Q Messages 1500-1599
|
|
|
1500
ERROR: Heuristic or one-phase commit - out of queue space
Description
While executing the qcommittrans command to heuristically commit a transaction, qmadmin was unable to record the heuristic commit because the queue space had no more room for messages. If the IPC resources for the queue space are removed before the transaction manager asks about the status of the heuristically completed transaction, the status will be lost.
This can also occur if the transaction manger does a one-phase commit. If the one-phase commit is interrupted before completion, the transaction may be inconsistent.
Action
No action required.
See Also
qmadmin(1)
1501
ERROR: Heuristic rollback - out of queue space
Description
While executing the qrollbacktrans command to heuristically rollback a transaction, qmadmin was unable to record the heuristic rollback because the queue space had no more room for messages. If the IPC resources for the queue space are removed before the transaction manager asks about the status of the heuristically completed transaction, the status will be lost.
Action
No action required.
See Also
qmadmin(1)
1507
ERROR: Must specify queue space name
Description
While executing the qspacechange command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
Action
Re-enter the qspacechange command with the correct queue space name.
See Also
qmadmin(1)
1508
ERROR: Queue space name length must be less than len characters
Description
While executing the qspacechange command, the queue space name was too long (that is, len characters or more).
Action
Re-enter the command with a queue space name that is 15 characters or less in length.
See Also
qmadmin(1)
1518
ERROR: Error queue name length must be less than len characters
Description
While executing the qspacechange command, the error queue name was too long (that is, len characters or more).
Action
Re-enter the command with an error queue name that is 15 characters or less in length.
See Also
qmadmin(1)
1522
ERROR: Queue space change failed
Description
While executing the qspacechange command, qmadmin failed to change the specified queue space parameters. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
Action
Re-enter the command when the problem has been resolved.
See Also
qmadmin(1)
1525
ERROR: List queue space - invalid parameter
Description
While executing the qspacelist command, an invalid parameter was specified. The following are invalid: the device is not specified; the queue space name is not specified or is greater than 15 characters in length.
Action
Re-enter the command with the correct parameters.
See Also
qmadmin(1)
1526
ERROR: Queue space change - invalid parameter
Description
While executing the qspacechange command, an invalid parameter was specified. The following are invalid: the IPC key is less than or equal to 0; the number of queues, transactions, processes, or messages is less than or equal to 0; the configuration device is not specified; or the queue space name is not specified or is greater than 15 characters in length. or the extent size is less than or equal to 0.
Action
Re-enter the command with the correct parameters.
See Also
qmadmin(1)
1527
ERROR: Queue space change - cannot lock queue space queue_space_name
Description
While executing the qspacechange command, qmadmin failed to lock the QMCONFIG device for exclusive update.
Action
Check the userlog for further information about the process that has the configuration locked. Re-enter the command after the configuration has been unlocked.
See Also
qmadmin(1)
1528
ERROR: Queue space create - Memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed while allocating a buffer based on the specified blocking factor.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Reduce the blocking factor specified when creating the queue space.
See Also
qmadmin(1)
1529
ERROR: Add extent - Memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed while allocating a buffer based on the specified blocking factor.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Reduce the blocking factor specified when changing the queue space.
See Also
qmadmin(1)
1563
ERROR: QMCONFIG must be an absolute pathname
Description
The value of QMCONFIG, the device containing the queue space, as specified on the qmadmin command line or in the shell environment is not an absolute pathname, meaning it does not begin with a /.
Action
Specify a full pathname for the QMCONFIG environment variable or qmadmin command line argument.
See Also
qmadmin(1)
1564
ERROR: Device name must be an absolute pathname
Description
While executing the crdl command, the device name specified is not an absolute pathname, meaning it does not begin with a /.
Action
Re-enter the command with an absolute pathname for the device name.
See Also
qmadmin(1)
1565
ERROR: Device name must be an absolute pathname
Description
While executing the chdl command, the device name specified is not an absolute pathname, meaning it does not begin with a /.
Action
Re-enter the command with an absolute pathname for the device name.
See Also
qmadmin(1)
1566
ERROR: Must specify queue space name
Description
While executing the ipcrm command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
Action
Re-enter the ipcrm command with the correct queue space name.
See Also
qmadmin(1)
1567
ERROR: Queue space name length must be less than len characters
Description
While executing the ipcrm command, the queue space name was too long (that is, len characters or more).
Action
Re-enter the command with a queue space name that is 15 characters or less in length.
See Also
qmadmin(1)
1568
ERROR: Must specify queue space name
Description
While executing the ipcs command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
Action
Re-enter the ipcs command with the correct queue space name.
See Also
qmadmin(1)
1569
ERROR: Queue space name length must be less than len characters
Description
While executing the ipcs command, the queue space name was too long (that is, len characters or more).
Action
Re-enter the command with a queue space name that is 15 characters or less in length.
See Also
qmadmin(1)
1570
ERROR: Must specify queue space name
Description
While executing the qopen command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
Action
Re-enter the qopen command with the correct queue space name.
See Also
qmadmin(1)
1571
ERROR: Queue space name length must be less than len characters
Description
While executing the qopen command, the queue space name was too long (that is, len characters or more).
Action
Re-enter the command with a queue space name that is 15 characters or less in length.
See Also
qmadmin(1)
1572
ERROR: Must specify queue space name
Description
While executing the qspacedestroy command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
Action
Re-enter the qspacedestroy command with the correct queue space name.
See Also
qmadmin(1)
1573
ERROR: Queue space name length must be less than len characters
Description
While executing the qspacedestroy command, the queue space name was too long (that is, len characters or more).
Action
Re-enter the command with a queue space name that is 15 characters or less in length.
See Also
qmadmin(1)
1574
ERROR: Invalid queue name
Description
While executing the qset command, an invalid queue name was specified.
Action
Use the qinfo command to get a list of the existing queue names. Re-execute the command with a valid queue name.
See Also
qmadmin(1)
1577
ERROR: xa_open() - failed to get enough semaphores
Description
When opening (warm starting) a queue space, there were not enough system semaphores available.
Action
The qsize command can be used to compute the number of semaphores needed. Either shut down other applications that are using semaphores, or increase the operating system semaphore parameters.
See Also
qmadmin(1)
1578
ERROR: Destroy queue - queue messages involved in one or more transactions
Description
The qdestroy, command was executed while transactions are outstanding for messages on that queue (either being enqueued or dequeued).
Action
Re-execute the command again. It may be necessary to shut down any processes accessing the queue space.
See Also
qmadmin(1)
1579
INFO: Queue list - no messages queue name
Description
While executing the qlist command for queue name, no messages were found on the queue.
Action
No action required.
See Also
qmadmin(1)
1580
ERROR: Queue space change - ipckey is already used -- choose another one or check existing semaphores
Description
While executing the qspacechange command, an IPC key was specified for which a semaphore already exists. This probably means that another application is using the IPC key.
Action
Choose another IPC key and re-execute the command.
See Also
qmadmin(1)
1582
ERROR: Change queue - invalid parameter
Description
While executing the qchange command, an invalid parameter was specified. The following are invalid: an invalid out-of-order value; retries or delay time less than 0; the queue space name is not specified or greater than 15 characters in length; the upper threshold less than or equal to 0 or less than the lower threshold value; or an invalid threshold type or a threshold type of '%' with a upper threshold value greater than 100.
Action
Re-enter the command with the correct parameters.
See Also
qmadmin(1)
1585
ERROR: Queue change failed for queue name
Description
While executing the qchange command, qmadmin failed to change the specified queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
Action
Re-enter the command when the problem has been resolved.
See Also
qmadmin(1)
 |
 |
 |