![]() |
![]() |
|
|
1200 |
INFO: .SysClientState: User usrname on LMID state change to state | |
|
Description |
This message indicates that the client specified above changed to a new state. A complete listing of the current attributes of the client are sent in the posted buffer. |
Action |
This is an informational message. | |
See Also |
| |
1201 |
WARN: .SysClientSecurity: User usrname on LMID authentication failure | |
|
Description |
This message indicates that the client specified above failed security validation when trying to join the application. A complete listing of the current attributes of the client are sent in the posted buffer. |
Action |
Check to make sure that this is not some hacker trying to gain access to your application data. | |
See Also |
| |
1206 |
ERROR: Memory allocation failure error_info | |
|
Description |
An attempt dynamically to allocate memory from the operating system failed while trying to compress a message. Additional information about the problem is printed as part of the message. |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1207 |
ERROR: Expected numeric argument to -c option | |
|
Description |
A non-numeric argument was passed to the |
Action |
Change the configuration of the | |
See Also |
| |
1215 |
ERROR: Expected numeric argument to -k option | |
|
Description |
A non-numeric argument was passed to the |
Action |
Change the configuration of the | |
See Also |
| |
1216 |
ERROR: Expected numeric argument to | |
|
Description |
The |
Action |
Change the | |
1217 |
ERROR: Expected numeric argument to | |
|
Description |
The |
Action |
Change the | |
1218 |
ERROR: The | |
|
Description |
minport must be less than or equal to maxport, and both must be less than or equal to 65535. |
Action |
Change the | |
1219 |
ERROR: Memory allocation failure | |
|
Description |
While creating a data structure to keep track of TCP port numbers, the system ran out of memory. |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1220 |
ERROR: Exhausted all available ports | |
|
Description |
The workstation listener has tried all TCP ports within the range specified by the |
Action |
If there are more workstation handlers than ports available in the range specified by | |
1221 |
ERROR: Could not establish listening address address | |
|
Description |
The workstation listener has tried all TCP ports within the range specified by the |
Action |
If there are more workstation handlers than ports available in the range specified by | |
1222 |
ERROR: Expected numeric argument to -z option | |
|
Description |
The |
Action |
Change the | |
1223 |
ERROR: Expected numeric argument to -Z option | |
|
Description |
The |
Action |
Change the | |
1224 |
ERROR: Link Level Encryption add-on package is not installed | |
|
Description |
The minimum number of encryption bits was greater than zero, but there is no link level encryption add-on package installed on this machine. |
Action |
Install the link level encryption package or change the minimum encryption bits (the | |
1229 |
WARN: A client failed encryption negotiation | |
|
Description |
A workstation client attempted to log in to the system, but could not negotiate an acceptable encryption level. |
Action |
When workstation clients log into the system, they negotiate encryption strength with the workstation listener. If the client and listener cannot agree on the level of encryption (for example, if the workstation listener demands 128-bit encryption and the client can only speak 40-bits encryption) then this message will appear. The administrator can either change the encryption policy of the workstation listener or workstation client. | |
1230 |
ERROR: Invalid security protocol | |
|
Description |
An invalid opcode was attempted while the workstation listener was insecure. |
Action |
Monitor your network for malicious use. Contact BEA Customer Support. | |
1231 |
ERROR: Memory allocation error | |
|
Description |
While negotiating the Diffie-Hellman parameters, the workstation listener ran out of memory. |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1232 |
ERROR: Encryption negotiation protocol error | |
|
Description |
An invalid opcode was attempted while the workstation listener was insecure. |
Action |
Monitor your network for malicious use. Contact BEA Customer Support. | |
1233 |
ERROR: Unable to get encryption handle | |
|
Description |
While negotiating the Diffie-Hellman parameters, the workstation listener had an error while attempting to get an encryption handle. |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1234 |
ERROR: Unable to establish negotiation parameters | |
|
Description |
An invalid opcode was attempted while the workstation listener was insecure. |
Action |
Monitor your network for malicious use. Contact BEA Customer Support. | |
1235 |
ERROR: Unable to send negotiation parameters | |
|
Description |
While attempting to send the Diffie-Hellman parameters to the client, an error occurred. |
Action |
The network may have experienced an error, or the client waiting for the security packet may have been killed. If neither of these events has occurred, contact BEA Customer Support. | |
1236 |
ERROR: Unable to begin encryption | |
|
Description |
After establishing the shared key, an error occurred while starting encryption. |
Action |
Monitor your network for malicious use. Contact BEA Customer Support. | |
1237 |
ERROR: tpnotify(TPACK) failed to reply, tperrno = tperrno | |
|
Description |
The workstation handler sent an acknowledged unsolicited message to a client. However, that client never sent its acknowledgment. |
Action |
The network may have experienced an error, or the client waiting for the notification may have been killed. | |
1238 |
ERROR: Invalid security parameters | |
|
Description |
The encryption level of the workstation listener is greater than zero bits, but the link level encryption package is not installed on this machine. |
Action |
The | |
1239 |
ERROR: Invalid security parameters | |
|
Description |
The encryption level of the workstation listener is greater than forty bits, but only the 40-bit link level encryption package is installed on this machine. |
Action |
The | |
1240 |
ERROR: Failed to read server table entry, tperrno = tperrno | |
|
Description |
The workstation listener was rebooting after a failure and could not read the server table. |
Action |
The bulletin board may be corrupted. | |
1241 |
ERROR: Sending of reply to tpbroadcast() or tpnotify() call to client failed | |
|
Description |
The workstation handler received an acknowledgment from a workstation client but was unable to forward the acknowledgment to the sender of the |
Action |
The originator of the | |
1242 |
ERROR: Bad Internet type of listening address provided: address | |
|
Description |
|
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change | |
1243 |
ERROR: -H hexadecimal value has to have an even length | |
|
Description |
If an address starts with 0x, then that address must be an even length of characters. |
Action |
A hexadecimal character represents a nibble (4 bits). A byte is 8 bits. To fully specify a byte, two characters are needed. Change the address to have an even number of characters. | |
1244 |
ERROR: Memory allocation failure | |
|
Description |
While creating a data structure for an address specified via the |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1245 |
ERROR: Bad hexadecimal number provided for external address: address | |
|
Description |
The hexadecimal address address from the |
Action |
Any address which starts with 0x must be a valid hexadecimal address. Valid hexadecimal characters are 0 - 9, a-f and A-F. Change | |
1246 |
ERROR: Bad Internet type of external address provided: address | |
|
Description |
The Internet address address from the |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats. | |
1247 |
ERROR: Memory allocation failure | |
|
Description |
While allocating space for the binary representation of the |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1248 |
ERROR: Memory allocation failure | |
|
Description |
While allocating space for the binary representation of the |
Action |
Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1249 |
ERROR: -H and -n have different length of network address | |
|
Description |
If you are using an external address, then that address must have the same format as the |
Action |
Change the | |
1250 |
ERROR: External address can not be resolved val | |
|
Description |
The Domain Name Service could not resolve the address given by the |
Action |
Make sure that the Domain Name Service knows the server represented by the address given in the | |
1251 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used be a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1252 |
ERROR: Unable to determine license level | |
|
Description |
While validating the value of the -c argument of the workstation listener, an error occurred while retrieving the current license attributes. |
Action |
Contact BEA Customer Support. | |
1253 |
ERROR: Workstation compression configured, but no license for workstation compression was found | |
|
Description |
You do not have a license to use workstation compression. |
Action |
Purchase a license for workstation compression. If you believe that you own and have installed the license for workstation compression, contact BEA Customer Support. | |
1254 |
ERROR: Bad conversational sequence number | |
|
Description |
Conversations are sequenced in order to provide protection. One of the conversational messages arrived out of order. The conversation has been disconnected, and if a transaction was active, it has been set to the |
Action |
Look at the userlog to determine whether or not the | |
1255 |
WARN: Couldn't change to client context num, continuing | |
|
Description |
An internal error was encountered while attempting to switch client contexts. |
Action |
Contact BEA Customer Support. | |
1256 |
WARN: .SysClientSecurity: User user on machine authentication failure | |
|
Description |
This is the system event message which is posted when a user fails authentication. |
Action |
The action depends on the security policy of the user. | |
1257 |
ERROR: Couldn't create buffer for receiving messages | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1258 |
WARN: No client context space available in handler | |
|
Description |
The maximum number of clients has been used up in the generic handler. |
Action |
Either increase the total number of clients allowable into the system, or do not attempt to connect to a loaded system. | |
1259 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1260 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1261 |
ERROR: tpinit() failed, tperrno = tperrno | |
|
Description |
A client was unable to enter the system from the generic handler. The tperrno may give clues as to the cause of this failure. |
Action |
Contact BEA Customer Support. | |
1262 |
ERROR: tpchkauth() failed, tperrno = tperrno | |
|
Description |
|
Action |
Contact BEA Customer Support. | |
1263 |
WARN: Forced shutdown of client; user name 'name'; client name 'client' | |
|
Description |
A forced shutdown of the given user name and client name has been performed by the generic handler. |
Action |
None. | |
1264 |
WARN: .SysClientDied: User user on machine client died | |
|
Description |
This is the event posted when a forced shutdown of the given user name on machine has been performed by the generic handler. |
Action |
None. | |
1265 |
ERROR: Error receiving messages, tperrno = TPEOS, Uunixerr = UMSGRCV | |
|
Description |
An operating system error occurred in the generic handler while reading a message queue. |
Action |
Ensure the sanity of the system. Contact BEA Customer Support. | |
1266 |
ERROR: Received message of type 'type' to tpinit() call | |
|
Description |
The only message type which tpinit takes is |
Action |
Ensure all clients of the generic handler provide the proper buffer type during | |
1267 |
ERROR: TPINIT information must be passed to tpinit() call in secure application | |
|
Description |
Secure applications must provide the |
Action |
Ensure all clients of the generic handler provide a | |
1268 |
ERROR: Invalid client name given 'client'. | |
|
Description |
The given client is invalid in the application. |
Action |
Ensure that the | |
1269 |
ERROR: Invalid length for TPINIT structure given | |
|
Description |
An invalid |
Action |
There may be a negative length in the | |
1270 |
ERROR: Failed to update registry table information | |
|
Description |
The generic handler was not able to update the BEA TUXEDO system registry information. |
Action |
Contact BEA Customer Support. | |
1271 |
ERROR: Failed to send message to authentication server, tperrno = tperrno | |
|
Description |
The generic handler was not able to send the |
Action |
Ensure that the authentication server is up and running, and that the | |
1272 |
WARN: Invalid notification option given, reset to TPU_IGN. | |
|
Description |
The generic handler does not handle the notification option from the client. |
Action |
Ensure that all clients change the notification options to one which the generic handler is able to accept. | |
1273 |
INFO: .SysClientState: User user on machine state change to state | |
|
Description |
This event is posted by the generic handler whenever the user on machine changes state. The new state is given in state. |
Action |
None. | |
1274 |
INFO: Abortively disconnecting workstation client user[user], client[client] | |
|
Description |
The generic handler is disconnecting a client which is believed to be dead. |
Action |
None. | |
1275 |
INFO: Userid: [userid], Clientid: [clientid] timed out due to inactivity | |
|
Description |
The generic handler timed out the given userid and clientid. |
Action |
None. | |
1276 |
ERROR: Received message with unknown release number value | |
|
Description |
The |
Action |
If this error happens consistently, then contact BEA Customer Support. | |
1277 |
ERROR: Memory allocation failure | |
|
Description |
An attempt dynamically to allocate memory from the operating system using malloc failed while initializing the |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1278 |
ERROR: Address conversion error | |
|
Description |
The |
Action |
If this error happens consistently, then contact BEA Customer Support. | |
1279 |
ERROR: descriptor allocation error | |
|
Description |
The |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1280 |
ERROR: Could not initialize network (error) | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support. | |
1281 |
ERROR: Could not initialize global information (error) | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support. | |
1282 |
ERROR: Failed to initialize network protocol information (error) | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support. | |
1283 |
ERROR: Network error (error) servicing network event | |
|
Description |
The |
Action |
Ensure that the network is viable on the machine. If the network is viable, contact BEA Customer Support. | |
1284 |
WARN: Failed to allocate a network resource (error) | |
|
Description |
The |
Action |
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. | |
1285 |
ERROR: Expected numeric argument to -N option | |
|
Description |
The |
Action |
Modify the | |
1286 |
ERROR: -K argument must be client, handler, both, or none | |
|
Description |
The |
Action |
Ensure that the | |
1287 |
WARN: Forced shutdown of client; user name 'name'; client name 'name'; workstation address 'xxx.xxx.xxx.xxx' | |
|
Description |
This may result from shutting down a |
Action |
If | |
1288 |
WARN: setsockopt() for SO_KEEPALIVE failed | |
|
Description |
The |
Action |
This error is ignored and | |
See Also |
| |
1289 |
WARN: KEEPALIVE option requested but not available on this platform | |
|
Description |
The |
Action |
This error is ignored and | |
See Also |
| |
1290 |
ERROR: Can't parse the address address | |
|
Description |
While attempting to resolve address, an error occurred. |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server. | |
1291 |
ERROR: Can't resolve host name in address address | |
|
Description |
While attempting to resolve the host name portion of address, an error occurred. |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server. | |
1292 |
ERROR: Unknown address type: address | |
|
Description |
The given address does not correspond to a type known by the system. |
Action |
The BEA TUXEDO System understands several types of address format. Addresses which start with // must be Internet addresses. Addresses which start with 0x are hexadecimal representations of the address. Other formats may or may not be understood by the BEA TUXEDO system. | |
1293 |
ERROR: Can't resolve port number in address address | |
|
Description |
While attempting to resolve the port number portion of address, an error occurred. |
Action |
Any address which starts with // must be a valid Internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server. | |
1294 |
ERROR: Can't convert the address address to binary format | |
|
Description |
An error occurred while converting address to an internal binary representation. |
Action |
Contact BEA Customer Support. | |
1295 |
ERROR: Illegal character in the address address | |
|
Description |
There is an illegal character in the port portion of address. Ports may only have alphanumeric characters. |
Action |
Remove the illegal character from the port portion of the address. | |
1296 |
ERROR: Missing port number in the address address | |
|
Description |
address must have a port number portion. |
Action |
Supply a port number portion in the given address. Otherwise, the | |
1297 |
ERROR: Port number cant be bigger than value in the address address | |
|
Description |
The port number portion of address is larger than the largest allowable port number of value. |
Action |
Change the port number to be within the specified range. | |
1298 |
ERROR: TUXDIR environment variable not set | |
|
Description |
The environment variable TUXDIR must be set when |
Action |
Set the environment variable TUXDIR before running | |
See Also |
|
|
Copyright © 2000 BEA Systems, Inc. All rights reserved.
|