CMDTUX Messages 6700-6799
6701
ERROR: Current working directory path name is too long
Description
While executing tmloadrepos
, an attempt to get the current working directory path failed. This can indicate that either the directory pathname is greater than MAXTLSTRING
characters in length or that the directory hierarchy is not readable.
Action
Check that the directory hierarchy has the proper permissions and is not longer than MAXTLSTRING
characters, and re-execute the command.
6702
ERROR: Cannot obtain absolute repository input file path
Description
While executing tmloadrepos
, an attempt to get the absolute repository input file path failed. This file is given as an argument in the -i
command line option, which can either be an absolute path or a relative path.
Action
Check that a valid repository input file path is given, and re-execute the command.
See Also
tmloadrepos
(1)
6703
ERROR: Absolute repository input file path is too long
Description
The length of the absolute repository input file path name is greater than MAXTLSTRING
. This file is given as an argument in the -i
command line option.
Action
Specify a shorter path name.
See Also
tmloadrepos
(1)
6704
ERROR: Repository file must be specified
Description
While executing tmloadrepos
, repository file path was not included.
Action
Specify a repository file path in the command line.
See Also
tmloadrepos
(1)
6705
ERROR: Cannot obtain absolute repository file path
Description
While executing tmloadrepos
, an attempt to get the absolute repository file path failed. This file is given as an argument without a command line option. It can either be an absolute path or a relative path.
Action
Check that a valid repository file path is given, and re-execute the command.
See Also
tmloadrepos
(1)
6706
ERROR: Absolute repository file path is too long
Description
The length of the absolute repository path name is greater than MAXTLSTRING
. This file is given as an argument without a command line option.
Action
Specify a shorter path name.
See Also
tmloadrepos
(1)
6707
ERROR: Cannot use the -e and -d options together
Description
The -e
and -d
options used in tmloadrepos
are mutually exclusive. The -e
option is used to replace all pre-existing repository information. The -d
option is used to delete specified service(s) from the repository.
Action
Change the arguments in the tmloadrepos
command so that the -e
and -d
options are not both specified and re-execute the command.
See Also
tmloadrepos
(1)
6708
ERROR: Cannot use the -i and -d options together
Description
The -i
and -d
options used in tmloadrepos
are mutually exclusive. The -i
option is used to specify an input file for creating and loading service information to a new repository or to modify an existing one. The -d
option is used to delete specified service(s) from an existing repository.
Action
Change the arguments in the tmloadrepos
command so that the -i
and -d
options are not both specified and re-execute the command.
See Also
tmloadrepos
(1)
6709
ERROR: Service list string cannot be greater than MAXTLSTRING characters
Description
The service list string is given as an argument in the -d
command line option. If more than one service is deleted, use character ',' as the separator. The length of the service list string is greater than MAXTLSTRING
.
Action
Specify fewer services to delete from the repository.
See Also
tmloadrepos
(1)
6710
Usage: tmloadrepos [-e | -d service1[,...]] [-y] [-i repository_input] repository_file
Description
Invalid use of tmloadrepos
.
Action
Follow the "Usage:" hint.
See Also
tmloadrepos
(1)
6711
ERROR: filename is a Jolt repository file or an old format metadata repository file
Description
The given repository is a Jolt repository file or an old format metadata repository file which cannot be modified with tmloadrepos
directly.
Action
Check that the correct repository file path is given, and re-execute the command.
A Jolt repository file or an old format metadata repository file cannot be modified directly. You may first use tmunloadrepos
to unload the text version service metadata definition from the given repository file and then load a new binary metadata repository file with tmloadrepos
.
See Also
tmloadrepos
(1), tmunloadrepos
(1)
6712
ERROR: Repository file filename does not exist
Description
While executing tmloadrepos
to delete services, the given repository file does not exist.
Action
Check that the repository file path points to a valid existing file, and re-execute the command.
6713
ERROR: Repository file filename has invalid format
Description
tmloadrepos
detected the given repository file exists, but is in an invalid format.
Action
Check that the correct repository file path points to a properly formatted file. Make sure that the repository file is not corrupt and re-execute the command.
6714
ERROR: Memory allocation error when opening repository file filename
Description
An attempt to dynamically allocate memory from the operating system using calloc()
failed while opening the specified repository file.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine.
6715
ERROR: Error reading repository file filename
Description
An attempt to read the repository file failed while deleting specified services using tmloadrepos
. The error might be a system disk IO error, a dynamic memory allocation error, or a corrupt repository file.
Action
Make sure the operating system parameters are set correctly for the file IO and the working directory hierarchy has the right permissions for the existing file. Make sure the operating system parameters are set correctly for the amount of memory required. Make sure the repository file is not corrupt.
6716
ERROR: Error creating repository file filename
Description
While executing tmloadrepos
, the specified repository file does not exist. An attempt to create a new repository file failed. The error might be a system disk IO error or a dynamic memory allocation error.
Action
Make sure the operating system parameters are set correctly for the file IO and the working directory hierarchy has the right permissions to create a binary file. Make sure the operating system parameters are set correctly for the amount of memory required.
6717
ERROR: Error creating temporary repository file filename
Description
While executing tmloadrepos
with -e
option, an attempt to create a temporary repository file failed. The error might be a system disk IO error or a dynamic memory allocation error.
Action
Make sure the operating system parameters are set correctly for the file IO and the working directory hierarchy has the right permissions to create a binary file. Make sure the operating system parameters are set correctly for the amount of memory required.
6718
ERROR: Error reading repository input file filename
Description
An attempt to access specified repository input file failed.
Action
Check if the repository file exists with the correct permissions and normal status.
6719
ERROR: Error creating new repository file filename
Description
While executing tmloadrepos
, the specified repository file does not exist. An attempt to creat the repository file failed. The error might be a system disk IO error or a dynamic memory allocation error.
Action
Make sure the operating system parameters are set correctly for the file IO and the working directory hierarchy has the correct permissions to create a binary file. Make sure the operating system parameters are set correctly for the amount of memory required.
6720
INFO: Service servicename deleted...
Description
Service deletion prompt.
Action
None.
6721
INFO: Service servicename not found...
Description
Service not found prompt.
Action
None.
6722
INFO: Service servicename delete error...
Description
Service deletion failed prompt.
Action
None.
6723
ERROR: Memory allocation error when parsing the service input file
Description
An attempt to dynamically allocate memory from the operating system using calloc()
failed when reading and parsing service definitions from the repository input file.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine.
6724
ERROR: Repository input file filename does not exist
Description
The specified repository input file does not exist.
Action
Check that the repository input file path points to a valid existing file and re-execute the command.
6725
ERROR: Repository file filename is locked by another program
Description
tmloadrepos
detected another METADATA utility is using the specified repository file. The utility might be a TMMETADATA
(5) server, a tmunloadrepos
(1) command, another tmloadrepos
(1) command or a customer program written with ATMI functions tpgetrepos
(3c)/tpsetrepos
(3c).
Action
Check all other utilities that are using the specified repository file. Wait for them to quit and then re-execute the command.
6726
ERROR: Cannot obtain absolute .SCD service output file path
Description
While booting TMMETADATA
server process, an attempt to get the absolute service contract discovery output file path failed. This file is given as an argument with the -o
option. It can either be an absolute path or a relative path.
Action
Make sure a valid service contract discovery output file path is given to configure TMMETADATA
(5) and then reboot the application.
See Also
TMMETADATA
(5)
6727
ERROR: Absolute .SCD output file path is too long
Description
The length of absolute service contract discovery output file path name is greater than MAXTLSTRING
. This file is given as an argument with the -o
option in the TUXCONFIG
file to configure TMMETADATA
(5).
Action
Specify a shorter path name.
See Also
TMMETADATA
(5)
6728
ERROR: Open .SCD output file filename failure
Description
TMMETADATA
failed to create and open the specified service contract discovery output file for writing.
Action
Check that the directory for the output file exists and has write and execute permissions set correctly.
See Also
TMMETADATA
(5)
6730
ERROR: Cannot read predefined FML field when opening repository file filename
Description
An attempt to read predefined FML fields failed when opening repository. The predefined FML fields used by metadata repository are located in the $TUXDIR/udataobj/tpadm
file.
Action
Make sure environment variable TUXDIR
is set correctly and $TUXDIR/udataobj/tpadm can be accessed.
See Also
METAREPOS
(5)
6731
ERROR: Current working directory path name is too long
Description
While executing tmunloadrepos
, an attempt to get the current working directory path failed. This can indicate that either the directory pathname is greater than MAXTLSTRING
characters in length or that the directory hierarchy is not readable.
Action
Check that the directory hierarchy has the proper permissions and is not longer than MAXTLSTRING
characters, and re-execute the command.
6732
ERROR: Repository file must be specified
Description
While executing tmunloadrepos
, repository file path was not included.
Action
Specify a repository file path to the command line.
See Also
tmunloadrepos
(1)
6733
ERROR: Cannot obtain absolute repository file path
Description
While executing tmunloadrepos
, an attempt to get the absolute repository file path failed. This file is given as an argument with no command line option, which can be either a absolute path or or a relative path.
Action
Check that a valid repository file path is given, and re-execute the command.
See Also
tmunloadrepos
(1)
6734
ERROR: Absolute repository file path is too long
Description
The length of the absolute repository path name is greater than MAXTLSTRING
. This file is given as an argument without a command line option. It can either be an absolute path or a relative path.
Action
Specify a short path name.
See Also
tmunloadrepos
(1)
6735
ERROR: Cannot use the -option1 and -option2 options together
Description
While executing tmunloadrepos
, the -t
, -w
and -c
options can be used to specify output format of tmunloadrepos
. These three options are mutually exclusive.
Action
Change the arguments in the tmunloadrepos
command so that the -t
, -w
and -c
options are not specified simultaneously and re-execute the command.
See Also
tmunloadrepos
(1)
6736
ERROR: The service regular expression list cannot be greater than MAXTLSTRING characters
Description
The service regular expression list is given as an argument in the -s
command line option. If more than one service regular expression is specified, use character ',' as the separator. The length of the list is greater than MAXTLSTRING
.
Action
Specify a smaller service regular expression list.
See Also
tmunloadrepos
(1)
6737
Usage: tmunloadrepos [-s service_regular_expression1[,...]] [-t|-c] repository_file
Description
Invalid usage of tmunloadrepos
.
Action
Follow the "Usage:" hint.
See Also
tmunloadrepos
(1)
6738
ERROR: Repository file filename does not exist
Description
tmunloadrepos
detected the given repository file does not exist.
Action
Check that the repository file path points to a valid existing file, and re-execute the command.
6739
ERROR: Repository file filename has invalid format
Description
tmunloadrepos
detected the given repository file exists but is in an invalid format.
Action
Check that the repository file path points to a properly formatted, valid existing file. Make sure that the repository file is not corrupt and re-execute the command.
6740
ERROR: Memory allocation error when opening repository file filename
Description
An attempt to dynamically allocate memory from the operating system using calloc()
failed while opening the specified repository file.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine.
6741
ERROR: Error reading repository file filename
Description
An attempt to read the repository file failed while executing tmunloadrepos
. The error might be a system disk IO error, a dynamic memory allocation error, or a corrupt repository file.
Action
Make sure the operating system parameters are set correctly for the file IO and the working directory hierarchy has the correct permissions for the existing file. Make sure the operating system parameters are set correctly for the amount of memory required. Make sure the repository file is not corrupt.
6742
ERROR: Memory allocation error when unloading service information
Description
An attempt to dynamically allocate memory from the operating system using calloc()
failed when preparing memory for unloading service information from the repository file.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine.
6743
ERROR: Memory allocation error when reading service servicename
Description
An attempt to dynamically allocate memory from the operating system using calloc()
failed when reading service servicename from the repository file.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine.
6744
ERROR: Service servicename information may be corrupt
Description
tmunloadrepos
detected the service servicename information stored in the repository is corrupt.
Action
Use tmloadrepos
to reload the correct service servicename information into the repository.
See Also
tmloadrepos
(1)
6745
ERROR: Service servicename information is illegal
Description
tmunloadrepos
detected that the service servicename information is illegal. The repository file may be corrupt.
Action
Use tmloadrepos
to reload the correct service servicename information into the repository.
See Also
tmloadrepos
(1)
6746
ERROR: No matching services in repository file filename
Description
Cannot find any service in the repository file with the specified service regular expression.
Action
Change the service regular expression and re-execute the command.
6747
ERROR: '-opt' option is not supported by tmunloadrepos
Description
-opt option is not supported by tmunloadrepos
. The valid options are -t, -w and -c.
Action
Use one of the following options: -t, -w and -c for service output.
See Also
tmunloadrepos
(1)
6748
ERROR: XML generator initialization failed: detail-msg
Description
An attempt to initialize XML DOM tree generator failed, see detail-msg for further information. This may be caused by a memory allocation error or a Xerces library internal error.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. See Xerces reference for other Xerces errors.
6749
ERROR: XML generator initialization failed: DOM Exception code is errcode
Description
An attempt to initialize XML DOM tree generator failed, see errcode for further information. Xerces library throws a DOM Exception.
Action
See Xerces reference for DOM Exception.
6750
ERROR: Adding service(servicename) to DOM Tree failed
Description
An attempt to add service servicename information into a Xerces DOM Tree failed. This error is generated by Xerces Library.
Action
Use another service regular expression and re-execute the command. If the problem persists, contact BEA Customer Support.
6751
ERROR: Creating XML output failed: detail-msg
Description
An attempt to initialize XML output generator failed, see detail-msg for further information. This may be caused by a memory allocation error or a Xerces library internal error.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory and/or swap space on the machine. See Xerces reference for other Xerces error.
6752
ERROR: Creating XML output failed: DOMException code is : errcode
Description
An attempt to create XML output generator failed, see errcode for further information. Xerces library throws a DOM Exception.
Action
See Xerces reference for DOM Exception.
6753
ERROR: Error setting read-locking occurred when opening repository file filename
Description
tmunloadrepos
detected another tmloadrepos
program is using the same repository file.
Action
Wait for the tmloadrepos
program to quit and then re-execute the command.
6754
ERROR: System error when opening repository file filename
Description
While executing tmunloadrepos
, an unknown system error is encountered when opening the repository file.
Action
Contact BEA Customer Support.
6755
ERROR: Error setting read-locking occurred when reading repository file filename
Description
While executing tmunloadrepos
, an attempt to set read-locking to the repository file failed. Another METADATA program is using the same repository file.
Action
Check and stop all abnormal utilities that are accessing the repository file and then re-execute the command.
6756
WARN: Current working directory path name is too long
Description
While booting the TMMETADATA
process, an attempt to get the current working directory path failed. This can indicate that either the directory pathname is greater than MAXTLSTRING
characters in length or that the directory hierarchy is not readable.
Action
Make sure that the directory hierarchy has the proper permissions and is not longer than MAXTLSTRING
characters. Reboot the application.
6757
ERROR: Cannot obtain absolute repository file path
Description
While booting TMMETADATA
server process, an attempt to get the absolute repository file path failed. This file is given as an argument with the -f
option. It can either be an absolute path or a relative path.
Action
Make sure a valid repository file path is given to configure TMMETADATA
(5) and then reboot the application.
See Also
TMMETADATA
(5)
6758
ERROR: Absolute repository file path is too long
Description
The length of absolute repository file path name is greater than MAXTLSTRING
. This file is given as an argument with the -f
option in the TUXCONFIG
file to configure TMMETADATA
(5).
Action
Specify a shorter path name.
See Also
TMMETADATA
(5)
6759
WARN: Invalid command line argument 'opt' ignored
Description
Invalid option is given in the TUXCONFIG
file to configure TMMETADATA
.
Action
Modify the TUXCONFIG
file and then reboot the application.
See Also
TMMETADATA
(5)
6760
ERROR: -f
option is not specified
Description
The -f option was not specified when configuring TMMETADATA
in the TUXCONFIG
file.
Action
Modify the TUXCONFIG
file, specify the repository file path with -f option to TMMETADATA
(5) and then reboot the application.
See Also
TMMETADATA
(5)
6761
ERROR: Repository file filename does not exist
Description
TMMETADATA
detected the given repository file path points to a non-existing file.
Action
Modify the TUXCONFIG
file, make sure the repository file path points to a valid existing file and then reboot the application.
See Also
TMMETADATA
(5)
6762
ERROR: Repository file filename has invalid format
Description
TMMETADATA
detected the given repository file exists, but is in an invalid format.
Action
Modify the TUXCONFIG
file, make sure the repository file path points to a valid existing file and then reboot the application.
See Also
TMMETADATA
(5)
6763
ERROR: System error when opening repository file filename
Description
An unknown system error was encountered when TMMETADATA
opens the repository file.
Action
Contact BEA Customer Support.
6764
ERROR: A TMMETADATA server with write permission is running, the TMMETADATA server with read-only permission cannot boot
Description
An attempt to boot a TMMETADATA
server with read-only permission failed because another TMMETADATA
process with write permission is running.
Action
Modify the TUXCONFIG
, configure all TMMETADATA
servers with the same read or write permission.
See Also
TMMETADATA
(5)
6765
WARN: Cannot advertise .REPROLOCK service
Description
An attempt to advertise .REPROLOCK
service failed.
Action
Shutdown application, reconfigure the UBBCONFIG
by increasing MAXSERVICES
and MAXACCESSES
. Then try to reboot. If the problem persists, contact BEA Customer Support.
See Also
UBBCONFIG
(5)
6766
ERROR: A TMMETADATA server with read-only permission is running, the TMMETADATA server with write permission cannot boot
Description
An attempt to boot the TMMETADATA
server with write permission failed because another TMMETADATA
process with read-only permission is running.
Action
Modify the TUXCONFIG
, configure all TMMETADATA
servers with the same read or write permission.
See Also
TMMETADATA
(5)
6767
WARN: Cannot advertise .REPWRLOCK service
Description
An attempt to advertise .REPWRLOCK
service failed.
Action
Shutdown application, reconfigure the UBBCONFIG
by increasing MAXSERVICES
and MAXACCESSES
. Then try to reboot. If the problem persists, contact BEA Customer Support.
See Also
UBBCONFIG
(5)
6768
ERROR: Cannot advertise .TMMETAREPOS service
Description
An attempt to advertise .TMMETAREPOS service failed.
Action
Shutdown application, reconfigure the UBBCONFIG
by increasing MAXSERVICES
and MAXACCESSES
. Then try to reboot. If the problem persists, contact BEA Customer Support.
See Also
UBBCONFIG
(5)
6769
INFO: TMMETADATA server started with repository file filename
Description
The TMMETADATA
boot was started successfully.
Action
None.
6770
INFO: TMMETADATA tpsvrdone complete
Description
The TMMETADATA
server has shutdown successfully.
Action
None.
6771
ERROR: Invalid operation (TA_OPERATION) specified for METAREPOS request
Description
An invalid generic MIB field TA_OPERATION
value is set in a METAREPOS
request.
Action
Set one of the following three values: GET/SET/GETNEXT.
See Also
MIB
(5),METAREPOS
6772
ERROR: Repository file filename is a Jolt repository file or an old format metadata repository file
Description
The TMMETADATA
process with write permission detected the given repository file is a Jolt repository file or an old format metadata repository file.
Action
Modify the UBBCONFIG
, change the repository file to a new format metadata repository file or change the TMMETADATA
as a process with read-only permission.
See Also
TMMETADATA
(5)
6773
ERROR: .TMMETAREPOS only has read permission to the repository file
Description
A METAREPOS
set operation failed. This may be caused by either the TMMETADATA process being a read-only permission process or the specified repository file is a Jolt repository file.
Action
A Jolt repository file cannot be modified using Service Metadata Repository utilities.
To modify a metadata repository file, please change the TMMETADATA
server section to have write permission in the TUXCONFIG
file.
See Also
TMMETADATA
(5)
6774
ERROR: Error reading repository file filename
Description
An attempt to read the repository file failed when TMMETADATA
server was booting. The error may be a system disk IO error, a dynamic memory allocation error or a corrupt repository file.
Action
Make sure the operating system parameters are set correctly for the file IO and the working directory hierarchy has the correct permissions for the existing file. Make sure the operating system parameters are set correctly for the amount of memory required. Make sure the repository file is not corrupt.
6775
ERROR: Repository file filename is locked by another program
Description
While booting the TMMETADATA
server, another tmloadrepos
program using the same repository file was detected.
Action
Wait for the tmloadrepos
program to quit and then reboot the application.
6776
ERROR: Repository file is locked by another program
Description
While TMMETADATA
server is processing a request, an attempt to set read-locking to the repository file failed. Another tmloadrepos
program is using the same repository file.
Action
Check all abnormal utilities that are modifying the repository file and stop them. Then try to resend the request to TMMETADATA
.
6777
ERROR: System error when synchronizing repository file information
Description
While TMMETADATA
server was processing a request, an unknown system error was encountered when reading the repository file.
Action
Try to resend the request to .TMMETAREPOS
. If the problem persists, contact BEA Customer Support.
6778
ERROR: Cannot read predefined FML field
Description
An attempt to read predefined FML fields failed when opening repository in TMMETADATA
server. The predefined FML fields used by metadata repository are located in the $TUXDIR/udataobj/tpadm
file.
Action
Make sure environment variable TUXDIR
is set correctly and $TUXDIR/udataobj/tpadm can be accessed.
See Also
METAREPOS
(5)