|
|
200 |
ERROR: Invalid service information given | |
|
Description |
The service requested to be unadvertised is invalid. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
See Also |
| |
201 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
202 |
ERROR: No bulletin board | |
|
Description |
The process is currently not attached to the Bulletin Board so the service cannot be offered. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
203 |
ERROR: Invalid service information given, NULL name | |
|
Description |
Function called without proper parameters - null service to offer. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
205 |
ERROR: Invalid service information given, function name too long | |
|
Description |
Function called with improper parameters - function name too long. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
206 |
ERROR: Invalid service information given, bad function address | |
|
Description |
Function called with improper parameters - function address cannot be found. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
210 |
ERROR: tmbbclean failed, couldn't find DBBL | |
|
Description |
Could not find structures/information associated with the DBBL. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
211 |
ERROR: tmbbclean failed, couldn't find BBL | |
|
Description |
Could not find structures/information associated with the BBL. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
212 |
ERROR: tmbbclean failed, message send/receive error | |
|
Description |
Sending of message to the BBL/DBBL to clean up and check status of local Bulletin Board failed. |
Action |
Check prior messages or check if message queue is blocked. If queue is blocked, system usage could be heavy and parameters may need to be tuned. | |
213 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
216 |
WARN: Process pid died; removing from BB | |
|
Description |
The process that was attached to the BB died, so the BB is cleaning up. |
Action |
No action required for BB, but you may want to investigate why the process died. | |
217 |
WARN: pid=pid died leaving BB locked; cleaning up | |
|
Description |
The process that was attached to the BB died and holds a user-level semaphore, so the BB is cleaning up. |
Action |
No action required for BB, but you may want to investigate why the process died. | |
218 |
ERROR: Error cleaning BB owner | |
|
Description |
An error occurred in cleaning up after a dead process. Either the slot could not be found, or a prior message indicates a semaphore error. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
221 |
ERROR: Error putting ENVFILE filename into environment | |
|
Description |
The server could not process the ENVFILE properly. This includes not being able to find, open, or read it. |
Action |
Check the path of ENVFILE, and the permissions and owner of the file. | |
See Also |
| |
222 |
ERROR: Cannot get service parms for server | |
|
Description |
The server could not process the parameters for a service specified in the TUXCONFIG file. This includes a problem with loading the information from the SERVICES section, or not understanding some of the parameters (for example, buffer types.) |
Action |
Check the SERVICES section of the UBBCONFIG file for correct parameters. | |
See Also |
| |
223 |
WARN: Duplicate server | |
|
Description |
An instantiation of this server already exists and this is a duplicate. It will exit gracefully. |
Action |
Check that the server that you wish to start is correct. If the server died unexpectedly or is hung, the process needs to be killed if hung, and the bulletin board must be given time to clean up after the killed process before starting the server again. | |
230 |
ERROR: Buffer type tables not available | |
|
Description |
The process is currently not attached to the Bulletin Board so it could not access the type switch table. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
236 |
ERROR: Remote tmnwkill timed out count secs | |
|
Description |
The process tried to signal a remote process, and a message was sent to the bridge process on the remote side to perform the fill for it. The reply to indicate the success/failure of the operation did not return before the operation timed out. |
Action |
This timeout could be a sign of network congestion, but is not a specific network failure, other than the operation did not return in time. If the network is not a problem, then the timeout is too small for the speed with which the signal request can be met. | |
237 |
ERROR: semctl err: errno = errno_val, key = key_val | |
|
Description |
The |
Action |
The semaphore set was somehow removed. If this does happen, the system will eventually fail. Contact your BEA TUXEDO system Technical Support. | |
245 |
WARN: Invalid LMID specification: PMID=mid | |
|
Description |
An erroneous LMID has been specified and an attempt to locate it has failed. |
Action |
Check and edit the UBBCONFIG file such that all specified LMIDs reference the correct machine. | |
See Also |
| |
248 |
ERROR: System init function failed, Uunixerr = errno_val | |
|
Description |
The server has failed to join the application. |
Action |
See surrounding messages for reasons for failure to join. | |
See Also |
| |
250 |
ERROR: tpsvrinit() failed | |
|
Description |
A call to |
Action |
Check prior specific | |
See Also |
| |
251 |
ERROR: tpsvrinit() failed with outstanding message handles | |
|
Description |
A call to |
Action |
Check prior specific | |
See Also |
| |
252 |
WARN: Cannot synchronize with tmboot...continuing | |
|
Description |
The connection with tmboot was lost by the forking process. If on the same node where tmboot is running, the pipe with tmboot was lost and may be due to the tmboot process being killed. If on a remote node, the pipe to the TAGENT process was lost, which may be due to the TAGENT process being killed. |
Action |
No action required, although the cause of tmboot/TAGENT dying should be investigated if not known. | |
See Also |
| |
253 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
254 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
255 |
INFO: Duplicate -A option ignored | |
|
Description |
Multiple -A options were specified to the server in the CLOPT line of the UBBCONFIG file. |
Action |
Check the CLOPT option in the configuration file. | |
See Also |
| |
256 |
WARN: Queue address must be numeric | |
|
Description |
The queue address, as specified to the server through the -Q option of CLOPT, is non-numeric. |
Action |
Check the address specified for the -Q option in the configuration file. | |
See Also |
| |
257 |
WARN: Invalid lock argument, setting to PROCLOCK | |
|
Description |
The lock argument, as specified to the server through the -l option in CLOPT, is invalid. It must be one of "'t' (TEXTLOCK)," "'d' (DATALOCK)," 'b' or "'p' (PROCLOCK)." The argument is ignored and is set to 'p' for PROCLOCK. |
Action |
Check the lock argument for the -l option in CLOPT in the configuration file. | |
See Also |
| |
258 |
WARN: Memory lock plock() failed | |
|
Description |
An attempt to lock the process in core has failed. This was requested by setting the lock option, -l, on the CLOPT option to the server in the configuration file. The error can occur when the server not being run as super-user, the requested lock is already on the process, or the system is out of memory. |
Action |
Make sure the server is being started as super-user (and that the tmboot process is running as super-user). If the application can run its own code ( | |
See Also |
| |
259 |
WARN: nice() failed | |
|
Description |
An attempt to change the priority of the process has failed. This was requested by setting the -n option on the CLOPT option to the server in the configuration file. This can be caused by the option to -n being negative or greater than 39, and not super-user. |
Action |
Check that the argument to the -e option of CLOPT is correct in the configuration file. | |
See Also |
| |
260 |
WARN: Cannot open path as stderr, Uunixerr = Uunixerr | |
|
Description |
An attempt to open the file for stderr failed. This file may have been specified by the -e option on the CLOPT option to the server in the configuration file. This can be caused by the inability to access the path given as the argument to the -e option. |
Action |
Check that the argument to the -e option of CLOPT is correct in the configuration file. | |
See Also |
| |
261 |
WARN: Cannot open path as stdout: Uunixerr = Uunixerr | |
|
Description |
An attempt to open the file for stout failed. This file may have been specified by the -o option on the CLOPT option to the server in the configuration file. This can be caused by the inability to access the path given as the argument to the -o option. |
Action |
Check that the argument to the -o option of CLOPT is correct in the configuration file. | |
See Also |
| |
262 |
INFO: Standard main starting | |
|
Description |
The arguments have been successfully processed, and joining the application will continue. |
Action |
No action required. | |
263 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
264 |
ERROR: Cannot set server group/id | |
|
Description |
This cannot happen because code changed to use a local variable, not a passed-in variable. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
267 |
INFO: Duplicate advertisement of service svcname ignored | |
|
Description |
A request to advertise the same service a second time is ignored. |
Action |
Check the configuration file for multiple occurrences of the service on the -s option. | |
See Also |
| |
268 |
ERROR: Failed to stop serving | |
|
Description |
The server did not properly shut down. |
Action |
There may be prior messages to describe the problem. In any case, the BBL should clean up after the process. | |
270 |
ERROR: Restart sync error errno | |
|
Description |
An internal error occurred during a restart of a process. An acknowledgment that the process was restarted was never received. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
271 |
ERROR: System lock semop failure, key = key (errno = errno) | |
|
Description |
In an attempt to lock the bulletin board, a call to semop(2) failed. |
Action |
Examine the value returned in the UNIX System errno, and attempt to fix the problem described by the errno. If unable to do so, contact your BEA TUXEDO system Technical Support. | |
272 |
ERROR: System unlock semop failure, key = key (errno = errno) | |
|
Description |
In an attempt to unlock the bulletin board, a call to semop(2) failed. |
Action |
Examine the value returned in the UNIX System errno and attempt to fix the problem described by the errno. If unable to do so, contact your BEA TUXEDO system Technical Support. | |
294 |
ERROR: function: FSCONFIG not or incorrectly set | |
|
Description |
The variable FSCONFIG is either not set or has been incorrectly set. |
Action |
Check and edit the UBBCONFIG file and make sure the FSCONFIG environment variable is set correctly. | |
See Also |
| |
295 |
ERROR: funcname: corrupted VTOC or different release | |
|
Description |
An attempt to access the VTOC has failed because the existing VTOC has either been corrupted or was created by a different release of the TUXEDO System. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
296 |
ERROR: funcname: VTOC not initialized | |
|
Description |
An attempt to access the VTOC has failed because the existing VTOC has not been properly initialized. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
297 |
ERROR: funcname: no space can be allocated for disk table or for VTOC/UDL | |
|
Description |
An attempt to allocate space within the VTOC has failed because there are no more available slots. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
298 |
ERROR: funcname: Read beyond initialized file boundary. | |
|
Description |
An attempt to access information in the VTOC has failed because the read has gone past the set boundaries of the VTOC. |
Action |
Contact your BEA TUXEDO system Technical Support. | |
299 |
ERROR: funcname: Write beyond initialized file boundary. | |
|
Description |
An attempt to write information to the VTOC has failed because the write has gone past the set boundaries of the VTOC. |
Action |
Contact your BEA TUXEDO system Technical Support. |
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|