Skip navigation.

ISNAT Messages 1200-1299

  Previous Next

1200

INFO: .SysClientState: User usrname on LMID state change to state

Description

This message indicates that the specified client application changed to a new state. A complete listing of the current attributes of the client application is sent in the posted buffer.

Action

This is an informational message.

See Also

The EVENT_MIB(5) and TM_MIB(5) commands. For information about these commands, see the BEA TUXEDO Reference Manual.

1201

WARN: .SysClientSecurity: User usrname on LMID authentication failure

Description

This message indicates that the specified client application failed security validation when trying to join the application. A complete listing of the current attributes of the client application is sent in the posted buffer.

Action

Make sure that a hacker is not trying to gain access to your application data.

See Also

The EVENT_MIB(5) and TM_MIB(5) commands. For information about these commands, see the BEA TUXEDO Reference Manual.

1214

ERROR: Type switch uninitialization failure

Description

While processing a client application buffer, the buffer uninitialization function, _tmuninitbuf(), returned an error.

Action

Check the buffer type switch to see that it is correctly set up (that is, that the right uninitialization function is associated with the correct buffer type). If the buffer type is defined by the application, check the uninitialization function to see that it is coded correctly.

See Also

The buffer(3c) and typesw(5) commands. For information about these commands, see the BEA TUXEDO Reference Manual.

1222

ERROR: Expected numeric argument to -z option

Description

An invalid argument was passed to the IIOP Server Listener command-line option. The argument to the ISL command -z option needs to be numeric. This error causes the IIOP Server Listener not to be booted.

Action

Make sure the argument to the ISL command -z option is numeric.

See Also

The ISL command. For information about the ISL command, see Administration in the WebLogic Enterprise online documentation.

1223

ERROR: Expected numeric argument to -Z option

Description

An invalid argument was passed to the IIOP Server Listener command-line option. The argument to the ISL command -Z option needs to be numeric. This error causes the IIOP Server Listener not to be booted.

Action

Make sure the argument to the ISL command -Z option is numeric.

See Also

The ISL command. For information about the ISL command, see Administration in the WebLogic Enterprise online documentation.

1237

ERROR: tpnotify(TPACK) failed to reply, tperrno = tperrno

Description

The IIOP Server Handler sent an acknowledged unsolicited message to a client application. However, that client application never acknowledged the message.

Action

The network may have experienced an error, or the client application waiting for the notification may have been killed. The tperrno process may provide clues as to the cause of this failure. If neither of these events has occurred, contact BEA Technical Support.

1240

ERROR: Failed to read server table entry, tperrno = tperrno

Description

The IIOP Server Listener was rebooting after a failure and could not read the server table.

Action

The Bulletin Board may be corrupted. The tperrno process may provide clues as to the cause of this failure. Contact BEA Technical Support.

1241

ERROR: Sending of reply to tpbroadcast() or tpnotify() call to client failed

Description

The IIOP Server Handler received an acknowledgment from a client application but was unable to forward the acknowledgment of the tpnotify to the sender.

Action

The originator of the tpnotify may have been killed. If the originator of the notify has not been killed, contact BEA Technical Support.

1242

ERROR: Bad Internet type of listening address provided: address

Description

The address is not a valid Internet address.

Action

Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change address to comply with the known formats. If you believe that your address is in the proper format, contact BEA Technical Support.

1249

ERROR: -H and -n have different length of network address

Description

If you are using an external address, that address must have the same format as the -n option.

Action

Change the -H option to have the same format as the -n option.

1254

ERROR: Bad conversational sequence number

Description

Conversations are sequenced to provide protection. One of the conversational messages arrived out of order. The conversation has been disconnected, and if a transaction was active, it has been set to the ABORTONLY state.

Action

Look at the user log to determine whether the BRIDGE has given up sending any messages to the message queue for the IIOP Server Handler. If it has given up, the operating system may need to be tuned to handle a high volume of messages properly. This problem may also be alleviated by using compression. This error may also occur when the BRIDGE is failing over to a new network link or failing back to a high priority link.

1277

ERROR: Memory allocation failure

Description

An attempt to allocate memory dynamically from the operating system using malloc() failed while the IIOP Server Listener or the IIOP Server Handler was being initialized.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine.

1278

ERROR: Address conversion error

Description

The IIOP Server Handler had a problem converting an address from a binary format to a text format.

Action

If this error happens consistently, contact BEA Technical Support.

1279

ERROR: descriptor allocation error

Description

The IIOP Server Handler was unable to allocate a network resource for the listening end point.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine.

1280

ERROR: Could not initialize network (error)

Description

The IIOP Server Handler or IIOP Server Listener could not initialize its network.

Action

Ensure that the network is viable on the machine. If the network is viable, contact BEA Technical Support.

1281

ERROR: Could not initialize global information (error)

Description

The IIOP Server Handler or IIOP Server Listener could not initialize its network.

Action

Ensure that the network is viable on the machine. If the network is viable, contact BEA Technical Support.

1283

ERROR: Network error (error) servicing network event

Description

The IIOP Server Listener encountered a severe error while handling network events.

Action

Ensure that the network is viable on the machine. If the network is viable, contact BEA Technical Support.

1284

WARN: Failed to allocate a network resource (error)

Description

The IIOP Server Handler or IIOP Server Listener could not allocate a network descriptor for a remote connection.

Action

Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Either reduce the memory usage on the machine or increase the amount of physical memory on the machine.

1286

ERROR: -K argument must be client, handler, both, or none

Description

The -K option for the ISL command requires an argument of client application, handler, both, or none.

Action

Ensure that the -K option of the ISL command is client application, handler, both, or none. Check your spelling.

1287

WARN: Forced shutdown of client; user name 'name'; client name 'name'; client address 'xxx.xxx.xxx.xxx'

Description

This error may result from an IIOP Server Handler being shut down when client applications are connected, a client application connection has timed out, the IIOP Server Handler was unable to send a network message to the client application, or an incorrect APP_PW (application password) was rejected during tpinit().

Action

If APP_PW is turned on, see your UBBCONFIG file and ubbconfig(5), and then check with your system administrator to verify that you are using the correct application password for your WLE application.

1288

WARN: setsockopt() for SO_KEEPALIVE failed

Description

The KEEPALIVE handler-side networking option was configured for a IIOP Server Listener/Handler pair, but could not be enabled.

Action

This error is ignored and IIOP Server Handler processing continues normally. However, network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client application timeout (ISL command -T option) to reclaim resources associated with dead network connections.

See Also

The ISL command. For information about the ISL command, see the Administration Guide.

1289

WARN: KEEPALIVE option requested but not available on this platform

Description

The KEEPALIVE handler-side networking option is configured for a IIOP Server Listener/Handler pair, but cannot be enabled because it is not available on this platform.

Action

This error is ignored and IIOP Server Handler processing continues normally. However network errors may not be reported, or may be reported less promptly. Consider enabling the inactive client application timeout (ISL command -T option) to reclaim resources associated with dead network connections.

See Also

The ISL command. For information about the ISL command, see the Administration Guide.

1290

ERROR: Can't parse the address address

Description

While the networking software was attempting to resolve address, an error occurred.

Action

Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server.

1291

ERROR: Can't resolve host name in address address

Description

While the networking software was attempting to resolve the host name portion of address, an error occurred.

Action

Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server.

1292

ERROR: Unknown address type: address

Description

The given address does not correspond to a type known by the system.

Action

The WLE software understands several types of address format. Addresses that start with // must be Internet addresses. Other formats may or may not be understood by the WLE software.

1293

ERROR: Can't resolve port number in address address

Description

While the networking software was attempting to resolve the port number portion of address, an error occurred.

Action

Any address that starts with // must be a valid Internet address. The following formats are recognized by the system: //hostname:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server.

1294

ERROR: Can't convert the address address to binary format

Description

While the WLE software was trying to convert an address to an internal binary representation, an error occurred.

Action

Contact BEA Technical Support.

1295

ERROR: Illegal character in the address address

Description

There is an illegal character in the port portion of address. Ports may only have alphanumeric characters.

Action

Remove the illegal character from the port portion of the address.

1296

ERROR: Missing port number in the address address

Description

The address must have a port number portion.

Action

Supply a port number portion in the given address. Otherwise, the IIOP Server Listener or IIOP Server Handler cannot determine its listening end point properly.

1297

ERROR: Port number cant be bigger than value in the address address

Description

The port number portion of address is larger than the largest allowable port number of value.

Action

Change the port number to be within the specified range.

 

Skip footer navigation  Back to Top Previous Next