LIBTUX Messages 6300-6399
6300
WARN: RM associated with this multi-threaded server does not support xa_end(TMMIGRATE), Transactions may not work correctly
Description
This message is issued when a multi-threaded server is started. If the RM
associated with this server does not support the TMMIGRATE flag when calling
xa_end()
then transactions may not work properly.
Action
Contact your BEA TUXEDO system Technical Support or your database system vendor.
The database system documentation may contain more information about
what flags can be used with the xa_end()
call.
6301
ERROR: Custom configuration error, error code val
Description
Failed to set server custom configuration information.
Action
This is an internal error, please contact customer support.
6302
ERROR: Memory allocation failed!
Description
An attempt to dynamically allocate memory from the operating system failed.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
6303
WARN: MAXQUEUELEN parameter is invalid with PER_REQUEST concurrency strategy, it will be ignored.
Description
The optonal MAXQUEUELEN server parameter is specified for a CORBA server with concurrency strategy set to PER_REQUEST. This parameter is only valid for a CORBA server with concurrency strategy set to PER_OBJECT. This parameter will be ignored at runtime.
Action
Remove this parameter from the offending server entry in the UBBCONFIG file.
6304
WARN: MAXQUEUELEN parameter is invalid with TUXEDO server, it will be ignored.
Description
The optional MAXQUEUELEN server parameter is specified for a TUXEDO server. This parameter only valid for a CORBA server with concurrency strategy set to PER_OBJKECT. This parameter will be ignored at runtime.
Action
Remove this parameter from the offending server entry in the UBBCONFIG file.
6305
ERROR: Fatal! Failed to select an inactive thread, corruption suspected, shutting server down!
Description
The system detected a fatal error while trying to select an inactive thread from the thread pool that is configured in a multi-threaded server.
Action
This message is supplied when the server has found a condition which does not al low the server to continue operation. The most common cause is corrupted memory, but other conditions could also cause this behavior. The server will shut itself down. If you believe that the memory in the server has not been corrupted, contact your BEA TUXEDO system Technical Support.
6306
ERROR: Fatal! Failed to allocate memory for message queue element, shutting server down!
Description
An attempt to dynamically allocate memory from the operating system failed while trying to create a queue element for storing messages destined for an active thread in a multi-threaded server.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
6307
ERROR: The -L option is valid only for RPC (non-conversational) servers running in SHM mode with load balancing.
Description
In order to use the server pool option -L, the server must not be a conversational server.
Action
Make sure the server is not conversational by specifying CONV=N in
the SERVERS
section of the UBBCONFIG file for the affected server.
Make sure the application is running in SHM mode. Remember that SHM
mode applications should have no NETWORK
section
in the UBBCONFIG file and should have MODEL set to SHM.
Turn load balancing on in the application by specifying LDBAL to Y in the
RESOURCES section of the UBBCONFIG file.
See Also
servopts
(5)
6309
WARN: Access control violation - unknown user on LMID tried to access acl_type target
Description
A client attempted to access a service, event, or queue for which it was not granted access via an access control list. The machine logical name LMID type of controlled resource acl_type and operation target target are printed.
Action
No action required. The access fails with an error and an event is generated. Further action may be required on the part of the security administrator.
6310
INFO: .SysACLPerm: unknown user on LMID tried to access acl_type target
Description
A client attempted to access a service, event, or queue for which it was not granted access via an access control list. An event is generated giving the machine logical name LMID type of controlled resource acl_type and operation target target.
Action
No action required. The access fails with an error and an event is generated. Further action may be required on the part of the security administrator.
6311
ERROR: tpcall(authsvc) failed in init_sec_context, error
Description
The native client or server was not able to initialize the security context with the authentication server. The error was error.
Action
Contact your AAA (authentication, authorization, auditing) security service provider. If you are using the default AAA security service from BEA, contact BEA Customer Support. Report error to technical support.
6312
ERROR: Invalid plugin size token passed:tokensize
Description
In user defined security plugin, The input tolen size is chagned
Action
If you are using the default AAA security service from BEA, contact BEA Customer Support.
6313
WARN: Bulletin Board update error error_val
Description
The BEA TUXEDO system attempted to update the server table that resides in system shared memory. The update was not successful. Either the server information provided was invalid, or an attempted lock on the TUXEDO System/T bulletin board was unsuccessful.
Action
Contact your BEA TUXEDO system Technical Support
6314
ERROR: Invalid message found, diagnostic=num1/num2/0xnum3/0xnum4/num5
Description
The BEA TUXEDO system data deserialization encountered an unexpected condition.
Action
Contact your BEA TUXEDO system Technical Support
6315
ERROR: Target codeset encoding name not defined in TPMBENC environment variable
Description
The TPMBENC environment variable was not defined in the process environment.
Action
Check to make sure TPMBENC is correctly defined wherever codeset encoding conversion is expected.
6316
ERROR: Memory allocation failure during codeset encoding conversion.
Description
An attempt dynamically to allocate memory from the operating system failed during an MBSTRING codeset encoding conversion attempt.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
6317
ERROR: Memory allocation failure during codeset encoding conversion.
Description
An attempt dynamically to reallocate memory from the operating system failed during an MBSTRING codeset encoding conversion attempt.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
6318
WARN: TMNOTHREADS conflicts with BRTHREADS, ignoring TMNOTHREADS
Description
This is informational, but categorized as a warning to highlight that if the TMNOTHREADS environment variable is set in conflict with BRTHREADS, TMNOTHREADS will have no effect on whether the BRIDGE operates in threaded mode or not.
Action
No action required.
See Also
tuxenv
(5)
6319
ERROR: Memory allocation failure during codeset encoding conversion.
Description
An attempt dynamically to reallocate memory from the operating system failed during an MBSTRING codeset encoding conversion attempt.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
6320
ERROR: Memory allocation failure during codeset encoding conversion.
Description
An attempt dynamically to allocate memory from the operating system failed during an FLD_MBSTRING codeset encoding conversion attempt.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
6321
ERROR: Memory allocation failure during codeset encoding conversion.
Description
An attempt dynamically to reallocate memory from the operating system failed during an FLD_MBSTRING codeset encoding conversion attempt.
Action
Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
6322
ERROR: encoding_name not found in list of valid codeset encoding names
Description
The encoding contained in TPMBENC is not a valid name.
Action
Check that the TPMBENC is set to the codeset encoding name desired. If necessarycreate a chareset.alias file in the APPDIR and add this TPMBENC as an alias to a valid encoding name.
6323
ERROR: Source codeset encoding name not found on buffer
Description
The typed buffer used did not have codeset encoding defined for it.
Action
Use tpsetmbenc() to add the codeset encoding name to this buffer.
6324
ERROR: The Kerberos plug-in doesn't support ISH.
Description
The Kerberos plug-in can't be used with ISH together.
Action
Don't configure Kerberos plug-in when ISH will be used.
See Also
Kerberos V plug-in
(5)
6325
ERROR: Client cannot obtain security credentials.
Description
The Tuxedo client cannot obtain security credentials related Kerberos authentication.
Action
See the "GSSAPI/SSPI" related error messages in ULOG and get the Kerberos environment ready. If problem persists contact your BEA Customer Support.
See Also
Kerberos V plug-in
(5)
6326
ERROR: Client cannot obtain KAUTHSVR principal name.
Description
The Tuxedo client cannot obtain KAUTHSVR principal name which is required for the Kerveros plug-in.
Action
Conigure the KAUTHSVR principal name correctly.
See Also
Kerberos V plug-in
(5)
6331
ERROR: Invalid message found, diagnostic=num1/num2/0xnum3/0xnum4/num5
Description
The BEA TUXEDO system data deserialization encountered an unexpected condition.
Action
Contact your BEA TUXEDO system Technical Support