LIBSCA Messages 600-699
|
|
600
ERROR: Object not found
Description
An SDO runtime exception occurred in the getSDOValue message
Action
This exception will be enclosed within an SCA exception giving further information on the location of the error.
601
ERROR: Get value not available on many valued property: propertyname
Description
An SDO runtime exception occurred due to an attempt to retrieve the value of multi-valued property propertyname using a method that is valid only for single valued properties.
Action
This exception will be enclosed within an SCA exception giving further information on the location of the error.
602
ERROR: ATMI Binding - workStationParameters/encryptBits minimum encryption strength contains bad character
Description
The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. A character other than a digit was found among the characters before the slash.
Action
Fix the workStationParameters/encryptBits parameter to match the required syntax.
603
ERROR: ATMI Binding - workStationParameters/encryptBits maximum encryption strength contains bad character
Description
The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. A character other than a digit was found among the characters after the slash.
Action
Fix the workStationParameters/encryptBits parameter to match the required syntax.
604
ERROR: ATMI Binding - workStationParameters/encryptBits minimum encryption strength string too long
Description
The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. More than 3 digits were found before the slash, and this value is greater than any encryption strength supported by Tuxedo.
Action
Fix the workStationParameters/encryptBits parameter to match the required syntax.
605
ERROR: ATMI Binding - workStationParameters/encryptBits maximum encryption strength string too long
Description
The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits consist of only the digits 0 through 9. More than 3 digits were found after the slash, and this value is greater than any encryption strength supported by Tuxedo.
Action
Fix the workStationParameters/encryptBits parameter to match the required syntax.
606
ERROR: ATMI Binding - workStationParameters/encryptBits unsupported minimum encryption strength value minbits
Description
The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits must be 0, 40, 56, 128, or 256. An invalid value was specified for minbits.
Action
Specify a value of 0, 40, 56, 128, or 256 for minbits.
607
ERROR: ATMI Binding - workStationParameters/encryptBits unsupported maximum encryption strength value maxbits
Description
The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits and maxbits must be 0, 40, 56, 128, or 256. An invalid value was specified for maxbits.
Action
Specify a value of 0, 40, 56, 128, or 256 for maxbits.
608
ERROR: ATMI Binding - workStationParameters/encryptBits minimum encryption strength is stronger than maximum strength (minbits/maxbits)
Description
The workStationParmeters/encryptBits parameter must be of the form minbits/maxbits, where minbits must be less than or equal to maxbits. However, the value specified for minbits was greater than the value specified for maxbits.
Action
Fix the encryptBits parameter so that minbits is less than or equal to maxbits.
609
ERROR: Tuxedo service returned VIEW32 data but SCA return type typename is not DataObjectPtr
Description
A Tuxedo service invoked by SCA returned a VIEW32 buffer, but the datatype of the SCA signature for the service was typename instead of DataObjectPtr.
Action
Fix the SCA service definitions so that the return signature for this service is DataObjectPtr. (Alternatively, change the return type of the Tuxedo service to match the current SCA signature.)
610
ERROR: Tuxedo service returned VIEW, X_COMMON, or X_C_TYPE data but SCA return type typename is not DataObjectPtr
Description
A Tuxedo service invoked by SCA returned a VIEW, X_COMMON, or X_CTYPE buffer, but the datatype of the SCA signature for the service was typename instead of DataObjectPtr.
Action
Fix the SCA service definitions so that the return signature for this service is DataObjectPtr. (Alternatively, change the return type of the Tuxedo service to match the current SCA signature.)
611
ERROR: Cannot determine Tuxedo buffer type of input buffer for SCA method methodname
Description
The ATMI function tptypes(3) failed when invoked using the ATMI buffer that was to be sent to the SCA method methodname.
Action
Contact Oracle Technical Support.
See Also
tptypes(3)
612
ERROR: Tuxedo input buffer type typename not valid for SCA method methodname
Description
The Tuxedo buffer buffer of type typename that was to be sent to SCA methiod methodname is not of a valid type for that method.
Action
Check the SCA signatures for method methodname to determine the valid ATMI buffer type(s) for that method and fix the discrepancy.
613
ERROR: SCA service invocation error occurred
Description
A service invocation within an SCA server has failed. As a result, this service invocation will pass the TPFAIL flag to tpreturn(3).
Action
Refer to previous messages in the userlog to determine the specific cause of the error.
614
ERROR: SCA service invocation error occurred
Description
A service invocation within an SCA server has failed. As a result, this service invocation will pass the TPFAIL flag to tpreturn(3).
Action
Refer to previous messages in the userlog to determine the specific cause of the error.
615
ERROR: Fchg failed for field fieldname error fmlerror
Description
The Fchg(3) or Fchg32fieldname of type FLD_LONG.
Action
If fmlerror is FNOSPACE, ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Otherwise, contact Oracle Technical Support.
See Also
Fchg(3)
616
ERROR: Fchg failed for field fieldname error fmlerror
Description
The Fchg(3) or Fchg32fieldname of type FLD_LONG.
Action
If fmlerror is FNOSPACE, ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Otherwise, contact Oracle Technical Support.
See Also
Fchg(3)
617
ERROR: ATMI Binding - security principal password returned by callback too long
Description
The cleartext password returned by the function set by the setSCAPasswordCallback(3c) is over 31 characters in length.
Action
Fix the password callback function so that it returns a password within the allowable length.
See Also
setSCAPasswordCallback(3c)
618
ERROR: Cannot determine buffer type of return buffer from Tuxedo service svcname for SCA method methodname
Description
When invoking Tuxedo service svcname as part of SCA method methodname, the tptypes(3) function failed for the buffer returned by Tuxedo.
Action
Contact Oracle Technical Support.
See Also
tptypes(3)
619
ERROR: Buffer type buftype returned from Tuxedo service svcname not valid for SCA method methodname
Description
When invoking Tuxedo service svcname as part of SCA method methodname, the buffer type buftype returned by Tuxedo did not match one of the allowable types for the SCA signature.
Action
Fix the signature of the SCA service to recognize the type returned by Tuxedo. Alternatively, fix the type returned the Tuxedo service to match the SCA signature.
620
ERROR: Buffer type buftype returned on TPFAIL from Tuxedo service svcname not valid for SCA method methodname and configured buffer type errbuftype. Ignoring this buffer.
Description
When invoking Tuxedo service svcname as part of SCA method methodname, buffer type errbuftype returned on a service error, but this type does not match the configured error buffer type for the service.
Action
Fix the error buffer type defined for the SCA service to match the type returned by Tuxedo. Alternatively, fix the type returned by the Tuxedo service on error to match the configured type in SCA.
621
ERROR: Field fldname of type FLD_STRING has signature sig instead of expected signature string, char*, or char[]
Description
A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match one of the allowable signatures for FLD_STRING.
Action
Fix the incorrect SCA signature.
622
ERROR: Field fldname of type FLD_CARRAY has signature sig/var> instead of expected signature struct carray_t*
Description
A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match the allowable signature for FLD_CARRAY.
Action
Fix the incorrect SCA signature.
623
ERROR: Field fldname of type FLD_CHAR has signature sig instead of expected signature char or bool
Description
A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match one of the allowable signatures for FLD_CHAR.
Action
Fix the incorrect SCA signature.
624
ERROR: Field fldname of type FLD_MBSTRING has signature sig instead of expected signature std::wstring, wchar_t*, or wchar_t[]
Description
A Tuxedo client invoked an SCA service with field fldname but the corresponding SCA signature sig did not match one of the allowable signatures for FLD_MBSTRING.
Action
Fix the incorrect SCA signature.
625
ERROR: Value longval of field TUX_RTNLONG is outside the range of SCA return parameter of type int
Description
A Tuxedo service returned a long integer value in field TUX_RTNLONG which could not fit in the corresponding SCA parameter of type int.
Action
Use long instead of int for the SCA parameter.
626
ERROR: Value unsignedlongval of field TUX_RTNLONG is outside the range of SCA return parameter of type unsigned int
Description
A Tuxedo service returned a long integer value in field TUX_RTNLONG which, when considered as an unsigned long, could not fit in the corresponding SCA parameter of type unsigned int.
Action
Use unsigned long instead of unsigned int for the SCA parameter.
627
ERROR: SCA interface return data type typename is not allowed
Description
An SCA interface returned a value of a type typename that is not allowed in SALT.
Action
Fix the return type of the SCA service.
628
ERROR: Output buffer type outtype incompatible with return signature rtnsig
Description
The output buffer of type outtype received from Tuxedo is incompatbile with the SCA return buffer signature rtnsig.
Action
Fix the SCA return buffer signature or the return type of the Tuxedo service so that they are compatible.
629
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
630
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
631
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
632
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
633
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
634
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
635
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
636
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
637
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
638
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
639
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
640
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
641
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
642
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
643
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
644
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
645
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
646
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
647
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
648
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
649
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
650
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
651
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
652
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
653
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
654
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
655
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
656
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
657
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
658
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
659
ERROR: Cannot set LC_CTYPE locale to locale or to its alternate altlocale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale and also failed when setting the LC_CTYPE locale to the alternate locale altlocale defined for this locale in the $TUXDIR/locale/setlocale_alias file.
Action
Ensure that the locale corresponding to locale in the $TUXDIR/locale/setlocale_alias file is one that is recognized by the operating system.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
660
ERROR: Cannot set LC_CTYPE locale to locale
Description
The C++ library function setlocale() failed when setting the LC_CTYPE locale to locale. There was no alias defined for this locale.
Action
Since the locale names used by Tuxedo internationalized character set support and operating system internationalized character set support sometimes differ, you may want to create an alias for locale in the $TUXDIR/locale/setlocale_alias file. This can be done by adding a line with locale followed by whitespace followed by an alternate name by which this locale is known in the operating system libraries.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
661
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
662
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
663
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
664
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
665
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
666
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
667
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
668
ERROR: Wide character to multibyte string conversion failed
Description
Wide character to multibyte string conversion using the wcstombs failed.
Action
Ensure that the wide character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
669
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
670
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
671
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
672
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
673
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
674
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
675
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
676
ERROR: Multibyte string to wide character conversion failed
Description
Multibyte string to wide character conversion using the mbstowcs function failed.
Action
Ensure that the multibyte character data used consists of only valid characters for the current locale.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
677
ERROR: Cannot convert from Operation::WCHARS parameter to type
Description
An attempt to convert an operation parameter declared wchar_t[] or wchar_t* to type type has been detected. This is an invalid conversion.
Action
Check that the field table settings and operation method declaration are compatible.
See Also
Oracle SALT Programming Guide
678
ERROR: Cannot convert from Operation::WSTRING parameter to type
Description
An attempt to convert an operation parameter declared wchar_t[] or wchar_t* to type type has been detected. This is an invalid conversion.
Action
Check that the field table settings and operation method declaration are compatible.
See Also
Oracle SALT Programming Guide
679
ERROR: Memory allocation error
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed while allocating memory for multibyte string data.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
680
ERROR: Memory allocation error
Description
An attempt dynamically to allocate memory from the operating system using malloc() failed while allocating memory for multibyte string data.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
681
ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
Description
An attempt to pack multibyte string data using the Fmbpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
682
ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
Description
An attempt to pack multibyte string data using the Fmbpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
683
ERROR: Fmbpack32 of FLD_MBSTRING field fldname failed with error fmlerror
Description
An attempt to pack multibyte string data into field fldname using the Fmbpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
684
ERROR: Fmbpack32 of FLD_MBSTRING field fldname failed with error fmlerror
Description
An attempt to pack multibyte string data into field fldname using the Fmbpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
685
ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
Description
An attempt to pack multibyte string data using the Fmbpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
686
ERROR: Fmbpack32 of FLD_MBSTRING buffer failed with error fmlerror
Description
An attempt to pack multibyte string data using the Fmbpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
687
ERROR: Fmbunpack32 of FLD_MBSTRING field failed with error fmlerror
Description
An attempt to unpack multibyte string data using the Fmbunpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
688
ERROR: Fmbunpack32 of FLD_MBSTRING field failed with error fmlerror
Description
An attempt to unpack multibyte string data using the Fmbunpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
689
ERROR: Fmbunpack32 of FLD_MBSTRING field failed with error fmlerror
Description
An attempt to unpack multibyte string data using the Fmbunpack32>(3) function failed.
Action
Examine fmlerror to determine the specific action to take.
See Also
Multibyte String Data Mapping in the Oracle SALT Programming Guide.
690
ERROR: ATMI Binding - buftype output buffer not supported in this release
Description
Output buffer type buftype is not supported in this release of SALT SCA.
Action
Change the SCA and/or Tuxedo code to use a supported buffer type as documented in the Oracle SALT Programming Guide.
See Also
Oracle SALT Programming Guide
691
ERROR: Empty input data
Description
Empty FLD_MBSTRING input data was found for the SALT SCA Web Services binding.
Action
Do not use empty FLD_MBSTRING data in the SALT SCA Web Services binding.
692
Types mismatch for field fldname
Description
A type other than SCA Type::BytesType was found corresponding to FLD_CARRAY field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
693
Types mismatch for field fldname
Description
A type other than SCA Type::IntegerType or Type::StringType was found corresponding to FLD_STRING field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
694
Types mismatch for field fldname
Description
A type other than SCA Type::LongType, Type::IntegerType, or Type::StringType was found corresponding to FLD_LONG field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
695
Types mismatch for field fldname
Description
A type other than SCA Type::ShortType was found corresponding to FLD_SHORT field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
696
Types mismatch for field fldname
Description
A type other than SCA Type::ByteType or Type::BooleanType was found corresponding to FLD_CHAR field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
697
Types mismatch for field fldname
Description
A type other than SCA Type::DoubleType was found corresponding to FLD_DOUBLE field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
698
Types mismatch for field fldname
Description
A type other than SCA Type::FloatType was found corresponding to FLD_FLOAT field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
699
Types mismatch for field fldname
Description
A type other than SCA Type::StringType was found corresponding to FLD_MBSTRING field fldname.
Action
Fix the SCA service signature so it is compatible with the Tuxedo service data.
 |
 |
 |