[Top] [Prev] [Next] [Bottom]

8. LIBTUX Messages 1100-1199

1100	ERROR: Cannot send a message to a site with an unknown release, release
	Description	The BEA TUXEDO system is trying to convert a message to the message format of an unknown release: release. Interoperability allows a single application to have multiple (two) releases of the BEA TUXEDO system exist on different nodes and interoperate with one another. The conversion is done by either the sender, if it has the latest software, or the receiver.
Action	Contact your BEA TUXEDO system Technical Support.
See Also	BEA TUXEDO Administrator's Guide
1104	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc()` failed while converting Bulletin Board data to the BEA TUXEDO system Release 4.1 format.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1107	ERROR: Invalid data length of 0, data not self describing
	Description	The calling process failed in `tpbroadcast`(3c). `tpbroadcast`(3c) was most likely invoked with data that is not self-describing and with the length argument set to 0. Not self-describing data is defined as a buffer type that requires a length to be specified when sent, for example, CARRAY and X_OCTET.
Action	Make sure that the length argument to the `tpbroadcast`(3c) call is not set to 0 if the buffer type of the unsolicited message being sent is not self-describing.
See Also	`tpbroadcast`(3c)
1108	*ERROR: BBL not available on requested lmid (site)*
	Description	The calling process failed in `tpbroadcast`(3c) while trying to get the server table entry of the BBL on LMID site from the Bulletin Board. This is most likely due to the fact that the BBL on LMID site is not running.
Action	Boot the BBL on LMID site.
See Also	`tpbroadcast`(3c)
1109	*ERROR: Could not retrieve BBL from specified lmid (site)*
	Description	The calling process failed in `tpbroadcast`(3c) while trying to get the server table entry of the BBL on LMID site from the Bulletin Board.
Action	Consult your BEA TUXEDO system Technical Support.
See Also	`tpbroadcast`(3c)
1114	ERROR: Unsolicited signal handler unable to get BB parameters
	Description	The calling process failed to get from the Bulletin Board the signal to be used for signal-based notification. This error may have occurred while the client was attempting to join the application, using `tpinit`(3c), or while making an ATMI call prior to joining the application, or if the system the client is running on does not support reliable signals.
Action	Parse through the user log to see if there are other messages related to this failure. If so, refer to the appropriate system messages. Otherwise, consult your BEA TUXEDO system Technical Support.
See Also	`tpinit`(3c), `ubbconfig`(5)
1115	ERROR: Invalid USIGNAL parameter in BB
	Description	The calling process retrieved an invalid signal number from the Bulletin Board. This signal was to be used for signal-based notification.
Action	Parse through the userlog to see if there are other messages related to this failure. If so, refer to the appropriate system messages. Otherwise, consult your BEA TUXEDO system Technical Support.
1117	ERROR: Unable to check for unsolicited messages, tperrno = tperrno
	Description	The calling process failed while checking for an unsolicited message upon receipt of a signal indicating that an unsolicited message had arrived. tperrno is set to the TUXEDO System/T error code that was returned by the system after trying to get the unsolicited message.
Action	tperrno is most likely set to TPESYSTEM or TPEOS. In this case, parse through the userlog to find the exact nature of the failure as described in another message.
See Also	`tpchkunsol`(3c)
1118	ERROR: Unable to check for unsolicited messages, tperrno = tperrno
	Description	The calling process failed while checking for unsolicited messages. tperrno is set to the BEA TUXEDO system error code that was returned by the system after failing to check for unsolicited messages.
Action	tperrno is most likely set to TPESYSTEM or TPEOS. In this case, parse through the userlog to find the exact nature of the failure as described in another message.
See Also	`tpchkunsol`(3c)
1119	ERROR: tpsetunsol() not called, dropping unsolicited message
	Description	The calling process failed to set the method of handling unsolicited messages prior to receiving its first unsolicited message. The unsolicited message will therefore be dropped since the system does not know what to do with it.
Action	Make sure the calling process calls `tpsetunsol`(3c) as soon as it joins the application.
See Also	`tpchkunsol`(3c), `tpsetunsol`(3c)
1122	ERROR: No space in Bulletin Board
	Description	The calling process failed to join the application due to the lack of space in the registry table portion of the Bulletin Board.
Action	If the calling process is an application client, the administrator will need to increase MAXACCESSERS in the RESOURCES section of the configuration file. If the calling process is a server, the administrator will need to increase MAXACCESSERS and/or MAXSERVERS in the RESOURCES section of the configuration file. Note that MAXACCESSERS specifies the maximum number of processes that can have access to a Bulletin Board on a particular machine at any one time. MAXSERVERS specifies the maximum number of servers to be accommodated by the entire application at any one time.
See Also	`ubbconfig`(5)
1187	ERROR: Invalid parameter passed to internal routine
	Description	One of the internal routines to manage TUXEDO System/T data structures received an invalid parameter. This should not occur during normal system operation.
Action	Contact your BEA TUXEDO system Technical Support.
See Also	`tmconfig`(1)
1198	*ERROR: Cannot detach: operating system error: errno = errno_val.*
	Description	The application is running with the TMPROTECTED SYSTEM_ACCESS value. Detaching from the bulletin board failed.
Action	Check the errno_val to determine why the detach failed.
1199	*ERROR: Cannot re-attach: operating system error: errno = errno_val.*
	Description	The application is running with the TMPROTECTED SYSTEM_ACCESS value. The client or server was unable to re-attach to the bulletin board. This probably indicates that the application was shut down (abnormally) while the client or server was not attached.
Action	Check the errno_val to determine the reason for the failure. Check with the administrator to see if the application was shut down.

[Top] [Prev] [Next] [Bottom]