CMDFML Messages 200-299
|
|
|
201
ERROR: program: TUXDIR environment variable must be set
Description
viewc was executed without the TUXDIR environment variable set and exported.
Action
Set and export the TUXDIR environment variable and re-execute the command.
See Also
viewc(1)
204
ERROR: unable to open viewfile filename
Description
viewc failed to open the specified input view file, filename, for reading.
Action
Check that the input file exists and has read permission.
See Also
viewc(1)
210
ERROR: unable to open tmp file filename
Description
viewc failed to create and open the specified temporary output file, filename, for writing.
Action
Check that the directory for the output file exists and has write and execute permissions set correctly, and that the file does not already exist or has write permissions set correctly.
See Also
viewc(1)
211
ERROR: program: unable to generate view object file
Description
viewc failed to compile the internally generated program that computes the offsets for the view members.
Action
Normally, the compiler warnings and errors are printed to the standard error output for the viewc command. Possible errors might be in executing the compiler with invalid options, with insufficient memory or disk space, etc. Correct the problems indicated and re-execute the command.
See Also
viewc(1)
212
ERROR: program: unable to execute internal program
Description
viewc failed to execute the internally generated program that computes the offsets for the view members.
Action
Errors may be printed to the standard error output, or in the case of system resource limitations, to the console. Possible errors might be insufficient memory or disk space, etc. Correct the problems indicated and re-execute the command.
See Also
viewc(1)
213
ERROR: program: internal program error
Description
viewc failed to read the output of the internally generated program that computes the offsets for the view members.
Action
Try executing the command again. Contact BEA Customer Support.
See Also
viewc(1)
214
ERROR: program: internal program error
Description
viewc failed to read the output of the internally generated program that computes the offsets for the view members.
Action
Try executing the program again. Contact BEA Customer Support.
See Also
viewc(1)
215
ERROR: program: internal program error
Description
viewc failed to read the output of the internally generated program that computes the offsets for the view members.
Action
Try executing the program again. Contact BEA Customer Support.
See Also
viewc(1)
216
ERROR: program: internal program error
Description
viewc failed to read the output of the internally generated program that computes the offsets for the view members.
Action
Try executing the program again. Contact BEA Customer Support.
See Also
viewc(1)
217
ERROR: unable to open output file filename
Description
viewc failed to create and open the specified output file, filename, for writing.
Action
Check that the directory for the output file exists and has write and execute permissions set correctly, and that the file does not already exist or has write permissions set correctly.
See Also
viewc(1)
221
ERROR: program: unable to open input file filename
Description
program failed to open the specified view input file, filename, for reading.
Action
Check that the input file exists and has read permission.
See Also
viewdis(1)
222
ERROR: program: filename is not a viewfile
Description
The input file name, filename, specified for viewdis is not a compiled view file.
Action
Make sure the input file is a compiled view file (suffixed with .V) for the local machine and re-execute the command.
See Also
viewc(1), viewdis(1)
223
ERROR: program: filename is an out-of-date viewfile: can't disassemble
Description
The input file name, filename, specified for viewdis is not a valid compiled view file for the current version of the software.
Action
Make sure the input file is a compiled view file (suffixed with .V) for the local machine (for the current version of the software) and re-execute the command.
See Also
viewc(1), viewdis(1)
224
ERROR: program: filename is an incomplete viewfile: can't disassemble
Description
The input file name, filename, specified for viewdis is not a complete view file (for example, the file may have been truncated).
Action
Make sure the input file is a compiled view file (suffixed with .V) for the local machine and re-execute the command.
See Also
viewdis(1)
225
ERROR: val: view structure too large, viewc maxsize 64K, viewc32 maxsize 2097152K
Description
While running viewc or viewc32, the size
of a VIEW or VIEW32 structure exceeded the maximum size allowed.
Action
Modify the view definition file and re-run the operation. For a VIEW structure, consider using a VIEW32 structure, which allows for a much larger structure size.
See Also
viewc(1), viewc32(1)
226
ERROR: val: view structure too large, viewc maxsize 64K, viewc32 maxsize 2097152K
Description
While running viewc or viewc32, the size
of a VIEW or VIEW32 structure exceeded the maximum size allowed.
Action
Modify the view definition file and re-run the operation. For a VIEW structure, consider using a VIEW32 structure, which allows for a much larger structure size.
See Also
viewc(1), viewc32(1)
229
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
230
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
231
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
232
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
233
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
234
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
235
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
236
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
237
ERROR: path: target path can not be greater than 64 characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 64 characters.
See Also
viewc(1), viewc32(1)
239
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
240
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
241
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
242
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
243
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
244
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
245
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
246
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
247
ERROR: path: target path can not be greater than numchar characters
Description
The path path is too long to fit in the allocated buffer.
Action
You must use a path name that is no more than 256 characters.
See Also
viewc(1), viewc32(1)
 |
 |
 |