This bean defines a Jolt connection pool.
If you use the getMBeanInfo
operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.JoltConnectionPoolMBean
Because this MBean extends or implements DeploymentMBean, you can also access this MBean by retrieving DeploymentMBeans. The following attributes contain DeploymentMBeans and its subtypes:
|
This section describes attributes that contain child MBeans. For more information about the MBean hierarchy, refer to WebLogic Server MBean Data Model.
|
You must select a target on which an MBean will be deployed from this list of the targets in the current domain on which this item can be deployed. Targets must be either servers or clusters. The deployment will only occur once if deployments overlap.
Factory Methods | No explicit creator method. The child shares the lifecycle of its parent. |
Privileges | Read/Write |
Type | TargetMBean[] |
This section describes the following attributes:
The application password for this Jolt connection pool. (This is required only when the security level in the Tuxedo domain is USER_AUTH, ACL or MANDATORY_ACL).
As of 8.1 sp4, when you get the value of this attribute, WebLogic Server does the following:
Retrieves the value of the
ApplicationPasswordEncrypted
attribute.
Decrypts the value and returns the unencrypted password as a String.
When you set the value of this attribute, WebLogic Server does the following:
Encrypts the value.
Sets the value of the ApplicationPasswordEncrypted
attribute to the encrypted value.
Using this attribute (ApplicationPassword
) is a
potential security risk because the String object (which contains
the unencrypted password) remains in the JVM's memory until garbage
collection removes it. Depending on how memory is allocated in the
JVM, a significant amount of time could pass before this
unencrypted data is removed from memory.
Instead of using this attribute, use
ApplicationPasswordEncrypted
.
For more information, see:
Privileges | Read/Write |
Type | java.lang.String |
Encrypted | true |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The encrypted application password for this connection pool.
To set this attribute, pass an unencrypted string to the MBean
server's setAttribute
method. WebLogic Server encrypts
the value and sets the attribute to the encrypted value.
To compare a password that a user enters with the encrypted
value of this attribute, go to the same WebLogic Server instance
that you used to set and encrypt this attribute and use
weblogic.management.EncryptionHelper.encrypt()
to
encrypt the user-supplied password. Then compare the encrypted
values.
For more information, see:
Privileges | Read/Write |
Type | byte[] |
Encrypted | true |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
A priority that the server uses to determine when it deploys an item. The priority is relative to other deployable items of the same type.
For example, the server prioritizes and deploys all EJBs before it prioritizes and deploys startup classes.
Items with the lowest Deployment Order value are deployed first. There is no guarantee on the order of deployments with equal Deployment Order values. There is no guarantee of ordering across clusters.
Privileges | Read/Write |
Type | int |
Default Value | 1000 |
Minimum value | 0 |
Maximum value | 2147483647 |
The list of Jolt Server Listeners (JSLs) addresses that is used if the connection pool cannot estabilish connections to the Primary Addresses, or if the primary connections fail.
The format of each address is: //hostname:port. Multiple addresses should be separated by commas.
These JSLs need not reside on the same host as the primary JSLs.
Privileges | Read/Write |
Type | class java.lang.String[] |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The maximum number of connections that can be made from this Jolt connection pool.
Privileges | Read/Write |
Type | int |
Default Value | 1 |
Minimum value | 1 |
Maximum value | 2147483647 |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The minimum number of connections to be added to this Jolt connection pool when WebLogic Server starts.
Privileges | Read/Write |
Type | int |
Default Value | 0 |
Minimum value | 0 |
Maximum value | 2147483647 |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user-specified name of this MBean instance.
This name is included as one of the key properties in the
MBean's javax.management.ObjectName
:
Name=user-specified-name
Privileges | Read/Write |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Optional information that you can include to describe this configuration.
WebLogic Sever saves this note in the domain's configuration
file (config.xml
) as XML PCDATA. All left angle
brackets (<) are converted to the XML entity
<
. Carriage returns/line feeds are
preserved.
If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.
Privileges | Read/Write |
Type | java.lang.String |
Return the immediate parent for this MBean
Privileges | Read/Write |
Type | |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The list of addresses for the primary Jolt Server Listeners (JSLs) on the Tuxedo system.
The format of each address is: //hostname:port. Multiple addresses should be separated by commas.
Privileges | Read/Write |
Type | class java.lang.String[] |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The number of seconds the client waits to receive a response before timing out.
Privileges | Read/Write |
Type | int |
Default Value | 0 |
Minimum value | 0 |
Maximum value | 2147483647 |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Indicates whether this Jolt connection pool passes the connection pool's security context (user name, password and other information) from the WebLogic Server user to the Tuxedo domain.
If you enable the connection pool to pass the security context,
you must start the Jolt Service Handler (JSH) with the
-a
option. When the JSH gets a message with the
caller's identity, it calls impersonate_user()
to get
the appkey for the user. JSH caches the appkey, so the next time
the caller makes a request, the appkey is retrieved from the cache
and the request is forwarded to the service. A cache is maintained
by each JSH, which means that there will be a cache maintained for
all the session pools connected to the same JSH.
You must enable Security Context if Tuxedo requires secured connections.
Privileges | Read/Write |
Type | boolean |
Secure value | true |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
Returns the type of the MBean.
Privileges | Read only |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
A user name that applications specify to connect to this Jolt
connection pool. If Security Context is enabled, this name must be
the name of an authorized Tuxedo user. (Specifying a Tuxedo user
name is required if the Tuxedo authentication level is
USER_AUTH
.)
Privileges | Read/Write |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user password for this Jolt connection pool.
As of 8.1 sp4, when you get the value of this attribute, WebLogic Server does the following:
Retrieves the value of the UserPasswordEncrypted
attribute.
Decrypts the value and returns the unencrypted password as a String.
When you set the value of this attribute, WebLogic Server does the following:
Encrypts the value.
Sets the value of the UserPasswordEncrypted
attribute to the encrypted value.
Using this attribute (UserPassword
) is a potential
security risk because the String object (which contains the
unencrypted password) remains in the JVM's memory until garbage
collection removes it. Depending on how memory is allocated in the
JVM, a significant amount of time could pass before this
unencrypted data is removed from memory.
Instead of using this attribute, use
UserPasswordEncrypted
.
For more information, see:
Privileges | Read/Write |
Type | java.lang.String |
Encrypted | true |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The user password for this connection pool.
To set this attribute, pass an unencrypted string to the MBean
server's setAttribute
method. WebLogic Server encrypts
the value and sets the attribute to the encrypted value.
To compare a password that a user enters with the encrypted
value of this attribute, go to the same WebLogic Server instance
that you used to set and encrypt this attribute and use
weblogic.management.EncryptionHelper.encrypt()
to
encrypt the user-supplied password. Then compare the encrypted
values.
For more information, see:
Privileges | Read/Write |
Type | byte[] |
Encrypted | true |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
The Tuxedo user role for this Jolt connection pool. (This is required only when the security level in the Tuxedo domain is USER_AUTH, ACL, or MANDATORY_ACL).
Privileges | Read/Write |
Type | java.lang.String |
Redeploy or Restart required | Changes take effect after you redeploy the module or restart the server. |
This section describes the following operations:
Adds a feature to the FailoverAddress attribute of the JoltConnectionPoolMBean object
Operation Name | "addFailoverAddress" |
Parameters | Object [] {
address }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
javax.management.InvalidAttributeValueException
Adds a feature to the PrimaryAddress attribute of the JoltConnectionPoolMBean object
Operation Name | "addPrimaryAddress" |
Parameters | Object [] {
address }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
javax.management.InvalidAttributeValueException
You can add a target to specify additional servers on which the deployment can be deployed. The targets must be either clusters or servers.
Operation Name | "addTarget" |
Parameters | Object [] {
target }
where:
|
Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
Returns |
boolean
|
javax.management.InvalidAttributeValueException
weblogic.management.DistributedManagementException
If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.
Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.
To insure that you are freezing the default value, invoke the
restoreDefaultValue
operation before you invoke
this.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.
Deprecated.
Operation Name | "freezeCurrentValue" |
Parameters | Object [] {
attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
javax.management.AttributeNotFoundException
javax.management.MBeanException
Returns true if the specified attribute has been set explicitly in this MBean instance.
Operation Name | "isSet" |
Parameters | Object [] {
propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
Operation Name | "removeFailoverAddress" |
Parameters | Object [] {
address }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
javax.management.InvalidAttributeValueException
Operation Name | "removePrimaryAddress" |
Parameters | Object [] {
address }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
boolean
|
javax.management.InvalidAttributeValueException
Removes the value of the addTarget attribute.
For more information, see:
Operation Name | "removeTarget" |
Parameters | Object [] {
target }
where:
|
Signature | String [] {
"weblogic.management.configuration.TargetMBean" } |
Returns |
boolean
|
javax.management.InvalidAttributeValueException
weblogic.management.DistributedManagementException
If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.
Default values are subject to change if you update to a newer
release of WebLogic Server. To prevent the value from changing if
you update to a newer release, invoke the
freezeCurrentValue
operation.
This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.
Deprecated.
Operation Name | "restoreDefaultValue" |
Parameters | Object [] {
attributeName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|
javax.management.AttributeNotFoundException
Restore the given property to its default value.
Operation Name | "unSet" |
Parameters | Object [] {
propertyName }
where:
|
Signature | String [] {
"java.lang.String" } |
Returns |
void
|