GWWS Messages 1200-1299
|
|
1201
Security Error: Username/password pair mismatch in HTTP header and SOAP request header.
Description
Username/password can be specified in both HTTP basic authentication and WS-Security UsernameToken authentication. This error message is issued if the username/password pair mismatch for these two authentication modes.
Action
Make sure the username/password pair the same if they are specified for both HTTP basic authentication and WS-Security UsernameToken authentication.
1202
Security Error: Failed to acquire security credential from SOAP request.
Description
The SOAP request contains WS-Security header, but GWWS failed to retrieve the security credential from the request.
Action
Check if the SOAP request conform to the standard format.
1203
Security Error: Failed to acquire security credential from SOAP request (errcode = value).
Description
The SOAP request contains WS-Security header, but GWWS failed to retrieve the security credential from the request.
Action
Check if the SOAP request conform to the standard format.
1205
Security Error: SOAP request carry Username token forbidden by security policy.
Description
A SOAP request arrived violated the WS-Security policy constraints of the web service. WS-Security policy explicitly declare not to send UsernameToken in the SOAP request, but the request carry the Username token.
Action
Send SOAP request that conforms to the WS-Security policy.
1206
Security Error: SOAP request carry X.509 token forbidden by security policy.
Description
A SOAP request arrived violated the WS-Security policy constraints of the web service. WS-Security policy explicitly declare not to send X.509 token in the SOAP request, but the request carry the X.509 token.
Action
Send SOAP request that conforms to the WS-Security policy.
1207
Security Error: SOAP request missing Username token required by security policy.
Description
A SOAP request arrived violated the WS-Security policy constraints of the web service. WS-Security policy require the SOAP request to carry Username token for authentication, but the request does not take the token.
Action
Send SOAP request that conforms to the WS-Security policy.
1208
Security Error: SOAP request missing Username/password-digest token required by security policy.
Description
A SOAP request arrived violated the WS-Security policy constraints of the web service. WS-Security policy require the SOAP request to carry Username/Password-Digest token for authentication, but the request does not take the token.
Action
Send SOAP request that conforms to the WS-Security policy.
1209
Security Error: SOAP request missing X.509 token required by security policy.
Description
A SOAP request arrived violated the WS-Security policy constraints of the web service. WS-Security policy require the SOAP request to carry X.509 token for authentication, but the request does not take the token.
Action
Send SOAP request that conforms to the WS-Security policy.
1210
Security Error: SOAP request does not sign the parts designated by security policy.
Description
A SOAP request arrived violated the WS-Security policy constraints of the web service. WS-Security policy require the SOAP request to be signed on specific parts, but the received request does not.
Action
Send SOAP request that conforms to the WS-Security policy.
1211
Security Error: Failed to map X.509 token to Tuxedo user for ACL check.
Description
If Tuxedo domain security attribute is configured to ACL or MANDATORY_ACL, and the inbound SOAP request carry only X.509 token, GWWS will invoke the credential mapping plugin to map the X.509 token to Tuxedo user. SALT provide a default implementation to map X.509 certificate common name to Tuxedo user name. Customers can implement their own plugin. The error message is issued when the plugin return failure in performing the mapping.
Action
Examine the X.509 token to Tuxedo User credential mapping plugin failure.
1212
Security Error: User 'user-name' mapped from X.509 certificate is not a valid Tuxedo user.
Description
If Tuxedo domain security attribute is configured to ACL or MANDATORY_ACL, and the inbound SOAP request carry only X.509 token, GWWS will invoke the credential mapping plugin to map the X.509 token to Tuxedo user. SALT provide a default implementation to map X.509 certificate common name to Tuxedo user name. Customers can implement their own plugin. The error message is issued when themapped user is not a valid Tuxedo user.
Action
Check if the credential mapping plugin correctly map the distinguished name of the X.509 certificate to a valid Tuxedo user.
1215
Security Error: Security policy has been violated.
Description
A SOAP request arrived violated the WS-Security policy constraints of the web service.
Action
Send SOAP request that conforms to the WS-Security policy.
1240
ERROR: Failed to open trusted certificate file file-path.
Description
This message is issued when GWWS failed to load the trusted certificate file at file-path.
Action
Check if the file exist; If the file exist, check if GWWS has the privilege to access the file.
1241
ERROR: PEM file file-name syntax error [ln lineno], expect 'BEGIN' tag instead of 'END' tag.
Description
The certificate file in PEM format is not correctly constructed. A certificate data body should be enclosed by "-----BEGIN CERTIFICATE-----" and "-----END CERTIFICATE-----" tags.
Action
Check if the certificate file is in correct format.
1242
ERROR: PEM file file-name [ln lineno, col column]: character is not Base64 character.
Description
A non-base64 character is found when GWWS is loading the certificate. The certificate data should include only base64 characters.
Action
Create correct certificates.
1243
ERROR: PEM file file-name [ln lineno]: The certificate is too big ( > 128KB ).
Description
GWWS detects the size of the loaded certificate is large than 128KB. GWWS rejects the certificate.
Action
Check if the certificate file is in correct PEM format.
1244
ERROR: PEM file file-name [ln lineno]: sytax error.
Description
GWWS detects syntax error in the certificate file when loading the file into memory.
Action
Check if the certificate file is in correct PEM format.
1245
ERROR: Unsupported certificate (internal error code error-code).
Description
The trusted certificate or files in certifcate path include certificates which are not supported by SALT. SALT support RSA and DSA X.509 certificates.
Action
Check if the certificate is a valid RSA or DSA X.509 certificate.
1246
ERROR: Memory allocation failure for write bitmap.
Description
Failed to allocate memory to write bitmap into transaction log.
Action
Install more memory to the system. If problem persist contacts Oracle support.
1247
ERROR: Can't locate free block in GWWS Transaction log.
Description
Transaction log is full.
Action
Increase the size of the maximum transaction in the deployment configuration file. If problem persists contact Oracel support.
1248
ERROR: Can't locate free block in GWWS Transaction log.
Description
Transaction log is full.
Action
Increase the size of the maximum transaction in the deployment configuration file. If problem persists contact Oracel support.
1249
ERROR: Memory allocation failure
Description
Failed to allocate memory while formatting transaction log record.
Action
Add more memory to the system. If problem persist contacts Oracle support.
1250
INFO: GWWS log page %d skipped, header checksum did not match
Description
The log page will not be used during transaction recovery processing most likely cause is the page is freed and reused by other transaction.
Action
Informational message, no action required.
1251
INFO: GWWS log not in an understandable format. Difference release.
Description
The log page examined is of different format. Must likely cause is that it is of different release.
Action
Information message, no action required.
1252
INFO: GWWS log page %d skipped, checksum did not match
Description
The log page will not be used during transaction recovery processing most likely cause is the page is freed and reused by other transaction.
Action
Informational message, no action required.
1253
ERROR: System clock has been reset to prior time. Reset again to time after latest_log_time.
Description
The system clock has been reset by system administrator.
Action
Reset the system clock to the time consistent with transction log.
1254
ERROR: Memory allocation failure
Description
Failed to allocate memory while processing transaction recovery.
Action
Add more memory to the system. If problem persist contacts Oracle support.
1255
ERROR: GWWS CONFIG log size, log_size, different from size of existing log.
Description
The maximum allowed number of transaction is changed causing it requres different log size than current transaction log size.
Action
If MaxTran been reduced then can ignore this message. However, if it is increase shutdown GWWS and delete the transaction log and then reboot GWWS.
1256
INFO: Warmstart processing transaction as coordinator
Description
A transaction has been recovered and GWWS is the transaction coordinator.
Action
Informational message, no action required.
1257
INFO: Warmstart processing transaction as subordinate
Description
A transaction has been recovered and GWWS is the subordinate to a network superior.
Action
Informational message, no action required.
1258
INFO: Warmstart processing transaction as subordinate to group group_id
Description
A transaction has been recovered and GWWS is the subordinate to a local TMS in the group group_id.
Action
Informational message, no action required.
1259
ERROR: _wstx_vlogEOT: wrong page number first_page/last_page
Description
The transaction page number is invalid for the transaction.
Action
Contact your Oracle support.
1260
ERROR: Can't open transaction log
Description
Unable to open the transaction log.
Action
Check to see if the transaction log and device is correctly configured.
1261
ERROR: TMS_TIMEOUT state tx_state
Description
The transaction timeout occurred at state tx_state.
Action
Contact your Oracle support.
1262
ERROR: Precommit found an invalid transaction state tx_state
Description
The transaction precommit processing found that transaction is in a invalid state tx_state.
Action
Contact your Oracle support.
1263
ERROR: Precommit found invalid state group group_id state tx_state
Description
The transaction precommit processing found that a participant of group group_id is in invalid state tx_state.
Action
Contact your Oracle support.
1264
ERROR: Group group_id at coordinator site received TMS_ABORT in state TMGREADY.
Description
The group group_id at coordinator siate receive TMS_ABORT in state TMGREADY.
Action
Contact your Oracle support.
1265
WARN: TMS_ABORT changing group group_id from TMGHCOMMIT to TMGABORTED
Description
The group group_id received TMS_ABORT so it changes its state from TMGHCOMMIT to TMGABORTED.
Action
A warning message, check the heuristically commit transaction and correct any inconsistent.
1266
ERROR: TMS_ABORT group group_id in state tx_state
Description
The TMS_ABORT message is received for group group_id in transaction state tx_state.
Action
Contact your Oracle support.
1267
ERROR: TMS_READY for missing group group_id
Description
Received TMS_READY message contains group group_id that is not known to be the transaction participant.
Action
Contact your Oracle support.
1268
ERROR: TMS_READY group group_id state tx_state
Description
The transaction participant group group_id is transaction state tx_state when it is expected in TMGREADY state.
Action
Contact your Oracle support.
1269
ERROR: TMS_READY found transaction state tx_state
Description
The TMS_READY message processing found transaction is the tx_state.
Action
Contact your Oracle support.
1270
ERROR: TMS_READONLY for messing group grp_id
Description
The TMS_READONLY message received with a participant group grp_id that is not know.
Action
Contact your Oracle support.
1271
ERROR: TMS_READONLY group grp_id state tx_state
Description
The TMS_READONLY message processing found the participant group grp_id is in transaction state tx_state.
Action
Contact your Oracle support.
1272
ERROR: TMS_READONLY found transaction state tx_state
Description
The TMS_READONLY message processing found the transaction is in state tx_state.
Action
Contact your Oracle support.
1273
ERROR: TMS_ABORTONLY transaction state tx_state
Description
The TMS_ABORTONLY message processing found transaction is in state tx_state.
Action
Contact your Oracle support.
1274
ERROR: TMS_DONE transaction state tx_state
Description
The TMS_DONE message processing found transaction is in state tx_state.
Action
Contact your Oracle support.
1275
WARN: Transaction return HEURISTIC HAZARD result
Description
A warning message telling that transaction became HEURISTIC HAZARD.
Action
User should check whether the outcome is consistent, and delete the transaction using wsadmin forgettran command to remove the transaction.
1276
WARN: Transaction return HEURISTIC MIX result
Description
A warning message telling that transaction became HEURISTIC MIX.
Action
User should check whether the outcome is consistent, and delete the transaction using wsadmin forgettran command to remove the transaction.
1277
WARN: aborttran aborted transacton
Description
The transaction is aborted.
Action
No action required.
1278
WARN: aborttran not allowed for TMGDECIDED transaction
Description
The transaction outcome already decided and it cannot be aborted.
Action
No action required.
1279
WARN: aborttran not allowed for TMGREADY transaction at coordiante site.
Description
The transaction can not be aborted at the coordinator's site what it is at TMGREADY state.
Action
No action required.
1280
WARN: aborttrans aboted group grp_id
Description
The abort transaction operation aborted the transaction at participant group grp_id.
Action
No action required.
1281
ERROR: Cannot generate empty buffer at (module.line).
Description
Cannot not allocate empty buffer to process heuristic commit.
Action
Contact your Oracle support.
1282
ERROR: Cannot lock Bulletin Board at (module.line)
Description
Failed to lock Bulletin Board at line number in module.
Action
Contact your oracle support.
1283
WARN: committran committed group grp_id
Description
The commit transaction operation committed transaction at group grp_id.
Action
No action required.
1284
ERROR: TMS_STATUS found transaction at state tx_state
Description
The TMS_STATUS message received at transaction state tx_state.
Action
Contact your Oracle support.
1285
WARN: aborttran all aborted transaction
Description
The abort transaction for all participants operation aborted the transaction.
Action
No action required.
1286
ERROR: TMS_MANAGE found transaction state tx_state
Description
The TMS_MANAGE received when at least one participant's state is at tx_state. It is expected to be in TMGACTIVE state.
Action
Contact your Oracle support.
1287
ERROR: TMS_COMMIT found transaction state tx_state
Description
The TMS_COMMIT received when at least one participant's state is at tx_state. It is expected to be in TMGREADY state.
Action
Contact your Oracle support.
1288
INFO: All groups are readonly
Description
All the participating groups are readonly.
Action
Informational message, no action required.
1289
ERROR: TMS_MANAGE found transaction state tx_state
Description
The TMS_MANAGE message processing found that at least one participating group is in state tx_state.
Action
Contact your Oracle support.
1290
ERROR: Found invalid TMS event evt_id
Description
TMS message processing found an unknown event evt_id.
Action
Contact your Oracle support.
1291
ERROR: Failed to set non-blocking priority to TMS request
Description
Unable to set TMS requsting message with a non-blocking priority.
Action
Contact your Oracle support.
1292
ERROR: Cannot sent to service "TMS" due to error err
Description
Cannot send to TMS message to other TMS server because of error err.
Action
Contact your Oracle support.
1293
ERROR: Failed to set non-blocking priority for TMS request
Description
Unable to set TMS requsting message with a non-blocking priority.
Action
Contact your Oracle support.
1294
ERROR: Cannot sent to service "TMS" due to error err
Description
Cannot send to TMS message to other TMS server because of error err.
Action
Contact your Oracle support.
1295
ERROR: TMS_COMMIT found transaction state tx_state
Description
The TMS_COMMIT message processing found that transaction is not at TMDECIDED state, instead it is at state tx_state.
Action
Contact your Oracle support.
1296
WARN: Transaction become HEURISTIC HAZARD
Description
A warning message telling that transaction became HEURISTIC HAZARD.
Action
User should check whether the outcome is consistent, and delete the transaction using wsadmin forgettran command to remove the transaction.
1297
WARN: Transaction return HEURISTIC MIX result
Description
A warning message telling that transaction became HEURISTIC MIX.
Action
User should check whether the outcome is consistent, and delete the transaction using wsadmin forgettran command to remove the transaction.
1298
ERROR: Invalid sendlist error
Description
The list of message receiver is not valid.
Action
Contact your Oracle support.
1299
ERROR: TMS_COMMIT found transaction state tx_state
Description
The TMS_COMMIT message processing found transaction is not at TMGDECIDED state, instead it is at tx_state.
Action
Contact your Oracle support.
1300
ERROR: Failed to allocate branch for transaction txid
Description
Failed to allocate a branch object for transaction txid.
Action
Contact your Oracle support.
 |
 |
 |