Q Messages 1200-1299
|
|
|
1205
ERROR: Invalid high threshold type
Description
While executing the qcreate or qchange command, an invalid upper threshold value was specified (the suffix was not valid). The threshold value must be a number suffixed with 'b', 'B', '%', or 'm'.
Action
Re-enter the qcreate or qchange command using an appropriate threshold value.
See Also
qmadmin(1)
1207
ERROR: Invalid high threshold number
Description
While executing the qcreate or qchange command, an upper threshold value of 0 was specified, or a percentage greater than 100 was given.
Action
Re-enter the qcreate or qchange command using an appropriate threshold value.
See Also
qmadmin(1)
1210
ERROR: High and low threshold types do not match
Description
While executing the qcreate or qchange command, the suffix on the upper threshold value doesn't match the suffix on the lower threshold value.
Action
Re-enter the qcreate or qchange command using appropriate threshold values.
See Also
qmadmin(1)
1212
ERROR: Low threshold must be less than high threshold
Description
While executing the qcreate or qchange command, the lower threshold value is larger than the upper threshold value.
Action
Re-enter the qcreate or qchange command using appropriate threshold values such that the lower value is less than the upper threshold value.
See Also
qmadmin(1)
1215
ERROR: Threshhold command length must be less than len characters
Description
While executing the qcreate or qchange command, the threshold command was too long (that is, len characters or more).
Action
Re-enter the command with a threshold command that is 128 characters or less in length.
See Also
qmadmin(1)
1216
ERROR: Queue creation failed for queue name
Description
While executing the qcreate command, qmadmin failed to create the specified queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
Action
Re-enter the command when the problem has been resolved.
See Also
qmadmin(1)
1221
WARN: Priority not changed
Description
While changing message priorities with the qchangeprio command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
1223
ERROR: Queue name length must be less than len characters
Description
While executing the qchangequeue command, the queue name was too long (that is, len characters or more).
Action
Re-enter the command with a queue name that is 15 characters or less in length.
See Also
qmadmin(1)
1224
ERROR: Queue name must be specified
Description
While executing the qdestroy command, the queue name was not entered at the prompt or an empty string was specified on the command line.
Action
Re-enter the qdestroy command specifying a valid queue name.
See Also
qmadmin(1)
1226
WARN: Queue not changed
Description
While changing the queue on which messages are queued with the qchangequeue command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
1228
ERROR: Invalid time format
Description
While executing the qchangetime command, an invalid date and time value was specified.
Action
Re-enter the qchangetime command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second), with an optional '+' prefix to indicate a relative value.
See Also
qmadmin(1)
1230
WARN: Time not changed
Description
While changing message execution time with the qchangetime command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
1232
WARN: Messages not deleted
Description
While deleting messages with the qdeletemsg command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
1233
ERROR: Cannot specify the -p and -f options together
Description
While executing the qdestroy command, both the -p and -f options were specified.
Action
Re-enter the qdestroy command with either the -p or -f option but not both.
See Also
qmadmin(1)
1234
ERROR: Cannot specify the -p and -f options together
Description
While executing the qdestroy command, both the -p and -f options were specified.
Action
Re-enter the qdestroy command with either the -p or -f option but not both.
See Also
qmadmin(1)
1237
WARN: Queue not destroyed
Description
While destroying a message queue with the qdestroy command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
1238
ERROR: Failed to destroy queue queue
Description
While executing the qdestroy command, qmadmin failed to destroy the specified queue, queue. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
Action
Re-enter the command when the problem has been resolved. If the command fails because other processes are attached to the queue space, the -f option can be specified to force destroying the queue. If the command fails because there are messages on the queue, the -p option can be specified to purge the queue and destroy it.
See Also
qmadmin(1)
1241
ERROR: Failed to open queue space queue_space_name on config config
Description
While executing the qopen command, qmadmin failed to open the specified queue space, queue_space_name, on the configuration device config. There are many possible reasons for the failure and the specific reason is written to the userlog.
Action
Check the userlog for the specific reason for failure. Re-enter the command when the problem has been resolved.
See Also
qmadmin(1)
1246
WARN: Transaction not aborted
Description
While heuristically aborting a transaction with the qaborttrans command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
1250
WARN: Transaction not committed
Description
While heuristically committing a transaction with the qcommittrans command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
1256
ERROR: Invalid time format
Description
While executing the qscan command, an invalid date and time value was specified.
Action
Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second).
See Also
qmadmin(1)
1257
ERROR: Invalid time format
Description
While executing the qscan command with a range of date/time values, an invalid date and time value was specified for the second value.
Action
Re-enter the qscan command using a valid date/time value. The value must be of the form YY[MM[DD[HH[MM[SS]]]]] (that is, 2 digits for year, and optionally 2 digits each for the month, date, hour, minute, and second). A range of date/time values is two date/time values separated by a hyphen.
See Also
qmadmin(1)
1258
ERROR: Invalid priority
Description
While executing the qscan command, an invalid priority value was specified.
Action
Re-enter the qscan command using a valid priority value. The value must be numeric in the range 1-100, inclusive.
See Also
qmadmin(1)
1259
ERROR: Invalid priority
Description
While executing the qscan command, an invalid range of priority values was specified.
Action
Re-enter the qscan command using a valid priority value. A priority value must be numeric in the range 1-100, inclusive, and a range of priorities is two priority values separated by a hyphen.
See Also
qmadmin(1)
1260
ERROR: Invalid message id
Description
While executing the qscan command, an invalid message identifier value was specified.
Action
Re-enter the qscan command using a valid message identifier value. The value must be a string, less than 33 characters in length, with backslash and non-printable characters entered as a backslash followed by a two-character hexadecimal value for the character.
See Also
qmadmin(1)
1261
ERROR: Invalid correlation id
Description
While executing the qscan command, an invalid correlation identifier value was specified.
Action
Re-enter the qscan command using a valid correlation identifier value. The value must be a string, less than 33 characters in length, with backslash and non-printable characters entered as a backslash followed by a two-character hexadecimal value for the character.
See Also
qmadmin(1)
1262
ERROR: Queue name length must be less than len characters
Description
While executing the qset command, the queue name was too long (that is, len characters or more).
Action
Re-enter the command with a queue name that is 15 characters or less in length.
See Also
qmadmin(1)
1279
ERROR: Must specify queue space name
Description
While executing the qspacecreate command, the queue space name specified is the null string (that is, the name was entered on the command line as "", or return was entered for the prompt for the Queue Space Name).
Action
Re-enter the qspacecreate command with the correct queue space name.
See Also
qmadmin(1)
1280
ERROR: Queue space name length must be less than len characters
Description
While executing the qspacecreate command, the queue space name was too long (that is, len characters or more).
Action
Re-enter the command with a queue space name that is 15 characters or less in length.
See Also
qmadmin(1)
1294
ERROR: Error queue name length must be less than len characters
Description
While executing the qspacecreate command, the error queue name was too long (that is, len characters or more).
Action
Re-enter the command with an error queue name that is 15 characters or less in length.
See Also
qmadmin(1)
1295
ERROR: Queue space creation failed
Description
While executing the qspacecreate command, qmadmin failed to create the specified queue space. There are many possible reasons for the failure and the specific reason is written to the standard output or the userlog.
Action
Re-enter the command when the problem has been resolved.
See Also
qmadmin(1)
1298
WARN: Queue space not destroyed
Description
While destroying a queue space with the qspacedestroy command, the user did not respond with Y or y to the prompt for confirmation and the operation was not done.
Action
No action required.
See Also
qmadmin(1)
 |
 |
 |