Provides the interface used to configure a Web service that is deployed on a WebLogic Server instance.
A Web service is a special kind of J2EE Web Application that contains an additional deployment descriptor, web-services.xml, that describes the Web service. Because a Web service is packaged as a J2EE Web application, its component MBean is the same as that of a Web application, and thus simply extends the WebAppComponentMBean interface, adding no new methods.
WebLogic Server instantiates this interface only when you deploy a Web service.
This interface can configure Web services that are deployed as WAR files or exploded directories.
Deprecated.
| Since | 7.0.0.0 | ||
| Security roles | The following roles have read, write, and invoke permission for all non-encrypted attributes and operations in this MBean:
|
||
| Fully Qualified Interface Name | If you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:weblogic.management.configuration.WebServiceComponentMBean
|
||
| Factory Methods | No factory methods. Instances of this MBean are created automatically. | ||
| Access Points Inherited from DeploymentMBean |
Because this MBean extends or implements DeploymentMBean, you can also access this MBean by retrieving DeploymentMBeans. The following attributes contain DeploymentMBeans and its subtypes:
|
||
| Access Points Inherited from WebAppComponentMBean |
Because this MBean extends or implements WebAppComponentMBean, you can also access this MBean by retrieving WebAppComponentMBeans. The following attributes contain WebAppComponentMBeans and its subtypes:
|
||
| Deprecated Factory Methods and Access Points |
|
This section describes attributes that provide access to other MBeans. For more information about the MBean hierarchy, refer to WebLogic Server MBean Data Model.
List of servers and clusters where this module is currently active. This attribute is valid only for modules deployed via the two phase protocol. Modules deployed with the WLS 6.x deployment protocol do not maintain this attribute. To determine active targets for a module regardless of deployment protocol, use DeployerRuntimeMBean#lookupActiveTargetsForComponent .
For more information, see:
| Privileges | Read only |
| Type | TargetMBean[] |
| Relationship type: | Reference. |
The application this component is a part of. This is guaranteed to never be null.
| Privileges | Read/Write |
| Type | ApplicationMBean |
| Relationship type: | Reference. |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
You must select a target on which an MBean will be deployed from this list of the targets in the current domain on which this item can be deployed. Targets must be either servers or clusters. The deployment will only occur once if deployments overlap.
| Privileges | Read/Write |
| Type | TargetMBean[] |
| Relationship type: | Reference. |
Provides a means to target your deployments to specific virtual hosts.
| Privileges | Read/Write |
| Type | VirtualHostMBean[] |
| Relationship type: | Reference. |
Returns a list of the targets on which this deployment is deployed.
Deprecated.
| Privileges | Read/Write |
| Type | WebServerMBean[] |
| Relationship type: | Reference. |
This section describes the following attributes:
Provides the name of the AuthFilter Servlet class, which will be called before and after all authentication and authorization checks in the Web Application.
Deprecated.
| Privileges | Read/Write |
| Type | java.lang.String |
Provides the name of the Realm in the Basic Authentication HTTP dialog box, which pops up on the browsers. authRealmName is now set in weblogic.xml.
Deprecated.
| Privileges | Read/Write |
| Type | java.lang.String |
| Default Value | weblogic |
Private property that disables caching in proxies.
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
A priority that the server uses to determine when it deploys an item. The priority is relative to other deployable items of the same type.
For example, the server prioritizes and deploys all EJBs before it prioritizes and deploys startup classes.
Items with the lowest Deployment Order value are deployed first. There is no guarantee on the order of deployments with equal Deployment Order values. There is no guarantee of ordering across clusters.
| Privileges | Read/Write |
| Type | int |
| Default Value | 1000 |
| Minimum value | 0 |
| Maximum value | 2147483647 |
Specifies whether the target should automatically generate an HTML directory listing if no suitable index file is found.
Indicates whether or not to automatically generate an HTML directory listing if no suitable index file is found.
Deprecated.
| Privileges | Read/Write |
| Type | boolean |
Returns the MBean info for this MBean.
Deprecated.
| Privileges | Read only |
| Type | javax.management.MBeanInfo |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName:
Name=user-specified-name
| Privileges | Read/Write |
| Type | java.lang.String |
Optional information that you can include to describe this configuration.
WebLogic Sever saves this note in the domain's configuration
file (config.xml) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<. Carriage returns/line feeds are
preserved.
If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
| Privileges | Read/Write |
| Type | java.lang.String |
Returns the ObjectName under which this MBean is registered in the MBean server.
Deprecated.
| Privileges | Read only |
| Type | weblogic.management.WebLogicObjectName |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Return the immediate parent for this MBean
| Privileges | Read/Write |
| Type |
Specifies whether classes loaded in the WEB-INF directory will be loaded in preference to classes loaded in the application or system calssloader.
Deprecated the setting from console beginning with version 8.1. You must now set this in weblogic.xml.
Deprecated.
| Privileges | Read/Write |
| Type | boolean |
Returns false if the the MBean represented by this object has been unregistered.
Deprecated.
| Privileges | Read only |
| Type | boolean |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Indicates whether servlet extensions should be treated as though they are lower case even if they are written in upper case.
If True, the server treats all .extensions except .html as lower case. This is only necessary on WindowsNT. This property is being deprecated. The extension comparision will be case insensitive by default on Win32.
Deprecated.
| Privileges | Read/Write |
| Type | boolean |
The amount of time (in seconds) that WebLogic Server waits to check if a servlet was modified and needs to be reloaded.
How often WebLogic checks whether a servlet has been modified, and if so reloads it. When the value is set to -1, the servlet is never reloaded, and when the vlue is set to 0, the servlet is reloaded after each check.
Deprecated.
| Privileges | Read/Write |
| Type | int |
| Default Value | 1 |
Specifies whether runtime MBeans will be created for session monitoring.
If true, then runtime MBeans will be created for sessions; otherwise, they will not.
Deprecated.
| Privileges | Read/Write |
| Type | boolean |
This provides size of the pool used for single threaded mode servlets. It
defines the size of the pool used for SingleThreadedModel instance pools.
Deprecated.
| Privileges | Read/Write |
| Type | int |
| Default Value | 5 |
Returns the type of the MBean.
| Privileges | Read only |
| Type | java.lang.String |
| Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
A URI that points to the application module, usually on the Administration Server.
URI can only be set if this is a standalone component; the URI for an application is defined in the application's deployment descriptor.
*
| Privileges | Read/Write |
| Type | java.lang.String |
This section describes the following operations:
Indicates whether component has been activated on a server
| Operation Name | "activated" |
| Parameters | Object [] { target }
where:
|
| Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
| Returns |
boolean
|
You can add a target to specify additional servers on which the deployment can be deployed. The targets must be either clusters or servers.
| Operation Name | "addTarget" |
| Parameters | Object [] { target }
where:
|
| Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
| Returns |
boolean
|
| Exceptions |
|
Used to add a virtual host to the list of virtual hosts to which deployments may be targeted.
| Operation Name | "addVirtualHost" |
| Parameters | Object [] { target }
where:
|
| Signature | String [] {
"weblogic.management.configuration.VirtualHostMBean" } |
| Returns |
boolean
|
| Exceptions |
|
This adds a target to the list of web servers to which a deployment may be targeted.
Deprecated.
| Operation Name | "addWebServer" |
| Parameters | Object [] { target }
where:
|
| Signature | String [] {
"weblogic.management.configuration.WebServerMBean" } |
| Returns |
boolean
|
| Exceptions |
|
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
To insure that you are freezing the default value, invoke the
restoreDefaultValue operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
| Operation Name | "freezeCurrentValue" |
| Parameters | Object [] { attributeName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|
| Exceptions |
|
Returns true if the specified attribute has been set explicitly in this MBean instance.
| Operation Name | "isSet" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
boolean
|
| Operation Name | "refreshDDsIfNeeded" |
| Parameters | Object [] { }
where: |
| Signature | String [] {
"[Ljava.lang.String;" } |
| Returns |
void
|
Removes the value of the addTarget attribute.
For more information, see:
| Operation Name | "removeTarget" |
| Parameters | Object [] { target }
where:
|
| Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
| Returns |
boolean
|
| Exceptions |
|
Used to remove a virtual host from the list of virtual hosts to which deployments may be targeted.
| Operation Name | "removeVirtualHost" |
| Parameters | Object [] { target }
where:
|
| Signature | String [] {
"weblogic.management.configuration.VirtualHostMBean" } |
| Returns |
boolean
|
| Exceptions |
|
This removes a target from the list of web servers which may be targeted for deployments.
Deprecated.
| Operation Name | "removeWebServer" |
| Parameters | Object [] { target }
where:
|
| Signature | String [] {
"weblogic.management.configuration.WebServerMBean" } |
| Returns |
boolean
|
| Exceptions |
|
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
| Operation Name | "restoreDefaultValue" |
| Parameters | Object [] { attributeName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|
| Exceptions |
|
Restore the given property to its default value.
| Operation Name | "unSet" |
| Parameters | Object [] { propertyName }
where:
|
| Signature | String [] {
"java.lang.String" } |
| Returns |
void
|