LIBORB Messages 100-199
|
|
|
100
ERROR: Bad Type Id TypeId.
Description
The object reference is invalid or corrupted.
Exception None.
Action
Re-create the repository or recover from a previous version.
103
ERROR: Transport error `TransportError'.
Description
A transport error has occurred.
Exception COMM_FAILURE
Action
Verify the operation of the transport.
104
ERROR: Specified arguments do not match defined arguments.
Description
The arguments for the operation invocation do not match the arguments defined for the operation (that is, too many arguments, too few arguments, inconsistent data type or direction, and so on).
Exception BAD_PARAM
Action
Verify that the specified arguments match those defined for the operation.
105
ERROR: Specified method not found on implementation skeleton.
Description
The specified method could not be called from the implementation invoke routine because the method was not found.
Exception NO_IMPLEMENT
Action
Verify that the method is defined for the implementation, and that the correct servant is used for invocation. Regenerate the implementation skeleton if necessary.
108
ERROR: Unknown node `Node' specified.
Description
An unregistered node name was specified.
Exception COMM_FAILURE
Action
Make sure the node specified is registered.
109
ERROR: Dynamic load is not supported on this platform.
Description
The platform does not support dynamic loading.
Action
Contact BEA Customer Support.
110
ERROR: The shared library `Name' could could not be dynamically loaded.
Description
The ImagePath WLE registry parameter for a WLE loadable component or subsystem could not be dynamically loaded.
Exception UNKNOWN
Action
Verify that the dynamic library can be loaded. Check privileges, system constraints, and so on.
111
ERROR: The specified server is already registered.
Description
The server failed to connect because the requested socket was already in use.
Action
Restart the server, or contact BEA Customer Support.
112
ERROR: Bad dynamic library specification.
Description
The name of the specified dynamic library is invalid.
Exception INV_IDENT
Action
Verify the name and path for the dynamic library.
113
ERROR: The underlying transport could not be initialized.
Description
The underlying transport (for example, TCP/IP) could not be initialized.
Exception None.
Action
Verify the operation of the transport. Make sure that the appropriate software is installed and that it is running.
114
ERROR: An internal software error occurred.
Description
An internal software error occurred. The operation was not completed.
Exception INTERNAL
Action
Contact BEA Customer Support.
115
ERROR: Bad object name `ObjectName'.
Description
The specified object name is not a valid WLE object name (for example, illegal characters, bad format, too many characters, and so on).
Exception INV_IDENT
Action
Specify a valid object name.
116
ERROR: Transport handle is invalid.
Description
An unexpected transport error occurred.
Action
Contact BEA Customer Support.
117
ERROR: Transport level communication failed.
Description
Communication to a server has failed. This failure, in many cases, is due to a timeout while a method is being completed.
Exception COMM_FAILURE
Action
Check the server you are attempting to communicate with. In addition, verify the operation of the network. If the method is long running, try calling it asynchronously.
118
ERROR: The requested server was not found or is not accessible on the network.
Description
The WLE software could not locate the requested server on the network.
Exception UNKNOWN
Action
Verify that the server is running and is available on the network transport.
119
ERROR: Exceeded marshalling buffer.
Description
The marshalling buffer was exceeded.
Exception INTERNAL
Action
Contact BEA Customer Support.
120
ERROR: The transport message was not properly identified.
Description
The message received on the transport was not identified as a WLE message.
Exception INTERNAL
Action
Contact BEA Customer Support.
121
ERROR: Invalid argument.
Description
This message occurs when an invalid argument is specified.
Exception INV_OBJREF
Action
Verify the arguments passed in.
122
ERROR: Specified result does not match defined result.
Description
The result for the method invocation does not match the result defined for the method.
Exception BAD_PARAM
Action
Verify that the specified result matches that defined for the operation.
123
ERROR: String length is greater than the bound.
Description
The length of the string exceeds the bound specified for the type in the OMG IDL statements.
Exception BAD_PARAM
Action
Verify the length. Either change the bound in the type definition in the OMG IDL statements or set the string to be of a length less than or equal to the bound.
124
ERROR: An invalid type was specified for an ANY argument.
Description
An argument of type ANY was specified with an invalid type field.
Exception MARSHAL
Action
Verify the ANY argument. Make sure that the argument type is a valid typecode.
125
ERROR: Specified number of arguments do not match defined number of arguments.
Description
The number of arguments for the invocation does not match the number of arguments defined for the operation.
Exception BAD_PARAM
Action
Verify that the number of specified arguments matches those defined for the operation.
126
ERROR: Specified argument name `ArgumentName' does not match defined argument name.
Description
The name of the argument does not match the name of the argument defined for the operation.
Exception BAD_PARAM
Action
Verify that the names of the specified arguments match those defined for the operation.
127
ERROR: Specified argument type does not match defined argument type for `ArgumentName'.
Description
The type of the argument does not match the type of the argument defined for the operation.
Exception BAD_PARAM
Action
Verify that the type of the specified argument matches that defined for the operation.
128
ERROR: TypeCode ID not found.
Description
The TypeCode was not found in any of the TypeCode lookup routines. Without the TypeCode, the data cannot be marshaled or unmarshaled.
Exception BAD_TYPECODE
Action
Verify that the id is from a type or an exception known to the client or the server. If you are using DII instead of stubs, ensure that the TypeCode lookup routine has been registered.
129
ERROR: Transport level send timeout.
Description
Communication between server and client has failed. This failure is due to a timeout that occurs while the client is attempting to send an invoke request or the server is attempting to send a reply to an invoked request.
Exception COMM_FAILURE
Action
Check the client or server with which you are attempting to communicate. In addition, verify the operation of the network. If the method is long running, try invoking the method asynchronously.
130
ERROR: The object is constrained to be local.
Description
An attempt was made to use an object that is constrained to be local in a context where nonlocal information is required.
Exception MARSHAL
Action
Do not use a local object for an operation that may require going across the wire.
132
INFO: No more items.
Description
No keys or named values are available.
Exception None.
Action
The enumeration of keys or named values has reached the end of the items.
133
ERROR: The registry key is invalid.
Description
An unexpected error occurred while reading or writing the registry.
Action
Contact BEA Customer Support.
134
ERROR: Could not create key `val'.
Description
An error occurred when writing the registry.
Action
Administrative privileges are required for administrative functions, such as reordering interceptors. Contact BEA Customer Support.
135
ERROR: Could not delete key `val'.
Description
An error occurred when modifying the registry.
Action
Administrative privileges are required for administrative functions, such as reordering interceptors. Contact BEA Customer Support.
136
ERROR: Could not modify key `val'.
Description
An error occurred when modifying `val' in the registry.
Action
Administrative privileges are required for administrative functions, such as reordering interceptors. Contact BEA Customer Support.
137
ERROR: Could not find key `val'.
Description
An error occurred when looking up `val' in the registry.
Action
Check the spelling of the data being looked up (for example, the interceptor name). Contact BEA Customer Support.
138
ERROR: Could not create named value `val'.
Description
An error occurred when creating a new value in the registry.
Action
Administrative privileges are required for administrative functions, such as reordering interceptors. Contact BEA Customer Support.
139
ERROR: Could not delete named value `val'.
Description
An error occurred when modifying `val' in the registry.
Action
Administrative privileges are required for administrative functions, such as reordering interceptors. Contact BEA Customer Support.
140
ERROR: Could not modify named value `val'.
Description
An error occurred when modifying `val' in the registry.
Action
Administrative privileges are required for administrative functions, such as reordering interceptors. Contact BEA Customer Support.
141
ERROR: Could not find named value `val'.
Description
An error occurred when looking up `val' in the registry.
Action
Check the spelling of the data being looked up (for example, the interceptor name). Contact BEA Customer Support.
142
ERROR: Could not connect to `val' registry.
Description
An unexpected error occurred when accessing the `val' registry.
Action
Contact BEA Customer Support.
143
ERROR: Access is denied.
Description
The user does not have the privileges required for the access.
Action
Administrative privileges are required for administrative functions, such as reordering interceptors. Contact BEA Customer Support.
144
ERROR: Error closing key.
Description
An unexpected error occurred when modifying the registry.
Action
The disk may be full. Contact BEA Customer Support.
145
ERROR: Subkeys for key are still open.
Description
An unexpected error occurred while modifying the registry.
Action
Contact BEA Customer Support.
146
ERROR: The registry data is invalid for specified key.
Description
An unexpected error occurred while modifying the registry.
Action
Contact BEA Customer Support.
147
ERROR: Registry `RegistryName' not found.
Description
The specified registry partition was not found.
Exception INTF_REPOS
Action
Verify the registry partition name and that the registry partition exists.
149
ERROR: OA already exists.
Description
Internal error only. An Object Adapter with the same name already exists.
Exception OBJ_ADAPTER
Action
Contact BEA Customer Support.
150
ERROR: OA does not exist.
Description
Internal error only. An Object Adapter with the specified name does not exist.
Exception OBJ_ADAPTER
Action
Contact BEA Customer Support.
152
ERROR: OA not active.
Description
Internal error only. An Object Adapter is not active.
Exception OBJ_ADAPTER
Action
Contact BEA Customer Support.
153
ERROR: OA is suspended.
Description
Internal error only. An Object Adapter is suspended.
Exception OBJ_ADAPTER
Action
Contact BEA Customer Support.
154
ERROR: OA queue is too large.
Description
An Object Adapter has exceeded the size of the internal queue.
Exception OBJ_ADAPTER
Action
Contact BEA Customer Support.
155
ERROR: OA object not found.
Description
An Object Adapter object ID was not found.
Exception OBJECT_NOT_EXIST
Action
Ensure that the Object is active in the server.
156
ERROR: OA Servant not active.
Description
Internal error only. An Object Adapter object servant was not active.
Exception OBJ_ADAPTER
Action
Contact BEA Customer Support.
157
ERROR: OA Servant not unique.
Description
Internal error. An Object Adapter object servant was not unique.
Exception OBJ_ADAPTER
Action
Contact BEA Customer Support.
158
ERROR: Server Request discarded.
Description
An Object Adapter discarded the server request and the request was not processed.
Exception TRANSIENT
Action
None.
159
ERROR: Object is not a ServantActivator.
Description
The servant manager is not a PortableServer::ServantActivator object.
Exception TRANSIENT
Action
Verify that a ServantActivator object is specified in the call to set_servant_manager.
160
ERROR: Object is not a ServantLocator.
Description
The servant manager is not a PortableServer::ServantLocator object.
Exception TRANSIENT
Action
Verify that a ServantLocator object is specified in the call to set_servant_manager.
161
ERROR: Object is not a AdapterActivator.
Description
The servant manager is not a PortableServer::AdapterActivator object.
Exception TRANSIENT
Action
Verify that an AdapterActivator object is specified in the call to the activator.
163
ERROR: An error was returned by Tuxedo.
Description
The BEA TUXEDO system returned an error. For more information, see the minor code and the user log (ULOG).
Exception UNKNOWN
Action
None
164
ERROR: 'ObjectName' is not an operation in the interface.
Description
You specified an operation name that is defined in the interface, but is not an operation.
Exception Marshal
Action
Ensure that the specified name is an operation in the interface.
165
ERROR: The ORB is not initialized.
Description
A client application must initialize the ORB before using it.
Action
Add an appropriate ORB_init() call in your C++ application, or an ORB.init() in your Java application.
166
ERROR: Unknown URL type specified.
Description
The type of the CORBA URL specified (corbaloc, corbaname, etc.) is not valid according to the CORBA specific ation.
Action
Correct the format of URL specified.
167
ERROR: Unknown URL protocol specified.
Description
Description: The protocol part of the CORBA URL specified (IIOP or RIR) is not valid.
Action
Correct the format of URL specified.
168
ERROR: Bad URL address specified.
Description
The address part of the CORBA URL specified is not valid.
Action
Correct the format of URL specified.
169
ERROR: The specified URL is malformed.
Description
The CORBA URL specified could not be parsed correctly.
Action
Correct the format of URL specified.
170
ERROR: Support Interface val Not Found.
Description
In a valuetype definition, a supports clause was found listing one or more CORBA interfaces whose operations and attributes should be included in this valuetype definition. The interface name could not be found.
Action
Edit the IDL to include a definition of this interface before the valuetype definition.
171
ERROR: The specified initial service is unknown.
Description
The service specified by a remote client using either -ORBInitRef or -ORBDefaultInitRef was not found.
Action
Consult the documentation for a list of valid service names.
 |
 |
 |