TMADMIN Messages 500-599
512
ERROR: Cannot create device devname, start val, size val on val
Description
Creation of a new device using crdl
failed. The parameters to the creation are printed.
Action
Check to ensure that you have write permission on the device, that tlid
values are specified, and that the slice does not overlap with an existing device (use the lidl
command to check existing devices).
See Also
tmadmin
(1)
515
WARN: Not destroyed
Description
While executing dsdl
to destroy a device list entry, a yes answer was not provided to the prompt to ensure that the operation should be done.
Action
No action required.
See Also
tmadmin
(1)
516
ERROR: Cannot list device devindex on config-file
Description
While destroying a device using dsdl, the specified index on the configuration file could not be listed.
Action
Use the lidl
command to see what devices are available and specified a valid device index.
See Also
tmadmin
(1)
517
ERROR: Cannot destroy device index on device
Description
While destroying a device using dsdl
, the specified index on the configuration file could not be destroyed. This could occur for many reasons including the file is being updated by another process, entry 0 is being destroyed and other files or device entries exist, or an I/O error occurred.
Action
For device entry 0, use litc
and livtoc
to ensure that other entries do not exist. Re-try the operation.
See Also
tmadmin
(1)
520
WARN: Not re-initialized
Description
While executing indir
to re-initialize a configuration, a yes answer was not provided to the prompt to ensure that the operation should be done. This operation wipes out all files and device entries for the file - use it with care!
Action
No action required.
See Also
tmadmin
(1)
521
ERROR: Can't open file
Description
While executing indir
to re-initialize a configuration file, the specified file could not be opened. This operation wipes out all files and device entries for the file - use it with care!
Action
Make sure that the proper value was specified for the -z
option and that the file has read and write permission.
See Also
tmadmin
(1)
523
ERROR: Can't write file
Description
While executing indir
to re-initialize a configuration file, the specified file could not be updated. This operation wipes out all files and device entries for the file - use it with care!
Action
Make sure that the proper value was specified for the -z
option and that the file has read and write permission.
See Also
tmadmin
(1)
526
WARN: Not initialized
Description
While executing indl
to re-initialize a decide list entry, a yes answer was not provided to the prompt to ensure that the operation should be done.
Action
Contact your BEA TUXEDO system Technical Support.
See Also
tmadmin
(1)
527
ERROR: Cannot list device index on file
Description
While executing indl
to initialize a device list entry, an error occurred while reading information about the entry.
Action
Check to see that the file is a valid BEA TUXEDO configuration file, that you have read permission, and that the index is valid (use lidl
).
See Also
tmadmin
(1)
528
ERROR: Cannot re-initialize device index on file
Description
While executing indl
to initialize a device list entry, an error occurred while reading information about the entry. This operation frees up all space on that entry - do not do this operation if BEA TUXEDO tables are using space on the entry. Freeing up entry 0 clears all other device entries - do this with care!
Action
Check to see that the file is a valid BEA TUXEDO configuration file, that you have write permission, and that the index is valid (use lidl
). Another program may have the file locked for update.
See Also
tmadmin
(1)
530
ERROR: Device list not initialized
Description
The lidl
was executed for a configuration device that was not initialized.
Action
Make sure the device specified with the -z
option is correct. If it has not already been initialized, use the crdl
command to initialize it and create a device entry.
See Also
tmadmin
(1)
539
ERROR: Can't get vtoc on device
Description
The livtoc
was executed for a configuration device that was not initialized or for which the user does not have access permissions.
Action
Make sure the device specified with the -z
option is correct, and that you have read permissions. If it has not already been initialized, you must also have update permissions, and you should use the crdl
command to initialize the device and create a device entry.
See Also
tmadmin
(1)
544
WARN: No entries found
Description
A printgroup
or pg
was executed but no groups were found to match the specified group (-g
) or machine (-m
) options, or no groups exist.
Action
No action required.
See Also
tmadmin
(1)
552
ERROR: Migration not allowed
Description
The migg
or migrategroup
command was executed but the application is not configured with the MIGRATE
option set.
Action
Change the configuration to have the MIGRATE
option, and configure backup machines.
See Also
tmadmin
(1), ubbconfig
(5)
553
ERROR: Invalid group name
Description
The migg
or migrategroup
command was executed but an invalid group name was specified.
Action
Use the pg
command to print a list of valid group names.
See Also
tmadmin
(1)
554
ERROR: Error occurred (errval): Check ULOG file
Description
A migg
or migrategroup
command was executed but the operation failed.
Action
Check the event log for messages indicating the nature of the failure.
See Also
tmadmin
(1)
555
ERROR: Migration time out: Check ULOG file
Description
A migg
or migrategroup
command was executed but the operation did not complete within the configured timeout value.
Action
Check the event log for messages indicating the state of the migration. It may still complete after the time-out occurs.
See Also
tmadmin
(1)
557
ERROR: Migration not allowed
Description
The migm
or migratemach
command was executed but the application is not configured with the MIGRATE
option set.
Action
Change the configuration to have the MIGRATE
option, and configure backup machines.
See Also
tmadmin
(1), ubbconfig
(5)
558
ERROR: Invalid machine name
Description
The migm
or migratemach
command was executed but an invalid machine name was specified.
Action
Use the pg
command to print a list of valid group names and their associated machine names.
See Also
tmadmin
(1)
559
ERROR: Error occurred (errval): Check ULOG file
Description
A migm
or migratemach
command was executed but the operation failed.
Action
Check the event log for messages indicating the nature of the failure.
See Also
tmadmin
(1)
560
ERROR: Migration time out: Check ULOG file
Description
A migm
or migratemach
command was executed but the operation did not complete within the configured timeout value.
Action
Check the event log for messages indicating the state of the migration. It may still complete after the time-out occurs.
See Also
tmadmin
(1)
562
ERROR: Not running on Master
Description
The crlog
or crlg
command was run but not from the configured master machine.
Action
Execute the command from the configured master machine.
See Also
tmadmin
(1)
563
ERROR: Can't get log information
Description
The crlog
or crlg
command was executed but the log information for the specified or default machine could not be found.
Action
Make sure that the TUXCONFIG
file is loaded and that the machine name specified is valid.
See Also
tmadmin
(1), ubbconfig
(5)
564
ERROR: TLOGDEVICE must be specified
Description
The crlog
or crlg
command was executed but the configuration for the specified machine does not have a TLOGDEVICE
specified.
Action
Change the configuration for the machine to define a TLOGDEVICE
file.
See Also
tmadmin
(1), tmconfig
(1)
565
ERROR: remote log creation failed
Description
The crlog
or crlg
command was executed for a remote machine but the operation failed. This is most often because tlisten
(1) is not running on the remote machine.
Action
Make sure tlisten
is running on the remote machine. Check the event log on the local and remote machine for related messages.
See Also
tlisten
(1), tmadmin
(1)
566
ERROR: local log creation failed
Description
The crlog
or crlg
command was executed for the local machine but the operation failed.
Action
Check the event log on the local for related messages.
See Also
tmadmin
(1)
568
ERROR: can't open dump file - errno = errval
Description
The dumptlog
or dl
command was executed but the output file could not be created and opened. The errno value is printed.
Action
Check the errno value to determine the reason for the fopen()
failure. It may be that you do not have permissions on the directory or the file, or a lack of resources (files or space).
See Also
tmadmin
(1)
569
ERROR: command failed, check ULOG file for message
Description
The dumptlog
or dl
command was executed but getting information about the associated log file failed.
Action
Check the event log for the prior failure message (_gp_litbl
).
See Also
tmadmin
(1)
570
ERROR: command failed, check ULOG file for message
Description
The dumptlog
or dl
command was executed but opening the transaction log file failed.
Action
Check the event log for the prior failure message.
See Also
tmadmin
(1)
571
ERROR: command failed, check ULOG file for message
Description
The dumptlog
or dl
command was executed but reading the transaction log file failed.
Action
Check the event log for the prior failure message (_gp_tblread
).
See Also
tmadmin
(1)
572
ERROR: command failed, check ULOG file for message
Description
The dumptlog
or dl
command was executed but updating the transaction log file failed.
Action
Check the event log for the prior failure message (_gp_tblwrite
).
See Also
tmadmin
(1)
573
ERROR: Tmdumptlog: Page num skipped, chksum unmatch
Description
While processing a dl
or dumptlog
command, a page was found in the transaction log that was invalid. The page is skipped and processing continues.
Action
Contact your BEA TUXEDO system Technical Support.
See Also
tmadmin
(1)
575
ERROR: command failed, check ULOG file for message
Description
The dumptlog
or dl
command was executed but reading a page from the transaction log file failed.
Action
Check the event log for the prior failure message (_gp_tblread
).
See Also
tmadmin
(1)
576
ERROR: command failed, check ULOG file for message
Description
The dumptlog
or dl
command was executed but reading a page from the transaction log file failed.
Action
Check the event log for the prior failure message (_gp_tblread
).
See Also
tmadmin
(1)
579
ERROR: Not running on Master
Description
The dslog
or dslg
command was run but not from the configured master machine.
Action
Execute the command from the configured master machine.
See Also
tmadmin
(1)
580
ERROR: Not enough log information
Description
The dslog
or dslg
command was executed but the log information for the specified or default machine could not be found, or a TLOGDEVICE
was not configured.
Action
Make sure that the TUXCONFIG
file is loaded and that the machine name specified is valid. Change the configuration for the machine to define a TLOGDEVICE
file.
See Also
tmadmin
(1), ubbconfig
(5)
581
ERROR: Application is still active
Description
The dslog
or dslg
command was executed but one or more servers are still active.
Action
Shut down the application and re-run the command.
See Also
tmadmin
(1)
583
ERROR: Not destroyed
Description
While executing dslog
or dslg
to destroy a transaction log, a yes answer was not provided to the prompt to ensure that the operation should be done.
Action
No action required.
See Also
tmadmin
(1)
584
ERROR: remote log destroy failed
Description
The dslog
or dslg
command was executed for a remote machine but the operation failed. This is most often because tlisten
(1) is not running on the remote machine.
Action
Make sure tlisten
is running on the remote machine. Check the event log on the local and remote machine for related messages.
See Also
tlisten
(1), tmadmin
(1)
585
ERROR: tlog_destroy failed
Description
The dslog
or dslg
command was executed for the local machine but the operation failed.
Action
Check the event log on the local for related messages.
See Also
tmadmin
(1)
587
ERROR: Not running on Master
Description
The inlog
or inlg
command was run but not from the configured master machine.
Action
Execute the command from the configured master machine.
See Also
tmadmin
(1)
588
ERROR: Not enough log information
Description
The inlog
or inlg
command was executed but the log information for the specified or default machine could not be found, or a TLOGDEVICE
was not configured.
Action
Make sure that the TUXCONFIG
file is loaded and that the machine name specified is valid. Change the configuration for the machine to define a TLOGDEVICE
file.
See Also
tmadmin
(1), ubbconfig
(5)
589
ERROR: Application is still active
Description
The inlog
or inlg
command was executed but the one or more servers are still active.
Action
Shut down the application and re-run the command.
See Also
tmadmin
(1)
591
ERROR: remote log init failed
Description
The inlog
or inlg
command was executed for a remote machine but the operation failed. This is most often because tlisten
(1) is not running on the remote machine.
Action
Make sure tlisten
is running on the remote machine. Check the event log on the local and remote machine for related messages.
See Also
tlisten
(1), tmadmin
(1)
592
ERROR: tlog_reinit failed
Description
The inlog
or inlg
command was executed for the local machine but the operation failed.
Action
Check the event log on the local for related messages.
See Also
tmadmin
(1)
594
ERROR: The system is not active
Description
The loadtlog
command was executed but the application is not currently active or there is an error in finding the master machine.
Action
Check the event log for messages related to the failure.
See Also
tmadmin
(1)
595
ERROR: loadtlog failed, can't open tlog file
Description
The loadtlog
command was executed but the transaction log file could not be opened for reading/writing.
Action
Check that the file specified is valid (e.g., that the directory and file specified exists and has read and write permission). Check for limited resources (out of files or disk space).
See Also
tmadmin
(1)
596
ERROR: can't write tlog dump file - errno = val
Description
The loadtlog
command was executed but the status of the transaction log file could not be determined.
Action
Contact your BEA TUXEDO system Technical Support.
See Also
tmadmin
(1)
597
ERROR: loadtlog failed, can't get msgbuf. tperrno = sub
Description
An attempt dynamically to allocate memory from the operating system failed while trying to load a transaction log.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
598
ERROR: loadtlog failed, can't read logfile. errno = val
Description
The loadtlog
command was executed but a read of the transaction log file failed.
Action
Make sure that the file specified is a valid transaction log. The file is character-based and can be read using any text editor.
See Also
tmadmin
(1)
599
ERROR: can't close tlog dump file - errno = errno.
Description
The loadtlog
command was executed. After reading the transaction log, the close of the file failed.
Action
This error is ignored and processing continues. No action required.
See Also
tmadmin
(1)