CMDTUX Messages 6300-6399
|
|
|
6301
ERROR: A TLOGDEVICE cannot be configured if the NO_XA option is set
Description
The identifier for TLOGDEVICE as specified in the MACHINES section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file.
See Also
ubbconfig(5) and tmloadcf (1)
6303
ERROR: TLOGOFFSET cannot be configured if the NO_XA option is set
Description
The identifier for TLOGOFFSET as specified in the MACHINES section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6305
ERROR: A TLOGNAME cannot be configured if the NO_XA option is set
Description
The identifier for TLOGNAME as specified in the MACHINES section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6307
ERROR: TLOGSIZE cannot be configured if the NO_XA option is set
Description
The identifier for TLOGSIZE as specified in the MACHINES section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6309
ERROR: TMSNAME cannot be configured if the NO_XA option is set
Description
The identifier for TMSNAME as specified in the GROUPS section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6311
ERROR: CLOSEINFO cannot be configured if the NO_XA option is set
Description
The identifier for CLOSEINFO as specified in the GROUPS section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6313
ERROR: OPENINFO cannot be configured if the NO_XA option is set
Description
The identifier for OPENINFO as specified in the GROUPS section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6315
ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.
Description
The SICACHEENTRIESMAX parameter in the SERVERS
section must be greater than or equal to 0 and less than 322768.
Action
Correct the value of SICACHEENTRIESMAX
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6320
ERROR: Can't tpadmcall buffer buf
Description
ud was unable to send a buffer to tpadmcall
to process. Additional information is printed indicating the cause
of the failure.
Action
Check the reason for the failure. No action required.
See Also
ud(1), TM_MIB(5)
6321
ERROR: AUTOTRAN specified in an application with the NO_XA option.
Description
The identifier for AUTOTRAN as specified in the SERVICES section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6322
ERROR: AUTOTRAN specified in an application with the NO_XA option.
Description
The identifier for AUTOTRAN as specified in the SERVICES section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6323
ERROR: Unlicensed System Binary
Description
A valid license file has not been installed in $TUXDIR/udataobj/lic.txt. This license file must have a section for Engine with the specific version number..
Action
Buy a license and install the provided file in udataobj/lic.txt.
6325
ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.
Description
The SICACHEENTRIESMAX parameter in the SERVERS
section must be greater than or equal to 0 and less than 322768.
Action
Correct the value of SICACHEENTRIESMAX
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6327
ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.
Description
The SICACHEENTRIESMAX parameter in the SERVERS
section must be greater than or equal to 0 and less than 322768.
Action
Correct the value of SICACHEENTRIESMAX
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6329
ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.
Description
The SICACHEENTRIESMAX parameter in the SERVERS
section must be greater than or equal to 0 and less than 322768.
Action
Correct the value of SICACHEENTRIESMAX
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6330
ERROR: AUTOTRAN specified in an application with the NO_XA option.
Description
The identifier for AUTOTRAN as specified in the SERVICES section
of the UBBCONFIG can not be set if the OPTIONS in
the RESOURCE section has the NO_XA option set.
Action
Correct the incompatible value of the UBBCONFIG file
and re-run tmloadcf(1).
See Also
ubbconfig(5) and tmloadcf (1)
6331
ERROR: Memory allocation failure.
Description
The system ran out of memory in the BRIDGE or BSBRIDGE
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
6332
ERROR: Error sending keepalive packet
Description
While sending the keepalive packet for BRIDGE communication, an error occurred.
Action
Check the network on the machine with the affected BRIDGE or BSBRIDGE.
 |
 |
 |