change `NETGRPNO` for this network group to zero.
4452	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `realloc` failed during `tmloadcf` while trying to allocate space for the network map table.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4453	ERROR: The combination of NETGROUP netgroup and LMID lmid must be unique
	Description	While compiling the `UBBCONFIG` file an error occurred. No two entries in the `NETWORK` section may have the same `LMID` and `NETGROUP` attributes.
Action	Ensure that all entries in the `NETWORK` section have a unique combination of `LMID` and `NETGROUP` values. In particular, more than one lmid entry has a `NETGROUP` parameter of netgroup.
4455	*ERROR: NETGROUP parameter must be <= value* characters**
	Description	While compiling the `UBBCONFIG` file an error occurred. A network group name must be less than or equal to value characters.
Action	Shorten the name of the `NETGROUP` field in the `NETWORK` section.
4460	ERROR: BRIDGE Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed while trying to allocate space for an internal circuit table in the `BRIDGE`.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The use of `MAXPENDINGBYTES` in the machines section may alleviate the `BRIDGE` memory allocation problem.
4461	ERROR: Could not find BRIDGE NADDR address for lmid
	Description	While attempting to connect to the `LMID` lmid, the `BRIDGE` process could not find an address to connect to in the `TUXCONFIG` file.
Action	Ensure that an entry exists for lmid in the `UBBCONFIG` `NETWORK` section. If an entry exists, contact your BEA TUXEDO system Technical Support.
4462	ERROR: Could not find BRIDGE NADDR address for lmid
	Description	While attempting to connect to the `LMID` lmid, the `BRIDGE` process could not find an address to connect to in the `TUXCONFIG` file.
Action	Ensure that an entry exists for lmid in the `UBBCONFIG` `NETWORK` section. If an entry exists, contact your BEA TUXEDO system Technical Support.
4464	ERROR: Could not initialize global network information
	Description	An operating system error occurred while attempting to initialize network information. The `tlisten` will not boot.
Action	Ensure the viability of the network. If the network appears to be viable, contact your BEA TUXEDO system Technical Support.
4465	ERROR: BRIDGE Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed while trying to allocate space for an internal circuit table in the `BRIDGE`.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The use of `MAXPENDINGBYTES` in the machines section may alleviate the `BRIDGE` memory allocation problem.
4466	ERROR: BRIDGE Memory allocation error while connecting lmid
	Description	An attempt dynamically to allocate memory from the operating system using malloc failed while the `BRIDGE` was connecting to lmid.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. The use of `MAXPENDINGBYTES` in the machines section may alleviate the `BRIDGE` memory allocation problem.
4467	ERROR: BRIDGE system error at id
	Description	An internal error was captured by the `BRIDGE`.
Action	Contact your BEA TUXEDO system Technical Support.
4468	ERROR: Could not initialize protocol specific network information
	Description	An operating system error occurred while attempting to initialize network information. `tlisten` will not boot.
Action	Ensure the viability of the network. If the network appears to be viable, contact your BEA TUXEDO system Technical Support.
4469	ERROR: Could not initialize protocol specific network information
	Description	An operating system error occurred while attempting to initialize network information. `tlisten` will not boot.
Action	Ensure the viability of the network. If the network appears to be viable, contact your BEA TUXEDO system Technical Support.
4471	ERROR: Received message with unknown release number value
	Description	The tlisten received a packet with an unknown release number value. The network may be having difficulty. If link level encryption is in use, this error may be an indication that an attack is in progress.
Action	If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4472	ERROR: Could not allocate network resource
	Description	A network descriptor could not be allocated for the listening endpoint in `tlisten`.
Action	Ensure the network on the system is viable. If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4473	ERROR: Unable to decrypt message
	Description	A process speaking to a tlisten process could not decrypt one of the messages coming from the tlisten. This error may indicate that an attack is in progress.
Action	Ensure the network on the system is viable. If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4474	ERROR: Error encrypting buffer for TAGENT on lmid
	Description	A process speaking to a `tlisten` process could not encrypt a message for the `tlisten` on lmid. This error may indicate that an attack is in progress.
Action	Ensure the network on the system is viable. If this error happens consistently, contact the BEA TUXEDO system Technical Support.
4475	*INFO: SRVID = id SRVGRP = grp* SIGTERM send failed (tperrno = tperrno)**
	Description	tmshutdown was unable to send a `SIGTERM` to a server of the given id and grp. The value of tperrno may provide further information on the source of the failure.
Action	No action necessary.
4476	*INFO: SRVID = id SRVGRP = grp* SIGKILL send failed (tperrno = tperrno)**
	Description	`tmshutdown` was unable to send a `SIGKILL` to a server of the given id and grp. The value of tperrno may provide further information on the source of the failure.
Action	No action necessary.
4477	*INFO: SRVID = id SRVGRP = grp* SIGTERM send failed (tperrno = tperrno)**
	Description	`tmshutdown` was unable to send a SIGTERM to a server of the given id and grp. The value of tperrno may provide further information on the source of the failure.
Action	No action necessary.
4478	*INFO: SRVID = id SRVGRP = grp* SIGKILL send failed (tperrno = tperrno)**
	Description	`tmshutdown` was unable to send a `SIGKILL` to a server of the given id and grp. The value of tperrno may provide further information on the source of the failure.
Action	No action necessary.
4479	ERROR: Could not get encryption handle
	Description	`tlisten` could not get a resource necessary to perform link level encryption.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4480	ERROR: NETGROUP id negotiation failed with bridge on lmid
	Description	The `NETGRPNO` of a the remote lmid machine does not match the value given in the local version of the `TUXCONFIG` file. This error may indicate that a security attack was in progress.
Action	Ensure the network is viable and that there were no security attacks in progress. It may be necessary to bring the affected machine down, remove its `TUXCONFIG` file and `tmboot` the machine.
4482	*ERROR: .SysServiceTimeout: queue, group group, id srvid* server killed due to a service time-out**
	Description	The `BBL` has killed a server due to a service time-out. The server is described by its queue, group and srvid.
Action	The administrator may need to configure the service time-out higher in order to accommodate a heavily loaded system.
4483	*INFO: .SysMachineState: mid* state change to ACTIVE**
	Description	The given mid has become unpartitioned.
Action	No action necessary.
4484	*INFO: .SysMachineUnpartitioned: mid* is unpartitioned**
	Description	The given mid has become unpartitioned.
Action	No action necessary.
4485	*INFO: .SysMachineState: mid* state change to ACTIVE**
	Description	The given mid has become unpartitioned.
Action	No action necessary.
4486	ERROR: Could not send saved messages
	Description	The `BRIDGE` process saves messages while an asynchronous connect is outstanding. However, once the connection was established, there was an error sending the messages saved for the remote machine.
Action	Ensure that the network connection is viable. If the network is flaky, it is possible that the connection establishment packet was received, but that subsequent packets were lost by the network. If the network appear to be viable, contact your BEA TUXEDO system Technical Support.
4487	ERROR: BRIDGE did not generate a unique circuit ID
	Description	The `BRIDGE` tried to generate a unique circuit identifier and the algorithm failed to do so.
Action	Contact your BEA TUXEDO system Technical Support.
4488	INFO: Connecting to pmid at address
	Description	This is an information message that indicates that a connection is being made to a machine at the specified address.
Action	No action required.
4489	ERROR: BRIDGE Memory allocation error
	Description	The `BRIDGE` failed to allocate memory.
Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4490	ERROR: Connection failure to machine at address
	Description	The `BRIDGE` process could not connect to machine.
Action	Check that machine is up. Check network connectivity between the machines. Check that the BEA TUXEDO system is running on machine The `BRIDGE` processes will automatically reestablish a connection between the machines on demand, when possible. To prevent thrashing, the link will be suspended for five minutes if an automatic reconnect attempt fails. No further automatic reconnection attempts are made during this interval. If desired us `tmadmin`(1)'s `reconnect` command to initiate a reconnection attempt manually. Manual attempts are allowed during the five-minute suspension interval.
4491	ERROR: Could not send saved messages to site
	Description	While the `BRIDGE` or `BSBRIDGE` is negotiating the link level encryption parameters, messages to the remote `BRIDGE` are saved. An error occurred while sending these saved messages to the remote BRIDGE after the negotiation was complete.
Action	Check the network on the machine with the affected `BRIDGE` or `BSBRIDGE`.
4492	INFO: Resuming BRIDGE failover/failback messages
	Description	There had been too many `BRIDGE` reconnection attempt LOG messages sent. Enough time has passed, so messages should be logged once more.
Action	This is an informational message, no action is required. If the connection is not established, notify the network administrator of the network outage.
4493	INFO: Temporarily suppressing BRIDGE failover/failback messages
	Description	The `BRIDGE` has been sending many messages to the log file while trying to re-establish communications on various network addresses. The loop is sending too many messages to the LOG, so though the actions are continuing, they are not being logged.
Action	The `BRIDGE` is silently trying to reconnect, the actions are not being logged. The network administrator should work to restore network connectivity since there is an outage. Once sufficient time has passed, more of these messages may be logged if the network connections still fail.

[Top] [Prev] [Next] [Bottom]