LIBGWT Messages 1300-1399
1300
ERROR: Unable to decrypt challange from val
Description
The gateway failed to decrypt the challenge value during initial protocol exchange for APP_PW security.
Action
This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO System technical support with the exact error message.
1301
ERROR: Unable to intialize administration key for domain val
Description
The gateway is encountering an error initializing the DM_PW
encryption key during the initial protocol exchange.
Action
Check the preceding ULOG message(s) for information on why the DM_PW
encryption calls are failing.
1302
ERROR: Unable to decrypt challange from val
Description
The gateway is encountering an error decrypting the DM_PW
challenge key during the initial protocol exchange.
Action
This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO System technical support with the exact error message.
1303
ERROR: Network error occurred during connection establishment
Description
The gateway failed to connect to a remote domain.
Action
Check the NWADDR
parameters in the local and remote dmconfig files. Also check that the remote machine is running and the remote gateway is running. Check network connectivity between the two machines.
1304
WARN: No more remote domain address for remote domain name
Description
The gateway was unable to establish a connection to the remote domain using the NWADDR
in the DM_TDOMAIN
entry (or list of entries) of the dmconfig file. Since multiple entries may be specified, the gateway tries each entry until a connection is establish. In this situation, all entries were attempted and none of them succeeded.
Action
Check the DM_TDOMAIN
entry (or list of entries) in the dmconfig file. Also check the corresponding remote domain that it is running and the the gateway is listening for incoming connections.
1305
INFO: A connection attempt has failed for val, trying new address val
Description
The gateway was unable to establish a connection using the indicated entry in the DM_TDOMAIN
section. Multiple entries are configured, and the gateway will now attempt to try to connect using the next entry.
Action
To check why the first entry was unsuccessful, check the corresponding DM_TDOMAIN
entry in the dmconfig file. Also check the associated remote domain to make sure it is running. Note that if multiple entries are being used for network-level failover, this may be the desired behavior.
1306
ERROR: Can not allocate network descriptor
Description
The gateway has been notified that the network connection attempt has failed. While processing the failure, it detects that there are multiple DM_TDOMAIN
entries. During the setup of the next entry, the gateway attempts to allocate a network descriptor and the allocation has failed.
Action
Make sure the operating system parameters are set correctly for the amount of memoryon the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1307
ERROR: System encryption failed for domain val
Description
During initial protocol exchange between gateways, the gateway fails to encrypt the security ticket.
Action
This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO system Technical Support with the exact error message.
1308
ERROR: System encryption failed for domain val
Description
During initial protocol exchange between gateways, the gateway fails to encrypt the security ticket.
Action
This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO system Technical Support with the exact error message.
1309
ERROR: Memory allocation failure for encryption
Description
An attempt to dynamically allocate memory from the operating system failed while encrypting an outbound message.
Action
Make sure the operating system parameters are set correctly for the amount of memoryon the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1310
ERROR: Memory allocation failure for encryption
Description
An attempt to dynamically allocate memory from the operating system failed while encrypting an outbound transactional message.
Action
Make sure the operating system parameters are set correctly for the amount of memoryon the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1311
ERROR: Could not allocate a domain header
Description
An attempt to dynamically allocate memory from the operating system failed while trying to add the domains transaction header to an outbound message.
Action
Make sure the operating system parameters are set correctly for the amount of memoryon the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1312
ERROR: Unable to remove domains header
Description
The gateway is unable to strip the domains transaction header from an incoming mesages.
Action
This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO system Technical Support with the exact error message.
1313
ERROR: Bad message from val. Closing file descriptor
Description
The gateway received a poorly formatted message from the specified remote domain and is unable to recognize it.
Action
Check the ULOG of the remote domain for further diagnosis.
1314
ERROR: Unable to create initial action for remote domain
Description
An attempt to dynamically allocate memory from the operating system failed during the initial gateway protocol exchange.
Action
Make sure the operating system parameters are set correctly for the amount of memoryon the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1316
ERROR: Memory allocation failure for encryption
Description
An attempt to dynamically allocate memory from the operating system failed while encrypting an outbound message.
Action
Make sure the operating system parameters are set correctly for the amount of memoryon the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1317
ERROR: Network error occurred during connection establishment
Description
The gateway is using one of the alternate DM_TDOMAIN
entries and is unable to initiate the connection.
Action
Check the DM_TDOMAIN
entry to make sure it has a valid network address. Also check that the remote domain is running and that the gateway is listening for incoming connections.
1318
ERROR: Local security type (val) does not match security type (val) of remote domain (domainid=val)
Description
In order for two domains to communicate they must both have the same SECURITY
types set in their dmconfig
files. If the security levels do not match the connection will be refused.
Action
Change the SECURITY
value on one or both of the dmconfig
files so that they match.
1354
INFO: Retrying domain (domainid=<domainid>) every retry_interval seconds
Description
The initial connection attempt to the remote domain has failed. The gateway is now retrying the connection to the remote domain periodically, as specified by RETRY_INTERVAL
(default: 60 sec). The retry occurs only when the CONNECTION_POLICY
is ON_STARTUP
.
The retry interval is rounded up to be a multiple of SCANUNIT
(as specified in the ubbconfig
file).
Action
No action required.
1360
ERROR: Cannot allocate nbytes bytes for maxpendingbytes information
Description
An attempt to dynamically allocate memory from the operating system using
malloc
or realloc
failed while attempting to allocate
nbytes bytes.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. If necessary, shutdown and restart the GWTDOMAIN process that reported this error.
1361
INFO: Total pending bytes for all domains has dropped to nbytes, under half of request limit of limit; ndropped messages dropped
Description
The number of bytes waiting to be sent to other domains has dropped to well below the system limit. Messages to other domains are no longer being dropped and are no longer close to being dropped.
Action
No action required.
1362
INFO: Total pending bytes for all domains has dropped to nbytes, under half of reply limit of limit; ndropped messages dropped
Description
The number of bytes waiting to be sent to other domains for reply and TMS messages has dropped to well below the system limit on such bytes. Messages to other domains are no longer being dropped and are no longer close to being dropped.
Action
No action required.
1363
INFO: Total pending bytes for all domains has dropped to nbytes, under half of TMS limit of limit; ndropped messages dropped
Description
The number of bytes waiting to be sent to other domains for TMS messages has dropped to well below the system limit on such bytes. Messages to other domains are no longer being dropped and are no longer close to being dropped.
Action
No action required.
1364
INFO: Total pending bytes for domain domname has dropped to nbytes, under half of request limit of limit; ndropped messages dropped
Description
The number of bytes waiting to be sent to domain domname has dropped to well below the system limit on such bytes. Messages to other domains are no longer being dropped and are no longer close to being dropped.
Action
No action required.
1365
INFO: Total pending bytes for domain domname has dropped to nbytes, under half of reply limit of limit; ndropped messages dropped
Description
The number of bytes waiting to be sent to domain domname for reply and TMS messages has dropped to well below the system limit on such bytes. Messages to other domains are no longer being dropped and are no longer close to being dropped.
Action
No action required.
1366
INFO: Total pending bytes for domain domname has dropped to nbytes, under half of TMS limit of limit; ndropped messages dropped
Description
The number of bytes waiting to be sent to domain domname for TMS messages has dropped to well below the system limit on such bytes. Messages to other domains are no longer being dropped and are no longer close to being dropped.
Action
No action required.
1367
ERROR: Cannot open GW_MAXPENDINGBYTES_FILE "filename" (errno=errno)
Description
The GWTDOMAIN process cannot open file filename indicated by the GW_MAXPENDINGBYTES_FILE environment variable. As a result, no restrictions on the number of outstanding bytes waiting to be sent will be enforced in the GWTDOMAIN process.
Action
The domain gateway will continue to operate normally, but its process size may grow if a large volume of pending messages accumulates in process memory. If it is important to avoid possible GWTDOMAIN process size growth, then shut down the GWTDOMAIN process, and either fix the problem with filename or fix the value of the GW_MAXPENDINGBYTES_FILE environment variable. Once this is done, reboot the GWTDOMAIN process.
1368
ERROR: Cannot allocate nbytes bytes for maxpendingbytes information
Description
An attempt to dynamically allocate memory from the operating system using
malloc
or realloc
failed while attempting to allocate
nbytes bytes.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. If necessary, shutdown and restart the GWTDOMAIN process that reported this error.
1369
WARN: Remote domain name in line linenum of filename is longer than nchar characters
Description
The GWTDOMAIN process encountered an excessively long remote domain name while parsing the GW_MAXPENDINGBYTES_FILE file filename. This line will be ignored.
Action
The domain gateway will continue to operate normally. No action is required unless the administrator determines that the name in line linenum was misspelled and also determines that it is critical that the maximum pending bytes feature be enabled for that domain. If this is the case, then shut down the GWTDOMAIN process, fix the problem in line linenum, and reboot the GWTDOMAIN process.
1370
WARN: Remote domain domname in line linenum of filename is not a configured remote domain name. Default values will be used for any domain dynamically configured with this name.
Description
The GWTDOMAIN process encountered an unknown remote domain name while parsing the GW_MAXPENDINGBYTES_FILE file filename. This line will be ignored.
Action
The domain gateway will continue to operate normally. No action is required unless the administrator determines that the name in line linenum was misspelled and also determines that it is critical that the maximum pending bytes feature be enabled for that domain using non-default values. If this is the case, then shut down the GWTDOMAIN process, fix the problem in line linenum, and reboot the GWTDOMAIN process.
1371
WARN: Value for pending request bytes in line linenum of filename is outside of allowed range of minpending to maxpending or is non-numeric. This line will be ignored.
Description
The GWTDOMAIN process encountered an invalid pending request bytes limit while parsing the GW_MAXPENDINGBYTES_FILE file filename. This line will be ignored.
Action
The domain gateway will continue to operate normally. No action is required unless the administrator determines that it is critical to fix the incorrect value in line linenum. If this is the case, then shut down the GWTDOMAIN process, fix the problem in line linenum, and reboot the GWTDOMAIN process.
1372
WARN: Value for pending request+reply bytes in line linenum of filename is outside of allowed range of minpending to maxpending or is non-numeric; ignoring this line
Description
The GWTDOMAIN process encountered an invalid pending request+reply bytes limit while parsing the GW_MAXPENDINGBYTES_FILE file filename. This line will be ignored.
Action
The domain gateway will continue to operate normally. No action is required unless the administrator determines that it is critical to fix the incorrect value in line linenum. If this is the case, then shut down the GWTDOMAIN process, fix the problem in line linenum, and reboot the GWTDOMAIN process.
1373
WARN: Value npending for pending request+reply bytes in line linenum of filename is less than value for pending request bytes; resetting to minnpending
Description
The GWTDOMAIN process encountered a request+reply bytes limit less than the corresponding request bytes limit while parsing the GW_MAXPENDINGBYTES_FILE file filename. This value has been reset as indicated.
Action
The domain gateway will continue to operate normally. No action is required unless the administrator determines that it is critical to fix the incorrect value in line linenum. If this is the case, then shut down the GWTDOMAIN process, fix the problem in line linenum, and reboot the GWTDOMAIN process.
1374
WARN: Value for pending request+reply+tms bytes in line linenum of filename is outside of allowed range of minrange to maxrange or is non-numeric; ignoring this line
Description
The GWTDOMAIN process encountered an invalid pending request+reply+tms bytes limit while parsing the GW_MAXPENDINGBYTES_FILE file filename. This line will be ignored.
Action
The domain gateway will continue to operate normally. No action is required unless the administrator determines that it is critical to fix the incorrect value in line linenum. If this is the case, then shut down the GWTDOMAIN process, fix the problem in line linenum, and reboot the GWTDOMAIN process.
1375
WARN: Value npending for pending request+reply+tms bytes in line linenum of filename is less than 100000 + pending request+reply bytes; resetting to min_npending
Description
The GWTDOMAIN process encountered a request+reply+tms bytes limit less than the corresponding 100000+request+reply bytes limit while parsing the GW_MAXPENDINGBYTES_FILE file filename. This value has been reset as indicated.
Action
The domain gateway will continue to operate normally. No action is required unless the administrator determines that it is critical to fix the incorrect value in line linenum. If this is the case, then shut down the GWTDOMAIN process, fix the problem in line linenum, and reboot the GWTDOMAIN process.
1377
WARN: Dropping message to domain domname; nbytes total pending bytes exceeds total request limit of limit
Description
The domain gateway has dropped a message to domain domname because the corresponding limit has been exceeded.
Action
Monitor the system to determine if there is a network problem or if network traffic is much higher than usual, and take any corrective measures required.
1378
WARN: Dropping message to domain domname; nbytes total pending bytes exceeds total reply limit of limit
Description
The domain gateway has dropped a message to domain domname because the corresponding limit has been exceeded.
Action
Monitor the system to determine if there is a network problem or if network traffic is much higher than usual, and take any corrective measures required.
1379
WARN: Dropping message to domain domname; nbytes total pending bytes exceeds total TMS limit of limit
Description
The domain gateway has dropped a message to domain domname because the corresponding limit has been exceeded.
Action
Monitor the system to determine if there is a network problem or if network traffic is much higher than usual, and take any corrective measures required.
1380
WARN: Dropping message to domain domname; nbytes pending bytes exceeds request limit of limit
Description
The domain gateway has dropped a message to domain domname because the corresponding limit has been exceeded.
Action
Monitor the system to determine if there is a network problem or if network traffic is much higher than usual, and take any corrective measures required.
1381
WARN: Dropping message to domain domname; nbytes pending bytes exceeds reply limit of limit
Description
The domain gateway has dropped a message to domain domname because the corresponding limit has been exceeded.
Action
Monitor the system to determine if there is a network problem or if network traffic is much higher than usual, and take any corrective measures required.
1382
WARN: Dropping message to domain domname; nbytes pending bytes exceeds TMS limit of limit
Description
The domain gateway has dropped a message to domain domname because the corresponding limit has been exceeded.
Action
Monitor the system to determine if there is a network problem or if network traffic is much higher than usual, and take any corrective measures required.