CMDSCA Messages 1300-1399
|
|
1300
ERROR: Invalid option: opt
Description
User entered invalid command line option opt for scaadmin.
Action
Use the correct command line option.
See Also
scaadmin
1301
ERROR: Invalid argument: arg
Description
Invalid scaadmin command line argument.
Action
Remove the invalid command line argument.
See Also
scaadmin
1302
ERROR: TUXCONFIG environment variable not set.
Description
TUXCONFIG environment variable is not set.
Action
Set the TUXCONFIG environment variable to a valid TUXCONFIG file and re-run the scaadmin utility.
1303
ERROR: TUXCONFIG must be an absolute pathname.
Description
The TUXCONFIG environment variable must be of full path name.
Action
Set the TUXCONFIG environment variable to a valid TUXCONFIG file with full path name from system root, and then re-run the scaadmin utility.
1304
Usage: procname [-v]
Description
Usage information of the program procname.
Action
No action required.
1305
ERROR: Error while obtaining the Bulletin Board parameters
Description
An error was produced in scaadmin while retrieving the Bulletin Board parameters. A more specific error explaining the situation should already exist in the user log.
Action
Check the user log for a more specific error message. Check that TUXCONFIG is readable, and re-run the scaadmin.
See Also
scaadmin
1306
ERROR: Could not determine level of authentication required.
Description
when scaadmin starts up, it calls tpchkauth(3c) to see what level of authentication is required by the application. This message is issued when tpchkauth(3c) fails. tpchkauth(3c) can fail if scaadmin cannot find the TUXCONFIG file.
Action
Make sure the TUXCONFIG environment variable is set correctly.
See Also
scaadmin
1307
ERROR: Could not allocate internal TPINIT typed buffer.
Description
Executing the scaadmin utility error. An error was encountered while trying to obtain virtual memory for the TPINIT buffer.
Action
Attempt to identify and stop any extraneous processes to free up virtual memory on your system, and then retry the utility.
See Also
scaadmin
1308
ERROR: Could not find entry for user UID.
Description
When scaadmin is invoked, the invoker;s login ID is used as the "User Name" when scaadmin joins the application. If there is an error retrieving the login ID from the system password file, this message is printed.
Action
Contact your system administrator to ensure that your password entry contains your user ID (UID) and your login.
See Also
scaadmin
1309
Application Password :
Description
A prompt for user to enter application password.
Action
Enter the configured Tuxedo application password.
See Also
scaadmin
1310
ERROR: Unable to obtain application password.n
Description
If an applicatoion password is required, scaadmin either prompts for it when the invoker is attached to a terminal, or it reads from the environment variable, APP_PW, if standard input is not terminal. This message is issued when the password cannot be obtained. The most common cause for this is that APP_PW is not set and standard input is not a terminal.
Action
If scaadmin is not attached to a terminal when invoked then check that the environment variable, APP_PW, is set correctly.
See Also
scaadmin
1311
ERROR: can't become a client - tpinit() failed - n
Description
Execution of wsadmin failed because the user could not join the application. The printed string indicates the reason for the failure. This message can be printed either because no more clients can join the application or because the user failed security permissions.
Action
If the reason is that no more clients can join the application, re-try the operation a later time. The system should be configured to allow for more clients.
See Also
scaadmin
1312
Bulletin board does not exist.
Description
The Tuxedo application not yet booted.
Action
Information only.
See Also
scaadmin
1313
Entering boot mode.
Description
Entering boot mode.
Action
Information only.
See Also
scaadmin
1314
WARN: Cannot become administrator. Limited set of commands available.
Description
The scaadmin program was not able to enter the administrative mode. A limited set of commands is available.
Action
No action is required.
See Also
scaadmin
1316
Attaching to active bulletin board.
Description
Informational message telling user that scaadmin attaching to an active bulletin board.
Action
No action is required.
See Also
scaadmin
1317
ERROR: Error executing cmd.
Description
A command was given to scaadmin that was to be executed by teh shell. An error was encountered by the shell in executing the command.
Action
Retry the command. If it continues to fail, refer to the system(3S) manual page for reasons why the command may have failed.
See Also
scaadmin
1318
ERROR: -char option: argument must be numeric.
Description
When the -char option is used as an argument to the scaadmin sub-command, its argument must be a numeric value.
Action
Try the command again with the numeric vale for the char option.
See Also
scaadm
1319
opt now on.
Description
Command option opt is turned on.
Action
No action is required.
See Also
scaadmin
1320
opt now off.
Description
Command option opt is turned off.
Action
No action is required.
See Also
scaadmin
1321
(not set)
Description
No default value set.
Action
No action is required.
See Also
scaadmin
1322
Default Settings:
Description
Default option values setting information header.
Action
No action is required.
See Also
scaadmin
1323
LMID: lmid
Description
Default command option for LMID is lmid.
Action
Informational message, no action is required.
See Also
scaadmin
1324
group name: grp
Description
Default command option for group is grp.
Action
No action is required.
See Also
scaadmin
1325
server id: id
Description
Default command option for server identification is id.
Action
No action is required.
See Also
scaadmin
1326
server name: svr
Description
Default command option for server executable name is svr.
Action
No action is required.
See Also
scaadmin
1327
ERROR: Can't allocate memory. (IC=)
Description
scaadmin detected an error while trying to process the operation specified by the value code. The process was unable to obtain virtual memory. There value code is an internal error code for use in diagnosis.
Action
Attempt to identify and stop any extraneous processes t free up virtual memory on your system.
See Also
scaadmin
1328
ERROR: Cannot perform the operation. Please check the ULOG for more descriptive message. (IC=)
Description
Action
1329
ERROR: Invalid machine_id value
Description
The machine_id value is invalid.
Action
Use the valid machine_id value.
See Also
scaadmin
1330
ERROR: machine instance is not present
Description
The specified machine id is not available.
Action
Boot the Tuxedo application on all the machine nodes in the configuration.
See Also
scaadmin
1331
ERROR: call SCA service error(tperrno=errno)
Description
Failed to call SCA service with error information described by error number errno(/var>.
Action
Check to see whether all the configured SCA servers are booted and available. If not, boot them.
See Also
scaadmin
1333
ERROR: Bad LMID(lmid).
Description
The specified argument lmid for command option LMID is invalid or not available.
Action
Use the correct LMID value for the scaadmin command.
See Also
scaadmin
1334
ERROR: Invalid server group name (grp).
Description
The specified argument grp for command option group is invalid.
Action
Use the correct group name value for the scaadmin command.
See Also
scaadmin
1335
ERROR: Illegal value for server id.
Description
The specified argument value for command option service id is not valid.
Action
Use the correct server id value for the scaadmin command.
See Also
scaadmin
1336
ERROR: Memory allocation failure.
Description
Failed to allocate memory to process scaadmin unload command.
Action
Install more system memory or configure larger system virtual memory.
See Also
scaadmin
1337
ERROR: Memory allocation failure.
Description
Failed to allocate memory to process scaadmin unload command.
Action
Install more system memory or configure larger system virtual memory.
See Also
scaadmin
1338
ERROR: Execution of reload failed, processing stopped.
Description
The reload scaadmin command failed.
Action
Check whether the targeted SCA server is booted, if not boot it. If the server is already booted check whether it is really a SCA server.
See Also
scaadmin
1339
ERROR: Bad LMID(lmid).
Description
The specified argument lmid for command option LMID is invalid or not available.
Action
Use the correct LMID value for the scaadmin command.
See Also
scaadmin
1340
ERROR: Invalid server group name (grp).
Description
The specified argument grp for command option group is invalid.
Action
Use the correct group name value for the scaadmin command.
See Also
scaadmin
1341
ERROR: Illegal value for server id.
Description
The specified argument value for command option service id is not valid.
Action
Use the correct server id value for the scaadmin command.
See Also
scaadmin
1342
ERROR: Memory allocation failure.
Description
Failed to allocate memory to process scaadmin printstats command.
Action
Install more system memory or configure larger system virtual memory.
See Also
scaadmin
1343
ERROR: Memory allocation failure.
Description
Failed to allocate memory to process scaadmin printstats command.
Action
Install more system memory or configure larger system virtual memory.
See Also
scaadmin
1344
ERROR: Exceution of printstats failed, processing stopped.
Description
The printstats scaadmin command failed.
Action
Check whether the targeted SCA server is booted, if not boot it. If the server is already booted check whether it is really a SCA server.
1345
ERROR: Memory allocation failure.
Description
Failed to allocate memory to process target SCA server list.
Action
Install more memory or configure larger virtual memory.
1346
ERROR: Reading *SERVERS section
Description
Failed to read TUXCONFIG configuration's "SERVERS" section to process target SCA server list.
Action
Make sure Tuxedo application is booted. If this problem persists, contact Oracle Technical Support.
See Also
scaadmin
1347
ERROR: Failed to acquire BB lock.
Description
Failed to acquire Bulletin Board access lock.
Action
Make sure your Tuxedo application is booted and running. If this problem persists, contact Oracle Technical Support.
1348
ERROR: Unable to find service svc
Description
Unable to find the SCA administrative service svc.
Action
Make sure the server is a SCA server and is built using buildscacomponent and buildscaserver.
See Also
scaadmin, buildscacompoient, buildscaserver
1349
ERROR: No service entry found.
Description
No target SCA administrative service found in the Tuxedo application.
Action
Make sure the Tuxedo configuration is correct. And if the configuration contains SCA servers then make sure there server are really SCA servers and are built using buildscacomponent and buildscaserver.
See Also
scaadmin, buildscacompoient, buildscaserver
1350
ERROR: Invalid server ID (svrid)
Description
The specified scaadmin server id command option is not found or not valid.
Action
Use the valid server id when issue scaadmin command.
See Also
scaadmin
1351
ERROR: No service entry found for group (grp)
Description
There is no service entry for server group grp found.
Action
Correct the command option for server group to make it valid and make sure server group is booted.
See Also
scaadmin
1352
ERROR: Invalid server name (svrname)
Description
The specified scaadmin command option server name is not valid or not booted.
Action
Correct the command option for server name to make it valid and make sure server svrname is booted.
See Also
scaadmin
1353
ERROR: No valid machine entry found
Description
The specified logical machine id is not valid and can not be found in current Tuxedo configuration.
Action
Correct the problem by using correct machine id as scaadmin command option.
See Also
scaadmin
1354
ERROR: No service entry found for machine (mach)
Description
There is no SCA administrative service found for machine mach.
Action
Use a valid machine id in the scaadmin so that there are SCA server configured and booted.
See Also
scaadmin
1355
ERROR: Group grp is not deployed on mach
Description
The server goup grp is not configured on machine mach or configured but not booted.
Action
Use a server group name that is configured and booted on target machine mach.
See Also
scaadmin
1356
ERROR: Group grp is not deployed on mach
Description
The server goup grp is not configured on machine mach or configured but not booted.
Action
Use a server group name that is configured and booted on target machine mach.
See Also
scaadmin
 |
 |
 |