WSNAT Messages 1300-1399
![]() |
![]() |
1300
ERROR: tpcall() call for service val failed, tperrno = val
Description
A call to tpcall
in the WSH
on behalf of the workstation client failed with tperrno set to val.
Action
No action required.
1301
ERROR: tpacall() call for service val failed, tperrno = val
Description
A call to tpacall
in the WSH
on behalf of the workstation client failed with tperrno set to val.
Action
No action required.
1304
ERROR: Failed to encode/decode establish connection request message
Description
The WSH
was unable to encode or decode the initial message that
establishes a connection to a workstation client.
Action
Please contact BEA Customer Support.
See Also
WSL
1305
ERROR: Encoding/decoding of ticket request failed
Description
The WSH
was unable to encode or decode part of the challenge
response protocol between itself and a workstation client.
Action
Please contact BEA Customer Support.
See Also
WSL
1306
ERROR: Encoding/decoding of ticket request failed
Description
The WSH
was unable to encode or decode part of the challenge
response protocol between itself and a workstation client.
Action
Please contact BEA Customer Support.
See Also
WSL
1308
ERROR: Component not licensed
Description
WSL
was run, but the command read the
BEA Tuxedo license and found that some of the necessary
components, including transactions, /Q, /TDomain, TxRPC,
Events, WebGUI, and /WS, were not enabled.
Action
Install a valid BEA Tuxedo license file, that allows for all components support, in $TUXDIR/udataobj before running the command.
1309
ERROR: Memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc() failed in the WSH while processing an unsolicited message that requires an acknowledgement.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1310
ERROR: The -z (minimum) or -Z (maximum) must be 0, 40, 56 or 128
Description
The -z
and -Z
options control the minimum level of link-level encryption required, and the maximum level allowed, respectively. Whenever possible, we recommend using the maximum level allowed. Valid arguments to these options are 0, 40, 56, and 128. The -z
option must be followed by an argument that identifies the minimum value; the -Z
option, by an argument that indicates the maximum value. The link-level encryption value of 40 bits is provided for backward compatibility.
Action
Change the incorrect argument of the appropriate option to 0, 40, 56, or 128.
See Also
WSL
(5)
1311
ERROR: Only 56 bit encryption is allowed
Description
The license installed allows only 56-bit encryption. However, the
WSL
attempted to set a minimum encryption level greater than
56.
Action
Either change the -z
option to be 56, 40, or 0 bits, or
get a license for stronger link-level encryption. The link-level encryption value of 40 bits is provided for backward compatibility. If you believe you
are licensed for stronger encryption,
contact BEA Customer Support.
See Also
WSL
(5)
1312
ERROR: Could not add workstation information: error code errorcode
Description
When transforming a buffer to workstation format, the WSH
could
not add workstation information. Save errorcode to give to
BEA Customer Support.
Action
Please contact BEA Customer Support.
See Also
WSL
1313
ERROR: Could not add message information: error code val
Description
When transforming a buffer to native format, the WSH
could
not add information. Save errorcode to give to BEA
Customer Support.
Action
Please contact BEA Customer Support.
See Also
WSL
1314
ERROR: Could not add workstation information: error code code
Description
The workstation handler or workstation listener could not add information necessary for the workstation client. The error code code may assist technical support determine the cause of the failure.
Action
Please contact BEA Customer Support.
1318
ERROR: Unable to initialize public key subsystem
Description
A WSH
was unable to initialize its public
key subsystem. The return value from the subsystem is errorcode.
Action
Check to ensure the proper public key plug-ins are installed. This can
be done with epifregedt
. If you believe the proper plug-ins
are installed, contact BEA Customer Support.
See Also
_ec_sec_pki_init
, epifregedt
1320
ERROR: Invalid unsolicited message format
Description
The WSH
has received an unsolicited message request in
an invalid format. Routing information about intended recipients is missing.
Action
Please contact BEA Customer Support.
See Also
WSL
, tpnotify
, tpbroadcast
1321
ERROR: Invalid internal buffer
Description
An internal buffer of the WSH
used for unsolicited message
notifications is corrupt.
Action
Please contact BEA Customer Support.
See Also
WSL
, tpnotify
, tpbroadcast
1322
ERROR: unable to decode or decrypt user data for routing
Description
Some form of routing was necessary, but the WSH
was unable
to decrypt the buffer for routing.
Action
Ensure that the WSH
has a proper decryption key for messages
requiring routing. Remove the routing from a service if the
WSH
cannot obtain the proper decryption key. Routing also
includes buffer type constraints for a service. If you believe there
are no routing criteria, or that the WSH
has a decryption
key, contact BEA Customer Support.
See Also
WSL
, _ec_sec_pki_init
1323
ERROR: A lockout has occurred because of license violation
Description
DBBL/BBL lockout occurs because the system has determined that the total number of active users exceeded 110% of BEA Tuxedo system licensed users for a grace period of 24 hours. At this time, no new clients can join the application until the overall active user count drops below 110% on a subsequent DBBL/BBL scan cycle.
Action
Upgrade your BEA Tuxedo system license with larger number of users to avoid future system lockouts. Please contact your BEA Tuxedo System Administrator.
1324
ERROR: tpalloc() failed, tperrno = val
Description
An attempt to dynamically allocate a buffer in the workstation handler failed.
The call to tpalloc
failed with tperrno
set to
tperrno_val.
Action
Check the error number and determine why tpalloc
failed. Most
likely, a system limit has been reached. Change the operating system tunable parameters
to increase the amount of space a process is allowed to dynamically allocate.
See Also
BEA TUXEDO Workstation Guide, tpalloc
(3c), tperrno
(5)
1328
ERROR: Bad conversational sequence number
Description
Conversations are sequenced in order to provide protection. One of the conversational messages arrived out of order. The conversation has been disconnected, and if a transaction was active, it has been set to the ABORTONLY
state.
Action
Look at the userlog to determine whether or not the BRIDGE
has given up sending any messages to the message queue for the workstation handler. If it has, the operating system may need to be tuned to properly handle a high volume of messages. Using compression may also alleviate this problem. This error may also occur when the BRIDGE
is failing over to a new network link or failing back to an high priority link.
1329
ERROR: Memory allocation failure
Description
An attempt to dynamically allocate memory from the operating system using malloc () failed while processing a tpacall message in the WSH. The message will fail.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1330
ERROR: Unable to get server group information for WSL
Description
While booting, a workstation handler must be able to retrieve information about its parent workstation listener process.
Action
Please contact BEA Customer Support.
1331
ERROR: Unable to get machine information for WSL
Description
While booting, a workstation handler must be able to retrieve information about its parent workstation listener process.
Action
Please contact BEA Customer Support.
1332
ERROR: Unable to get server information for WSL
Description
While booting, a workstation handler must be able to retrieve information about its parent workstation listener process.
Action
Please contact BEA Customer Support.
1333
ERROR: Sending of reply to security token call to client failed
Description
An attempt to send a reply to the workstation client with security tokens during the authentication exchange failed.
Action
Ensure that the client process still exists and that there are no network problems with the connection to the client.
1334
ERROR: Attempt to send encrypted buffer to interoperating site
Description
An attempt has been made to send a buffer which would have been encrypted to a site older than BEA Tuxedo Release 7.1.
Action
No buffer is marked for encryption can be sent to a site older than BEA Tuxedo Release 7.1. Upgrade the software on the remote system to handle encrypted buffers, or remove encryption from this buffer.
See Also
tpseal
, tpkey_open
1335
ERROR: Could not decode buffer for interoperating client
Description
The workstation handler must decode all messages from interoperating clients. However, the postrecv operation failed in the WSH.
Action
Contact BEA Customer Support
See Also
buffer
1336
ERROR: Handler received message of unknown format
Description
A message arrived at the WSH with an unknown format.
Action
Contact BEA Customer Support.
1337
WARN: WSH has policy SIGNATURE_REQUIRED=signature-required and ENCRYPTION_REQRUIRED=encryption-required but the message from the client was neither signed nor sealed
Description
If the WSL is in a group that has a SIGNATURE_REQUIRED value of signature-required or an ENCRYPTION_REQUIRED value of encryption-required, then every message originating from a workstation client must be signed or sealed, as determined by the policy. A message came in to the WSH which did not meet the requirement.
Action
Ensure all messages arriving at a WSH/WSL with the given policy is appropriately signed or sealed.
See Also
tpsign
, tpseal
, tpkey_open
,
ubbconfig
1338
WARN: WSH required encryption but the message from the client was not encrypted
Description
If the WSL is in a group that has a policy of ENCRYPTION_REQUIRED, then every message originating from a workstation client must be sealed. A message came in to the WSH which did not meet the requirement.
Action
Ensure all messages arriving at a WSH/WSL with the given policy is sealed.
See Also
tpseal
, tpkey_open
,
ubbconfig
1339
ERROR: WSH unable to decrypt message in order to enforce SIGNATURE_REQUIRED policy
Description
If the WSL is in a group that has a policy of SIGNATURE_REQUIRED, then every message originating from a workstation client must be signed. In order to determine if a particular message is signed, the WSH must be able to decrypt the message. However, no decryption key was available to the WSH to decrypt a message from the workstation client.
Action
Open an appropriate decryption key in the WSH using the public key initialization infrastructure.
See Also
tpseal
, tpkey_open
, _e_sec_pki_init
ubbconfig
1340
ERROR: Invalid security context
Description
An internal error occurred in the handler while attempting to enforce signature or encryption policy.
Action
Contact BEA Customer Support.
1341
WARN: WSH requires encryption but the message from the client is not encrypted
Description
If the WSL is in a group that has a policy of ENCRYPTION_REQUIRED, then every message originating from a workstation client must be sealed. A message came in to the WSH which did not meet the requirement.
Action
Ensure all messages arriving at a WSH/WSL with the given policy is sealed.
See Also
tpseal
, tpkey_open
,
ubbconfig
1342
WARN: WSH requires digital signature but the message from the client is not signed
Description
If the WSL is in a group that has a policy of SIGNATURE_REQUIRED, then every message originating from a workstation client must be signed. A message came in to the WSH which did not meet the requirement.
Action
Ensure all messages arriving at a WSH/WSL with the given policy is signed.
See Also
tpsign
, tpkey_open
,
ubbconfig
1343
WARN: Unable to format orderly release message - error-code
Description
An internal error of error-code occurred while attempting to format an orderly release message for a workstation client.
Action
Contact BEA Customer Support.
See Also
tpterm
1344
WARN: Unable to encode orderly release message
Description
An internal error occurred while attempting to encode an orderly release message for a workstation client.
Action
Contact BEA Customer Support.
See Also
tpterm
1345
ERROR: unable to decode or decrypt user data for routing
Description
While doing a tpconnect on behalf of a workstation client, the WSH was forced to examine the data in order to route the message properly. However, the WSH could not decrypt the message, and so could not route the message.
Action
Either open an appropriate decryption key in the WSH using the public key initialization infrastructure, or do not use routing on the conversational service.
See Also
tpconnect
, ubbconfig
1346
ERROR: Invalid network address specified for -n option, val
Description
The argument passed with the -n option is not a valid
network address.
See the description of the -n option on the
WSL
(5) page.
Action
Correct the CLOPT for the WSL and re-boot the server.
See Also
WSL
1347
WARN: Unable to invoke audit postop on security failure
Description
A call to the audit_postop()
plugin security function on
authentication failure. This call was being attempted due to a
failure return from the authentication plugin security function
acquire_cred()
. No audit of the failure was able to
be performed/recorded.
Action
Check the registration of the auditing plugin. If the plugin used is the
default supplied plugin, check the userlog file and filesystem space. If the
plugin used is not the default supplied plugin, contact the supplier of
the plugin code.
In addition, because of the authentication failure, if the failure was not
intended, check the registration, authentication
configuration, and return from the acquire_cred()
plugin
security function.
See Also
epifregedt
, epifreg
1348
WARN: Unable to invoke audit postop on security failure
Description
A call to the audit_postop()
plugin security function on a
failure to send a message to the client failed. No audit of the failure
was able to be performed/recorded.
Action
Check the registration of the auditing plugin. If the plugin used is the default supplied plugin, check the userlog file and filesystem space. If the plugin used is not the default supplied plugin, contact the supplier of the plugin code.
See Also
epifregedt
, epifreg
1349
WARN: Unable to invoke audit postop on security failure
Description
A call to the audit_postop()
plugin security function during
authentication failed. This call was being attempted due to a
failure return from the authentication plugin security function
accept_sec_context()
. No audit of the failure was able to
be performed/recorded.
Action
Check the registration of the auditing plugin. If the plugin used is the
default supplied plugin, check the userlog file and filesystem space. If the
plugin used is not the default supplied plugin, contact the supplier of
the plugin code.
In addition, because of the authentication failure, if the failure was not
intended, check the registration, authentication
configuration, and return from the accept_sec_context()
plugin
security function.
See Also
epifregedt
, epifreg
1350
ERROR: Pre 7.1 client not allowed. Use -t option on WSL
Description
A request from a workstation client older than BEA Tuxedo Release 7.1 arrived at the WSH. However, the -t servopts option was not specified on the WSL CLOPT line in the UBBCONFIG. In order to close a possible security hole, the administrator must explicitly tell the WSL that it is allowed to accept requests from older workstation clients.
Action
If you wish to allow the server to interoperate with sites older than BEA Tuxedo Release 7.1, then the CLOPT for the WSL must contain -t before the -- option.
See Also
servopts
1351
ERROR: Pre 7.1 client not allowed. Use -t option on WSL
Description
A request from a workstation client older than BEA Tuxedo Release 7.1 arrived at the WSH. However, the -t servopts option was not specified on the WSL CLOPT line in the UBBCONFIG. In order to close a possible security hole, the administrator must explicitly tell the WSL that it is allowed to accept requests from older workstation clients.
Action
If you wish to allow the server to interoperate with sites older than BEA Tuxedo Release 7.1, then the CLOPT for the server must contain -t before the -- option.
See Also
servopts
1352
ERROR: Cannot get security tokens for client
Description
Tokens are not available for the workstation client. This client's network connection will be dropped.
Action
Contact your AAA security provider. If you are using the default AAA security provider provided by BEA Systems, Inc., then contact BEA Customer Support.
1353
ERROR: Failure during security token exchange val
Description
A fatal error occurred during the GSSAPI exchange of tokens between the workstation client and the workstation handler. The error code was val.
Action
Contact your AAA security provider. If you are using the default AAA security provider provided by BEA Systems, Inc., then contact BEA Customer Support.
1354
ERROR: Protocol error, second tpinit or security exchange incomplete
Description
The workstation handler received an initialization request before the security protocol was finished. There may be an attack under way.
Action
Ensure the security of your network. If the network is secure and operating properly, contact BEA Customer Support.
1355
ERROR: Unable to switch client contexts
Description
While processing an initialization request, the workstation handler was unable to switch contexts to the context of the workstation client.
Action
Contact BEA Customer Support.
1356
ERROR: A lockout has occurred because of license violation
Description
There are too many clients logged in for the current license.
Action
Upgrade your BEA Tuxedo system license to avoid future system lockouts. Please contact your BEA Tuxedo System Administrator.
1357
ERROR: Invalid tpinit buffer
Description
The buffer that points to the tpinit buffer in the workstation handler is corrupt.
Action
Contact BEA Customer Support.
1358
ERROR: Invalid client name given val.
Description
The client name val is invalid. This name is reserved for special workstation clients provided by BEA Systems.
Action
Change the client name in the TPINIT buffer of the workstation client. Ensure the security of your network. If the network is secure and operating properly, contact BEA Customer Support.
1359
WARN: Invalid notification option given 0xval, reset to TPU_IGN.
Description
The notification option val is invalid.
Action
Remove the option val in the TPINIT buffer of the workstation client. If you believe that the option val is not set in the TPINIT buffer of the workstation client, then contact BEA Customer Support.
1360
ERROR: Failed to update registry table information
Description
The workstation client was unable to update registry information about a workstation client that tried to log in.
Action
Contact BEA Customer Support.
1361
ERROR: Memory allocation error
Description
While attempting to allocate memory for the reply to an initialization request, the workstation hander ran out of memory.
Action
Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1362
WARN: setsockopt() for SO_KEEPALIVE failed
Description
An attempt was made to set the SO_KEEPALIVE socket option on a workstation client link inside the workstation handler. The attempt failed.
Action
Ensure your TCP/IP stack supports the SO_KEEPALIVE option. If it does, and you believe your network to be operating properly, contact BEA Customer Support.
1363
WARN: KEEPALIVE option requested but not available on this platform
Description
The keepalive option was requested from the WSH to the WSC, but this platform does not support the KEEPALIVE option.
Action
Set the -K option on the WSL command line to 'none' or 'client'.
See Also
WSL(5)
1364
ERROR: Unable to format reply buffer for tpinit
Description
An internal buffer in the workstation handler was corrupted.
Action
Contact BEA Customer Support.
1365
ERROR: Unable to send client initialization parameters
Description
An attempt was made to send client initialization parameters to the workstation client. However, the attempt to send failed.
Action
Check the network connection. This error could occur if the workstation client was suddenly disconnected from the network. If you believe the workstation client is still connected and that the network is operating properly, contact BEA Customer Support.
1366
ERROR: Pre 7.1 client not allowed. Use -t option on WSL
Description
A request from a workstation client older than BEA Tuxedo Release 7.1 arrived at the WSH. However, the -t servopts option was not specified on the WSL CLOPT line in the UBBCONFIG. In order to close a possible security hole, the administrator must explicitly tell the WSL that it is allowed to accept requests from older workstation client.
Action
If you wish to allow the server to interoperate with sites older than BEA Tuxedo Release 7.1 then the CLOPT for the WSL must contain -t before the -- option.
See Also
servopts
1367
ERROR: Invalid attempt to use older initialization opcode
Description
A BEA Tuxedo Release 7.1 or later workstation client attempted to use an older initialization opcode. A security attack may be under way.
Action
Ensure the security of your network. If the network is secure and operating properly, contact BEA Customer Support.
1368
ERROR: Too many client requests are blocked on WSH context(id), request dropped!
Description
The workstation handler was unable to send the request due to a blocking condition. The message buffered because of the blocking condition exceeded the limitation. A TPESYSTEM error code is returned to WS client.
Action
Perform one or more of the following actions to relieve the blocking condition. Modify the client application so that there will not be too many requests outstanding for the same context at the same time. You can also configure more application servers in the BEA Tuxedo system configuration file so that request can be handled faster. You may also need to tune the kernel to have a larger message queue.
1369
ERROR: Unable to read key
Description
A WSH
was unable to initialize its public
key subsystem. It attempted to get the application key from the
database file.
Action
Check the userlog for a message indicating the nature of the failure to get the key.
1370
ERROR: Unable to generate decryption schedule
Description
A WSH
was unable to initialize its public
key subsystem. It attempted to initiailze the decryption schedule.
Action
Check the userlog for a message indicating the nature of the failure to get the key.
1371
ERROR: Unable to decrypt password
Description
A WSH
was unable to initialize its public
key subsystem. It attempted to decrypt the password.
Action
Check the userlog for a message indicating the nature of the failure to get the key.
1372
ERROR: Received message with invalid size value
Description
The WSH
received a packet with an invalid size value. A Workstation Client may have corrupted a message before transmission, or the message contents became corrupted during transmission or upon receipt.
Action
If this error happens consistently, then contact BEA Customer Support.
1373
ERROR: Internal system error at (val.val)
Description
An internal system error occurred.
Action
Contact BEA Customer Support.
1374
ERROR: Compression/decompression of message failed at (val.val)
Description
WSH cannot compress/decompress a message.
Action
Contact BEA Customer Support.
1380
ERROR: The -z (min) or -Z (max) must be 0, 40, 56, 128, or 256
Description
The WSL is configured with unsupported minimum and maximum encryption strength.
Action
Correct the WSL configuration.
1381
ERROR: Numeric argument expected for -R option
Description
WSL configuration for SSL renegotiation interval is not configured with numeric informatil.
Action
Correct Tuxedo configuration, and then reload and run it.
1382
ERROR: The -R reneg argument must be between 0 and 35791394
Description
The WSL renegotiation value is out of range.
Action
Correct your WSL configuration.
1383
ERROR: The -S nwaddr argument must be between minval and maxval
Description
The configured WSL SSL port network address is out of legal range. The minimum port number shoud be greater than 0, and the maximum port should be less than 35791394
Action
Correct your WSL's SSL port configuration
1384
ERROR: Memory allocation failure, location(func_name).
Description
WSL failed to allocate memory buffer to store SSL network address information during WSL initialization time.
Action
Make sure you configure your system with enough physical and virtual memory.
1385
ERROR: Could not get listening socket information.
Description
WSL could not find out information of lietening endpoint information when receive a connect request from client.
Action
Contact BEA Customer Support.
1386
INFO: SSL network address disabled
Description
This is informational. WSL process is suspended by the Tuxedo administrator so the SSL listening endpoint is disabled.
Action
No action required.
1387
WARN: Failed to allocate a network resource (reason_code)
Description
WSL failed to allocate a network descriptor because memory allocation failed or mutex operation failed.
Action
Make sure enough memory is configured in the system. If problem persist contact BEA Customer Support.
1388
WARN: Failed to reestablish network address nwaddr
Description
WSL failed to establish a listening endpoint. The common reasons for this failure are configuration error and memory allocation failure.
Action
Correct the WSL configuration information.
1389
INFO: Reestablished network address nwaddr
Description
WSL successfully re-established its listening endpoint.
Action
No action necessary.
1390
ERROR: Numeric argument expected for -S option
Description
WSL -S option is incorrectly configured with non-numeric value.
Action
Correct the configuration information for WSL.
1391
WARN: -R SSL renegotiation option set without non-zero -S option
Description
WSL renegotiation option, -R, is configured but -S option is either not configured or has value of 0.
Action
Correct the WSL configuration information.
1392
ERROR: SSL encryption add-on package is not installed
Description
Missing or expired Tuxedo license file or not licensed to use SSL.
Action
Purchase Tuxedo SSL license or check whether Tuxedo license is correctly installed.
1393
ERROR: Only 56 bit SSL encryption is allowed
Description
The current Tuxedo license only allows to use maximum 56 bits encryption strength. But the SSL encryption strength configured for WLS is greater than that limit.
Action
Correct the configuration.
1394
ERROR: Mixing -R and -a option is not supported
Description
It is not allowed to have SSL renegotiation and mutual authentication configured at the same time.
Action
Correct the configuration.
1395
WARN: IPv6 address does not support -H
Description
IPv6 address does not support -H
Action
Remove -H option if IPv6 is enabled.
1396
ERROR: Fail to retrieve corresponding WSH address
Description
Fail to retrive corresponding WSH address
Action
No action required.
1397
INFO: IPv6 not enabled.
Description
The IPv6 address is used but IPv6 isn't enabled.
Action
Enable IPv6 by setting environment variable TMUSEIPV6=Y
![]() ![]() |
![]() |
![]() |