|
|
1700 |
ERROR: Could not execute, executable file not found | |
|
Description |
While activating a server, the new program could not be started (forked or spawned) because either the program does not exist or it is not correctly in the execution path. |
Action |
Check the existence of the desired server, the configured environment (TUXDIR and APPDIR) and that the server is executable. Re-try the operation. | |
See Also |
| |
1701 |
WARN: Status uncertain, Timeout period expired on /Admin blocking request | |
|
Description |
While trying to activate a server on a remote machine, the operation timed out. The status of the activation is not certain. |
Action |
Retrieve the status of active servers to determine the status of the server; it may still boot after a delay. Check the event log for the remote machine to see if there are administrative messages regarding the status of the server. | |
See Also |
| |
1702 |
ERROR: Could not execute, network send error | |
|
Description |
While trying to activate a server on a remote machine, a network error occurred while sending the request. |
Action |
Check the event log for related messages. The remote machine or the network may not be available. | |
See Also |
| |
1703 |
WARN: Status uncertain, Timeout period expired on /Admin blocking request | |
|
Description |
While trying to activate a server on a remote machine, the operation timed out. The status of the activation is not certain. |
Action |
Retrieve the status of active servers to determine the status of the server; it may still boot after a delay. Check the event log for the remote machine to see if there are administrative messages regarding the status of the server. | |
See Also |
| |
1704 |
WARN: Status uncertain, network receive error | |
|
Description |
While trying to activate a server on a remote machine, a network error occurred while receiving information about the request. |
Action |
Check the event log for related messages. The remote machine or the network may not be available. | |
See Also |
| |
1705 |
WARN: Status uncertain, pipe synchronization error | |
|
Description |
While trying to activate a server, the indication from the server that it is booted did not occur. Usually this indicates that the server did not activate correctly (e.g., it exited or aborted execution). |
Action |
Check the event log for related messages. If the server is not running and no messages appear, check to see if the program is running using operating system services. Also check for a core dump in $APPDIR. | |
See Also |
| |
1706 |
ERROR: No BBL available, cannot boot | |
|
Description |
An activation request for a server was received but the administrative servers for that machine have not yet been activated. |
Action |
Activate the administrative servers for a machine before any application servers. | |
See Also |
| |
1707 |
ERROR: No DBBL available, cannot boot | |
|
Description |
An activation request for a server was received but the administrative servers for that machine have not yet been activated. |
Action |
Activate the administrative servers for a machine before any application servers. | |
See Also |
| |
1708 |
ERROR: Invalid or unspecified administrative password | |
|
Description |
While activating a server on a remote site, an invalid administrative password was sent to or received from the remote machine. |
Action |
There are two possible ways to correct this problem. One is to set up the user invoking tmboot to include the appropriate password setting via the TUXADMPWFILE environment variable. The second is to modify the password file indicated on the tlisten command line to include the administrative password for this application. | |
See Also |
| |
1709 |
ERROR: Failed with System/T error message | |
|
Description |
While activating a server, a BEA TUXEDO system error occurred. The message will indicate the specific problem Typically, it involves the configurations (e.g., there might not be enough service or accessor entries). |
Action |
Correct the error and re-try the operation. | |
See Also |
| |
1710 |
ERROR: Failed with code code | |
|
Description |
While activating a server, a BEA TUXEDO system error occurred. The message will indicate the specific problem Typically, it involves the configurations (e.g., there might not be enough service or accessor entries). |
Action |
Correct the error and re-try the operation. | |
See Also |
| |
1711 |
ERROR: Could not boot any servers | |
|
Description |
A TMIB request to activate one or more servers failed (no servers were booted). |
Action |
Check the event log for earlier related messages. | |
See Also |
| |
1712 |
ERROR: Could not tmunloadcf config file for propagation to remote site | |
|
Description |
As part of booting a non-master machine, the configuration file is unloaded and propagated to the remote machine. This operation failed. |
Action |
Check that $TUXDIR/bin/tmunloadcf exists and is executable. Check for operating system errors that might prevent its execution (lack of system resources such as process table entries, free space in the file system, etc.). Correct the problem and re-try the operation. | |
See Also |
| |
1713 |
ERROR: Could not access unloaded configuration file for propagation | |
|
Description |
As part of booting a non-master machine, the configuration file is unloaded and propagated to the remote machine. This operation failed because the temporary file created to hold the configuration could not be opened. |
Action |
Check for operating system errors that might prevent its execution (free space in the file system, etc.). Correct the problem and re-try the operation. Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
1714 |
ERROR: Send failure on TUXCONFIG propagation to lmid | |
|
Description |
As part of booting a remote machine, an error occurred in propagating the configuration file. Check the event log, both on the master and remote machines for related messages. |
Action |
Check the event log, both on the master and remote machines for related messages. Correct the problem and re-try the operation. | |
See Also |
| |
1715 |
ERROR: Receive failure on TUXCONFIG propagation to lmid | |
|
Description |
As part of booting a remote machine, an error occurred in propagating the configuration file. Check the event log, both on the master and remote machines for related messages. |
Action |
Check the event log, both on the master and remote machines for related messages. Correct the problem and re-try the operation. | |
See Also |
| |
1716 |
ERROR: Could not create remote tmp file on lmid for file creation | |
|
Description |
As part of booting a non-master machine, lmid, an error occurred in propagating the configuration file. Check the event log, both on the master and remote machines for related messages. |
Action |
Check the event log, both on the master and remote machines for related messages. | |
See Also |
| |
1717 |
ERROR: tmloadcf error on lmid for file creation, tmloadcf output: | |
|
Description |
While processing a TMIB request to boot a non-master machine, an error failed in loading the configuration file. The message will contain the output of the failed load command. |
Action |
Check the message to determine the problem. Correct the problem and re-try the operation. | |
See Also |
| |
1719 |
ERROR: Unknown error propagating TUXCONFIG file to lmid | |
|
Description |
While activating a non-master machine, an error occurred in propagating the configuration file to the remote machine, lmid. |
Action |
Check the event log for related messages. Correct the problem and re-try the operation. | |
See Also |
| |
1729 |
WARN: Status uncertain, Timeout period expired on /Admin blocking request | |
|
Description |
While trying to activate a server on a remote machine, the operation timed out. The status of the activation is not certain. |
Action |
Retrieve the status of active servers to determine the status of the server; it may still boot after a delay. Check the event log for the remote machine to see if there are administrative messages regarding the status of the server. | |
See Also |
| |
1730 |
INFO: About to activate server | |
|
Description |
This message indicates that a server is about to be activated in response to a TMIB request. |
Action |
No action required. | |
See Also |
| |
1731 |
INFO: About to deactivate server | |
|
Description |
This message indicates that a server is about to be deactivated in response to a TMIB request. |
Action |
No action required. | |
See Also |
| |
1732 |
ERROR: Application initialization failure | |
|
Description |
A server activation failed because the server initialization function returned an error. |
Action |
Administrative servers normally write a message to the event log. If this is an application server, then check whatever feedback mechanism is used in the application. | |
See Also |
| |
1733 |
INFO: Duplicate server | |
|
Description |
A server activation failed because a server with the same TA_SRVGRP and TA_SRVID is already active. |
Action |
No action required. | |
See Also |
| |
1734 |
ERROR: Identifier for DOMAINID must be <= number characters in length | |
|
Description |
The value specified for the DOMAINID parameter in the RESOURCES section of the |
Action |
Shorten the value specified for this attribute and rerun | |
See Also |
BEA TUXEDO Administrator's Guide, | |
1735 |
WARN: Timeout period expired on /Admin request | |
|
Description |
While processing a TMIB request for tlisten information, the operation timed out. Normally this indicates that the remote machine or the network is unavailable or slow. |
Action |
Check the event log for the remote machine to see if there are administrative messages regarding the status of the machine. | |
See Also |
| |
1736 |
ERROR: Services names beginning with '.' are reserved for system servers | |
|
Description |
|
Action |
Modify the options to the | |
See Also |
BEA TUXEDO Programmer's Guide, | |
1737 |
ERROR: Could not process internal *MIBPERMS section | |
|
Description |
While loading an application configuration, multiple *MIBPERMS sections exist or the value of a string is greater than 30 characters in length. |
Action |
Normally, this section is not generated by the administrator, but is generated only during activation of a remote machine. Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
1738 |
ERROR: Invalid command name cmdname | |
|
Description |
The executable file |
Action |
Modify the command line to use the supported command names. | |
See Also |
| |
1739 |
ERROR: usage: cmdname <usrname> <file> [<cltname>] | |
|
Description |
Either the tpdelusr or tpmodusr command (indicated by cmdname) was invoked improperly. |
Action |
Correct the command line and retry the command. | |
See Also |
| |
1740 |
ERROR: usage: cmdname <usrname> <file> [<cltname> [<uid>]] | |
|
Description |
The tpaddusr command (indicated by cmdname) was invoked improperly. |
Action |
Correct the command line and retry the command. | |
See Also |
| |
1741 |
ERROR: User name (usr) is too long, maximum num characters | |
|
Description |
The username usr specified on the tpaddusr, tpdelusr, or tpmodusr command line is too long (greater than num characters). |
Action |
Correct the command line and retry the command. | |
See Also |
| |
1742 |
ERROR: Non-numeric value for user id | |
|
Description |
The user id specified on the tpaddusr, tpdelusr, or tpmodusr command line is non-numeric. |
Action |
Correct the command line and retry the command. | |
See Also |
| |
1743 |
ERROR: Client name (clt) is too long, maximum num characters | |
|
Description |
The client name clt specified on the tpaddusr, tpdelusr, ortpmodusr command line is too long (greater than num characters). |
Action |
Correct the command line and retry the command. | |
See Also |
| |
1744 |
ERROR: Could not access file file, error | |
|
Description |
The password file file could not be accessed due to a UNIX error indicated by the message error. |
Action |
Correct the problem using the appropriate UNIX tools as indicated by the UNIX error message displayed. | |
See Also |
| |
1745 |
ERROR: Could not open file file for read/write | |
|
Description |
The password file file could not be accessed for update due to a UNIX permissions restriction. |
Action |
Correct the permissions on the relevant files and/or directories and retry the command. | |
See Also |
| |
1746 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
See Also |
| |
1748 |
ERROR: User already exists | |
|
Description |
The user being added using the tpaddusr command already exists in the password file. |
Action |
Use the command tpmodusr to modify an existing user's entry in the password file. | |
See Also |
| |
1749 |
ERROR: Failed to add user | |
|
Description |
The user could not be added to the password file because of errors that occurred while prompting or attempting to prompt for a password value for the user. |
Action |
Be sure to run tpaddusr with stdin from the terminal, and be sure not to interrupt the command with the break key or any other interrupts. | |
See Also |
| |
1750 |
ERROR: Invalid user specified for deletion | |
|
Description |
The user was not found in the password file and therefore could not be deleted. |
Action |
Check that the correct user name is being used and rerun the tpdelusr command if necessary. | |
See Also |
| |
1751 |
ERROR: Invalid user specified for modification | |
|
Description |
The user was not found in the password file and therefore could not be modified. |
Action |
Check that the correct user name is being used and rerun the tpmodusr command if necessary. | |
See Also |
| |
1752 |
ERROR: Failed to modify user | |
|
Description |
The user could not be modified in the password file because of errors that occurred while prompting or attempting to prompt for a new password value for the user. |
Action |
Be sure to run tpmodusr with stdin from the terminal, and be sure not to interrupt the command with the break key or any other interrupts. | |
See Also |
| |
1753 |
ERROR: Could not open file file for writing | |
|
Description |
The password file could not be opened for writing. |
Action |
Be sure the directories and permissions allow the password file to be created and written as necessary. | |
See Also |
| |
1754 |
ERROR: System error writing file file, error | |
|
Description |
The password file file could not be written due to a UNIX error indicated by the message error. |
Action |
Correct the problem using the appropriate UNIX tools as indicated by the UNIX error message displayed. | |
See Also |
| |
1755 |
ERROR: tpsvrinit: can't retrieve own table entry | |
|
Description |
A migrating DBBL could not retrieve its own server table entry from the bulletin board. This indicates a corrupt bulletin board on the backup master site. |
Action |
Contact your BEA TUXEDO system Technical Support for assistance in recovering the application. Consideration may need to be given to using protected mode access to avoid bulletin board corruption by the application. | |
See Also |
| |
1757 |
ERROR: Invalid class specified | |
|
Description |
An error occurred in handling a TMIB request for the T_BRIDGE class. |
Action |
Check the event log for additional information. | |
See Also |
| |
1758 |
WARN: Could not update master site information completely | |
|
Description |
System tables identifying master site information could not be updated due to failed configuration file access and/or table lookup. |
Action |
Shut down the site on which the message appeared as soon as possible and reboot it to force repropagation of up to date information. | |
See Also |
| |
1759 |
WARN: Could not update master site information | |
|
Description |
System tables identifying master site information could not be updated due to failed configuration file access and/or table lookup. |
Action |
Shut down the site on which the message appeared as soon as possible and reboot it to force repropagation of up to date information. | |
See Also |
| |
1760 |
WARN: BB out of date, machine=lmid | |
|
Description |
The logical machine lmid has an out of date bulletin board, most likely due to communications failures or delays. |
Action |
None. The system reacts to this situation automatically by propagating a new copy of the bulletin board to the affected site. | |
1761 |
WARN: TUXCONFIG file out of date, machine=lmid | |
|
Description |
The logical machine lmid has an out of date configuration file, most likely due to communications failures or delays. |
Action |
None. The system reacts to this situation automatically by propagating a new copy of the configuration file to the affected site. | |
1762 |
INFO: Sending new TUXCONFIG file to machine lmid | |
|
Description |
The system has determined that the logical machine lmid has an out of date configuration file and is sending a new copy to that site. |
Action |
None. | |
1763 |
ERROR: Failed to find configuration information on machine lmid | |
|
Description |
The system could not find configuration information about the logical machine lmid that it needs to propagate a new configuration file to that machine. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
1764 |
ERROR: Failed to propagate updated configuration information to machine lmid | |
|
Description |
The system could not propagate a new configuration file to the logical machine lmid. |
Action |
Check to make sure the | |
See Also |
| |
1766 |
ERROR: tpcall() failed, tperrmsg | |
|
Description |
The command |
Action |
Determine from the specific cause of the error if the problem can be corrected administratively or is a transient problem (for example, a timeout). Contact your BEA TUXEDO system Technical Support for assistance if unsure of how to resolve the situation. | |
See Also |
BEA TUXEDO Administrator's Guide, | |
1768 |
ERROR: Passwords do not match | |
|
Description |
The passwords entered for the original and confirming password prompts when executing the command |
Action |
Retry the command being careful to enter identical password entries for the two prompts. | |
See Also |
| |
1769 |
ERROR: Passwords do not match | |
|
Description |
The passwords entered for the original and confirming password prompts when executing the command |
Action |
Retry the command being careful to enter identical password entries for the two prompts. | |
See Also |
| |
1771 |
WARN: MAXDRT increased from num1 to num2 to meet configured routing criteria | |
|
Description |
The configured value num1 for the MAXDRT parameter in the RESOURCES section of the |
Action |
The ASCII version of the configuration file should be updated to reflect the change either manually or using | |
See Also |
| |
1772 |
WARN: MAXRFT increased from num1 to num2 to meet configured routing criteria | |
|
Description |
The configured value num1 for the MAXRFT parameter in the RESOURCES section of the |
Action |
The ASCII version of the configuration file should be updated to reflect the change either manually or using | |
See Also |
| |
1773 |
WARN: MAXRTDATA increased from num1 to num2 to meet configured routing criteria | |
|
Description |
The configured value num1 for the MAXRTDATA parameter in the RESOURCES section of the |
Action |
The ASCII version of the configuration file should be updated to reflect the change either manually or using tmunloadcf. | |
See Also |
| |
1775 |
ERROR: MAXDRT parameter must be >= 0 and < 32768 | |
|
Description |
The MAXDRT parameter in the RESOURCES section of the |
Action |
Correct the | |
See Also |
BEA TUXEDO Administrator's Guide, | |
1777 |
ERROR: MAXRFT parameter must be >= 0 and < 32767 | |
|
Description |
The MAXRFT parameter in the RESOURCES section of the |
Action |
Correct the | |
See Also |
BEA TUXEDO Administrator's Guide, | |
1779 |
ERROR: MAXRFT parameter must be >= 0 and < 32761 | |
|
Description |
The MAXRTDATA parameter in the RESOURCES section of the |
Action |
Correct the | |
See Also |
BEA TUXEDO Administrator's Guide, | |
1780 |
INFO: Server activated successfully | |
|
Description |
A TMIB request to activate a server completed successfully. |
Action |
No action required. | |
See Also |
| |
1781 |
INFO: Server deactivated successfully | |
|
Description |
A TMIB request to deactivate a server completed successfully. |
Action |
No action required. | |
See Also |
| |
1786 |
ERROR: Unlicensed TUXEDO System Binary | |
|
Description |
The files in your BEA TUXEDO system installation do not contain the expected software license information, such as the maximum number of licensed users. The installation program prompted the installer for this information at installation time. |
Action |
Reinstall the BEA TUXEDO system software, using the license token and serial number supplied with the distribution media. Make sure not to terminate the installation program prematurely, because the license information is processed at the end. | |
1787 |
ERROR: Expired TUXEDO System Binary | |
|
Description |
Your copy of the BEA TUXEDO system software is an evaluation copy, and the expiration date has passed. |
Action |
If you wish to continue using the BEA TUXEDO system, contact the company from which you received the product. | |
1788 |
WARN: Could not advertise administrative service | |
|
Description |
The BRIDGE could not offer the administrative service necessary to support access to the T_BRIDGE class via the /AdminAPI. The BRIDGE will still start and handle application network communication. |
Action |
Check the system sizing parameters, specifically the TA_MAXSERVICES attribute of the T-DOMAIN class to make sure it is set sufficiently high to allow for system services. Also check the userlog for additional information. The system may need to be brought down and reconfigured to resolve this problem. | |
See Also |
| |
1789 |
ERROR: String for PREFERENCES must be <= num characters in length | |
|
Description |
The string value for the PREFERENCES parameter in the RESOURCES section of the UBBCONFIG file is too large, that is, greater than <num> characters. |
Action |
Shorten the value for the parameter and rerun tmloadcf. | |
See Also |
| |
1791 |
ERROR: SANITYSCAN parameter must be > 0 and < 32768 | |
|
Description |
The SANITYSCAN parameter is not within acceptable limits. |
Action |
Set SANITYSCAN to the proper value in the UBBCONFIG file. | |
1793 |
ERROR: DBBLWAIT parameter must be > 0 and < 32768 | |
|
Description |
The DBBLWAIT parameter is not within acceptable limits. |
Action |
Set DBBLWAIT to the proper value in the UBBCONFIG file. | |
1795 |
ERROR: BBLQUERY parameter must be > 0 and < 32768 | |
|
Description |
The BBLQUERY parameter is not within acceptable limits. |
Action |
Set BBLQUERY to the proper value in the UBBCONFIG file. | |
1797 |
ERROR: BLOCKTIME parameter must be > 0 and < 32768 | |
|
Description |
The BLOCKTIME parameter is not within acceptable limits. |
Action |
Set BLOCKTIME to the proper value in the UBBCONFIG file. | |
1799 |
ERROR: SCANUNIT parameter must be > 0 and <= 60 | |
|
Description |
The SCANUNIT parameter is not within acceptable limits. |
Action |
Set SCANUNIT to the proper value in the UBBCONFIG file. |
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|