CMDTUX Messages 800-899
|
|
|
802
ERROR: Cannot start servers, memory allocation failure
Description
During the booting of servers, memory could not be allocated for an internal structure.
Action
Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
803
ERROR: Cannot start servers, memory allocation failure
Description
During the booting of servers, memory could not be allocated for an internal structure.
Action
Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
804
ERROR: Cannot start TMS servers, error reading *GROUP section
Description
During the tmboot process, the GROUPS section of the configuration file could not be read.
Action
Verify that the environment variable TUXCONFIG is set correctly and exported, or that TUXCONFIG is not corrupted (try a tmunloadcf), or TUXCONFIG was propagated to all machines in the configuration.
See Also
tmboot(1), tmunloadcf(1)
805
ERROR: Cannot start servers, error reading *SERVERS section
Description
During the tmboot process, the SERVERS section of the configuration file could not be read.
Action
Verify that the environment variable TUXCONFIG is set correctly and exported. Make sure the TUXCONFIG file is not corrupted (try a tmunloadcf). Verify that the TUXCONFIG file was propagated to all machines in the configuration.
See Also
tmboot(1), tmunloadcf(1)
808
ERROR: Skipping aout=a.out, LOC=lmid - illegal LMID specification.
Description
During the tmboot process, the server specification used an illegal lmid and consequently the server a.out was not started.
Action
Verify that the correct lmid is used in the configuration file and reload the configuration once the server entry has been corrected.
See Also
tmboot(1), tmloadcf(1), ubbconfig(5)
809
ERROR: Argument vector formation error
Description
During the tmboot process, the command line options for a server to be booted is generated. An error has occurred in forming this string. The problem associated with this error is probably not caused by something the user has done.
Action
Contact your BEA TUXEDO system Technical Support.
810
ERROR: Aout=a.out - too many arguments
Description
During the tmboot process, the command line options for a server to be booted are generated. The resultant command line options string is longer that 256 characters and cannot be processed.
Action
Reduce the number of arguments or the length of parameters set, such as path names, wherever possible. Note that internal options may be added to the command line. Therefore, even if the command line options specified by the user have fewer than 256 characters, this error may occur.
See Also
tmboot(1)
812
ERROR: Illegal machine id value
Description
During the tmboot process, the specified servers are booted. The machine section of the TUXCONFIG file is read and an error has occurred in retrieving this information. The problem associated with this error is probably not caused by something the user has done.
Action
Contact your BEA TUXEDO system Technical Support.
813
ERROR: Illegal machine id value, mid, for a.out
Description
During the tmboot process, the specified servers are booted. The machine section of the TUXCONFIG file is read and an error has occurred in retrieving this information. The problem associated with this error is probably not caused by something the user has done.
Action
Contact your BEA TUXEDO system Technical Support.
814
ERROR: Cannot propagate TUXCONFIG file
Description
During the tmboot process, the TUXCONFIG file was not successfully propagated to the remote machine. This error may occur in a variety of ways.
tlisten may not be reached. This could be due to a mismatch of the network listener address in the UBBCONFIG file (the NLSADDR value) and the actual address that the tlisten process is using.
TAGENT on a remote node encounters an error while trying to process the configuration file.
Action
TUXCONFIG and the address used for the tlisten process.
TAGENT process.
See Also
tlisten(1), tmboot(1), ubbconfig(5)
815
ERROR: Cannot fork
Description
tmboot was unable to fork() a child process in order to start a BEA TUXEDO system process.
Action
The system resources are being used intensively. Try the boot command again. If this situation persists, contact your UNIX system administrator.
See Also
tmboot(1)
816
ERROR: Cannot exec, executable file not found
Description
While starting a BEA TUXEDO system or server process, the executable file was not found.
Action
For a BEA TUXEDO system process, make sure that the TUXDIR value of the lmid is set properly. The executables should be found in ${TUXDIR}/bin. For a server process, check the value of APPDIR for that lmid. Make sure that the server executable file is located in that directory.
See Also
tmboot(1), ubbconfig(5)
817
ERROR: Cannot exec, network send error
Description
While trying to contact a remote site to start BEA TUXEDO system processes or servers, a network error has occurred. Check the userlog to find out specific details of the failure.
Action
The boot command may be tried again. If the error persists, contact your network administrator.
See Also
tmboot(1)
818
WARN: Process id=pid Assume started (network).
Description
While booting BEA TUXEDO system processes or servers, tmboot did not receive the status from a network call. The system issues this message to point out that it is not aware of the process status.
Action
No action is necessary, however, it is useful to note the status of system processes during this scenario.
See Also
tmboot(1)
819
INFO: Process id=pid Assume started (pipe).
Description
While booting BEA TUXEDO system processes, tmboot receives an interrupt and the system issues this message to point out that it is not aware of the process status. Even though the boot process is interrupted (and perhaps aborted by the administrator), the local BEA TUXEDO system process currently being started may succeed or fail.
Action
No action is necessary, however, it is useful to note the status of system processes during this scenario.
See Also
tmboot(1)
821
INFO: Duplicate server.
Description
A boot command has been issued for a server that is already running. This message is issued to inform the administrator that a redundant boot command has been issued.
Action
No action is necessary.
822
ERROR: No BBL available, cannot boot
Description
While starting a server process, the BBL was not available; the server cannot join the application without this system process. All outstanding requests to boot servers will be ignored.
Action
Make sure that the BBL is running on the site that failed, and reissue the boot command that originally failed.
823
ERROR: No DBBL available, cannot boot
Description
While starting a server process on the master site, the DBBL was not available; the server cannot join the application without this system process. All outstanding requests to boot servers will be ignored.
Action
Make sure that the DBBL is running on the master site, and reissue the boot command that originally failed.
See Also
tmboot(1)
825
ERROR: Process a.out at lmid failed with /T tperrno (tperrno_val)
Description
This message prints out a BEA TUXEDO system /T error that has occurred in the process a.out while booting on the machine lmid.
Action
Check the userlog for messages from the a.out process to further determine what failure has occurred.
See Also
tmboot(1)
826
ERROR: Process a.out at lmid failed with code error_code
Description
This message prints out a BEA TUXEDO system error number that has occurred in the process a.out while booting on the machine lmid.
Action
Check userlog messages for the a.out process to further determine what failure has occurred.
See Also
tmboot(1)
827
ERROR: Fatal error encountered; initiating user error handler
Description
A fatal error has occurred and the user error handler is invoked.
Action
Check previous userlog messages to further determine what failure has occurred.
See Also
tmboot(1)
828
ERROR: Cannot create error process - fork() failed
Description
The system, in trying to initiate the user error handler, could not fork a new process (the fork() system call returns -1).
Action
This error is directly related to system resources (too many processes, lack of swap space, etc). Consult your UNIX system administrator for appropriate actions.
829
ERROR: Error executing `error_cmd - error
Description
The user has specified a command error_cmd to be executed if any process fails to boot (via the -e option). The system, in trying to initiate the user error handler, could not exec a new process (the execl() system call returns an error).
Action
The command specified should be checked.
See Also
tmboot(1)
830
ERROR: Could not get BB parameters
Description
An error has occurred while trying to read the data from the Bulletin Board. This error could occur in a variety of situations including not being able to open the TUXCONFIG file, an error in reading information from the TUXCONFIG file, trying to read a TUXCONFIG file from an old release, etc.
Action
Verify that the environment variable TUXCONFIG is set correctly and exported, or that the TUXCONFIG file is not corrupted (try a tmunloadcf). Also make sure that the TUXCONFIG file was propagated to all machines in the configuration. Check the userlog for additional details on this failure.
See Also
tmboot(1), tmunloadcf(1)
835
ERROR: Could not read *MACHINES section
Description
During the tmboot process, the MACHINES section of the configuration file could not be read.
Action
Verify that the environment variable TUXCONFIG is set correctly and exported, or that the TUXCONFIG file is not corrupted (try a tmunloadcf), or the TUXCONFIG file was propagated to all machines in the configuration.
See Also
tmboot(1), tmunloadcf(1)
840
ERROR: Could not read *GROUPS section
Description
During the tmboot process, the GROUPS section of the configuration file could not be read.
Action
Verify that the environment variable TUXCONFIG is set correctly and exported, or that the TUXCONFIG file is not corrupted (try a tmunloadcf), or the TUXCONFIG file was propagated to all machines in the configuration.
See Also
tmboot(1), tmunloadcf(1)
841
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up an entry for the IPC sizing information requested.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
tmboot(1)
842
ERROR: Could not read *SERVERS section
Description
During the tmboot process, the SERVERS section of the configuration file could not be read.
Action
Verify that the environment variable TUXCONFIG is set correctly and exported, or that the TUXCONFIG file is not corrupted (try a tmunloadcf), or the TUXCONFIG file was propagated to all machines in the configuration.
See Also
tmboot(1), tmunloadcf(1)
843
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up an entry for the IPC sizing information requested.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
tmboot(1)
844
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up an entry for system processes to be started.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
tmboot(1)
845
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up an entry for system processes to be started.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
tmboot(1)
846
ERROR: Illegal ctype
Description
The ctype of this entry in the TODO list is not CT_MCHID as expected.
Action
Contact your BEA TUXEDO system Technical Support.
847
ERROR: Memory allocation failure
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed while setting up a list of message queues to be created.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
tmboot(1)
848
ERROR: Machine id mismatch for GROUP set group_number
Description
The group_number used is present in the internal groups structure but the corresponding machine id doesn't match.
Action
Contact your BEA TUXEDO system Technical Support.
853
ERROR: tmloadcf error on lmid for TUXCONFIG file file creation
Description
While activating a remote machine, an error occurred when running tmloadcf to load the TUXCONFIG file. Additional information will be printed if tmloadcf printed any errors.
Action
This output may be used to further diagnose what has occurred during the tmloadcf failure.
See Also
tmboot(1), tmloadcf(1)
854
ERROR: tmloadcf error on lmid tmloadcf output:
Description
This message prints the output that occurred from tmloadcf from the remote site when the TUXCONFIG file was being propagated.
Action
This output may be used to further diagnose what has occurred during the tmloadcf failure.
See Also
tmboot(1)
856
ERROR: tmdump failed - can't find BBL
Description
While attempting to dump the Bulletin Board a system process, the BBL was not available; we cannot join the application without this system process.
Action
Make sure that the BBL is running on the site that failed, and reissue the dump command.
857
ERROR: tmdump failed - can't find DBBL
Description
While attempting to dump the Bulletin Board a system process, the DBBL was not available; we cannot join the application without this system process.
Action
Make sure that the DBBL is running on the site that failed, and reissue the dump command.
858
ERROR: tmdump failed
Description
The system was unable to create a buffer for the dump request message to be sent.
Action
Contact your BEA TUXEDO system Technical Support.
859
ERROR: tmdump failed
Description
Sending the system message to request a dump of the BBL has failed.
Action
Examine the userlog for additional error messages. Contact your BEA TUXEDO system Technical Support.
860
ERROR: Invalid option option_val
Description
The option specified is not a valid option to the tmloadcf command.
Action
Correct the options to the tmloadcf command as per the usage message.
See Also
tmloadcf(1)
862
ERROR: Current work directory path name is too long
Description
While executing tmloadcf, an attempt to get the current working directory path failed. This can indicate that either the directory pathname is greater than 78 characters in length or that the directory hierarchy is not readable.
Action
Check that the directory hierarchy has the proper permissions and is not longer than 78 characters, and re-execute the command.
863
ERROR: Absolute path name of the output file is too long
Description
The length of the absolute path name of the output file is greater than MAXTLSTRING. This file is given as the argument to the -o command line option.
Action
Specify a shorter path name.
864
ERROR: Can't open file filename
Description
While executing tmloadcf, the specified input file cannot be opened.
Action
Check that the input (UBBCONFIG) file exists and is readable, and re-execute the command.
See Also
tmloadcf(1)
865
ERROR: command: Parse failed
Description
While executing tmloadcf, an error occurred parsing the input UBBCONFIG file.
Action
Earlier warning or error messages will indicate the nature of the error. Correct these problems and re-execute the command.
See Also
tmloadcf(1)
866
ERROR: command: Severe error found. Stop syntax checking.
Description
While executing tmloadcf, an error occurred in the input UBBCONFIG file such that the TUXCONFIG file cannot be loaded. These errors include missing sections, multiple occurrences of sections, dynamic space allocation errors, etc, such that parsing of the input UBBCONFIG file was terminated before reading the entire file.
Action
Earlier warning or error messages will indicate the nature of the error. Correct these problems and re-execute the command.
See Also
tmloadcf(1)
867
ERROR: command: Above errors found during syntax checking
Description
While executing tmloadcf, one or more errors occurred in the input UBBCONFIG file such that the TUXCONFIG file cannot be loaded. Normally, this message indicates that the entire UBBCONFIG file was read and checked for errors.
Action
Earlier warning or error messages will indicate the nature of the error. Correct these problems and re-execute the command.
See Also
tmloadcf(1)
868
ERROR: command cannot run on a non-master node
Description
tmloadcf was run on a machine whose uname() does not match the physical machine name associated with the MASTER LMID in the RESOURCES section of the UBBCONFIG file.
Action
Change the value of MASTER in the RESOURCES section, or change the machine name associated with the LMID associated with MASTER in the MACHINES section, or run the command on the MASTER machine.
See Also
tmloadcf(1), ubbconfig(5)
869
ERROR: Can't open file filename
Description
While executing tmloadcf, the specified file, filename, could not be opened for reading. tmloadcf works by reading the input twice, and this failure occurs on the second pass. If the input is not from a file (for example, from the standard input), then the input is put into a temporary file and this file cannot be opened for reading.
Action
Check that this file still exists and has read permission. Re-execute the command.
See Also
tmloadcf(1)
870
ERROR: command: Error found in parsing input
Description
While executing tmloadcf, an error was found during the second pass of parsing the input.
Action
Re-execute the command. If the problem happens again, contact your BEA TUXEDO system Technical Support.
See Also
tmloadcf(1)
871
INFO: TUXCONFIG file filename has been created
Description
While executing tmloadcf, the input UBBCONFIG has been successfully processed and a new TUXCONFIG file or device, filename, has been created (that is, it did not exist and a new one was created).
Action
No action required.
See Also
tmloadcf(1)
872
INFO: TUXCONFIG file filename has been updated
Description
While executing tmloadcf, the input UBBCONFIG file has been processed and an existing TUXCONFIG file or device has been updated with the information.
Action
No action required.
See Also
tmloadcf(1)
873
ERROR: TUXCONFIG environment variable not set
Description
While executing tmloadcf, the TUXCONFIG environment variable has not been set and exported.
Action
Set and export the TUXCONFIG environment variable and re-execute the command.
See Also
tmloadcf(1)
874
ERROR: TUXOFFSET environment variable must >= 0
Description
While executing tmloadcf, the TUXOFFSET environment variable is not set correctly to a non-negative integer offset.
Action
Set and export the TUXOFFSET environment variable to a non-negative integer offset and re-execute the command.
See Also
tmloadcf(1)
875
ERROR: TUXCONFIG not set or incorrectly set
Description
While executing tmloadcf, an error occurred in checking the TUXCONFIG device.
Action
Check that either the TUXCONFIG device or file does not exist (if it is being created for the first time) or that it exists and is a valid configuration file. Contact your BEA TUXEDO system Technical Support.
See Also
tmloadcf(1)
876
ERROR: The value of -b option (blocks) is too small.
Description
While executing tmloadcf, the size specified for the -b option on the command is too small to hold the configuration.
Action
If TUXCONFIG is a UNIX file, it is recommended that the -b option not be specified so that tmloadcf can size the configuration file correctly. If TUXCONFIG is a raw device, then the -b option should be used to specify the total size in blocks of the device; if this was done, then a larger raw device is needed. CMDTUX message 877 indicates the minimum number of blocks needed for the file or device.
See Also
tmloadcf(1)
877
ERROR: TUXCONFIG file needs at least nblocks size-byte blocks
Description
While executing tmloadcf, the size specified for the -b command line option was too small. The minimum size needed is specified as nblocks.
Action
If TUXCONFIG is a UNIX file, it is recommended that the -b option not be specified so that tmloadcf can size the configuration file correctly. If TUXCONFIG is a raw device, then the -b option should be used to specify the total size in blocks of the device; if this was done, then a larger raw device is needed. The minimum number of blocks needed is specified in this message, nblocks.
See Also
tmloadcf(1)
878
ERROR: Can't create TUXCONFIG tuxconfig
Description
While executing tmloadcf, creation of the TUXCONFIG file failed.
Action
A subsequent system message will indicate the nature of the failure. Correct the problem and re-execute the command.
See Also
tmloadcf(1)
879
INFO: A new file system has been created. (size = nblocks size-byte blocks)
Description
While executing tmloadcf, a new TUXCONFIG file or device was created with the specified size, nblocks.
Action
No action required.
See Also
tmloadcf(1)
880
ERROR: Can't create tablename
Description
While executing tmloadcf, a failure occurred while trying to create the specified tablename. One table is created for each of the sections in the UBBCONFIG file.
Action
A subsequent system message will indicate the nature of the error. Correct the problem and re-execute the command.
See Also
tmloadcf(1)
881
ERROR: Can't open tablename
Description
While executing tmloadcf, a failure occurred while trying to open the specified tablename. One table is created and opened for each of the sections in the UBBCONFIG file.
Action
A subsequent system message will indicate the nature of the error. Correct the problem and re-execute the command.
See Also
tmloadcf(1)
882
ERROR: Can't write tablename
Description
While executing tmloadcf, a failure occurred while trying to write the specified tablename. One table is created, opened, and written for each of the sections in the UBBCONFIG file.
Action
A subsequent system message will indicate the nature of the error. Correct the problem and re-execute the command.
See Also
tmloadcf(1)
883
ERROR: tmloadcf cannot run on an active node
Description
While executing tmloadcf, the configuration file could not be loaded because the application is active on the current machine.
Action
If the application is active, shut down the application using tmshutdown, or make the change using the dynamic reconfiguration program tmconfig. If the application is not active, then another application is using the same IPC key. Choose another IPC key and re-execute the command.
See Also
tmconfig (1), tmloadcf(1), tmshutdown (1)
885
WARN: TUXCONFIG file not created: exiting
Description
While executing tmloadcf, the TUXCONFIG file did not exist. When asked if the TUXCONFIG file should be created, the administrator did not respond positively so the file was not created and loaded.
Action
No action required.
See Also
tmloadcf(1)
887
WARN: TUXCONFIG file not updated: exiting
Description
While executing tmloadcf, the TUXCONFIG file already exists. When asked if the TUXCONFIG file should be overwritten, the administrator did not respond positively so the file was not updated.
Action
No action required.
See Also
tmloadcf(1)
892
ERROR: Error processing configuration file
Description
While executing tmloadcf for an existing TUXCONFIG, an error occurred in reading the RESOURCES section of the configuration.
Action
If the TUXCONFIG VTOC is only being used to hold the TUXCONFIG tables (and not the TLOG or a TUXEDO/D database), then the first thing to try is to recreate a new TUXCONFIG. If the TUXCONFIG is a UNIX file, simply remove it. If it is stored on a raw disk, erase it by doing:
echo "" >$TUXCONFIG
If the error continues to happen, check for disk-type error conditions that might cause problems reading the file. Finally, contact your BEA TUXEDO system Technical Support.
See Also
tmloadcf(1)
893
WARN: Continuing processing - overwriting old TUXCONFIG file
Description
While executing tmloadcf for an existing TUXCONFIG, an error occurred in reading the RESOURCES section of the configuration but the configuration does not appear to be for the current release. The configuration will be overwritten.
Action
No action required.
See Also
tmloadcf(1)
850
WARN: Process id=val Assume started (network).
Description
While booting BEA TUXEDO system processes or servers, tmboot did not receive the status from a network call. The system issues this message to point out that it is not aware of the process status.
Action
No action is necessary, however, it is useful to note the status of system processes during this scenario.
See Also
tmboot(1)
851
INFO: Process id=val Assume started (pipe).
Description
While booting BEA TUXEDO system processes, tmboot receives an interrupt and the system issues this message to point out that it is not aware of the process status. Even though the boot process is interrupted (and perhaps aborted by the administrator), the local BEA TUXEDO system process currently being started may succeed or fail.
Action
No action is necessary, however, it is useful to note the status of system processes during this scenario.
See Also
tmboot(1)
 |
 |
 |