This chapter provides information about the hardware and software requirements and the installation procedure for Oracle Database Gateway for ODBC.
To install the gateway, follow these steps:
Ensure that the system meets all of the hardware and software requirements specified in "System Requirements for Oracle Database Gateway for ODBC"
Run the Oracle Universal Installer.
See "Step Through the Oracle Universal Installer" for more information about running the Oracle Universal Installer
Oracle Universal Installer is a menu-driven utility that guides you through the installation of the gateway by prompting you with action items. The action items and the sequence in which they appear depend on your platform.
See Table 10-3 for a description of the installation procedure of Oracle Database Gateway for ODBC
This section provides information about the hardware and software requirements for the gateway. It contains the following sections:
"Hardware Requirements" on page 10-1
"Software Requirements" on page 10-3
Table 10-1 lists the minimum hardware requirements for Oracle Database Gateway for ODBC.
Table 10-1 Hardware requirements for Oracle Database Gateway for ODBC
| Hardware Items | Required for AIX-Based System | Required for HP-UX Itanium | Required for Solaris Operating System (SPARC) | Required for Linux x86 | Required for Linux x86 64 bit** |
|---|---|---|---|---|---|
|
Temporary Disk Space |
400 MB |
400 MB |
400 MB |
400 MB |
400 MB |
|
Disk Space |
1.5 GB |
1.5 GB |
750 MB |
750 MB |
750 MB |
|
Physical Memory* |
512 MB |
512 MB |
512 MB |
512 MB |
512 MB |
|
Swap Space |
1 GB |
1 GB |
1 GB |
1 GB |
1 GB |
|
Processor |
IBM RS/6000 AIX-Based System Processor |
HP Itanium processor for hp-ux 11 |
Sun Solaris Operating System (SPARC) Processor |
x86 |
x86_64 |
* The minimum swap space is 1 GB (or twice the size of RAM). On systems with 2 GB or more of RAM, the swap space can be between one and two times the size of RAM. On AIX systems with 1 GB or more of memory, do not increase the swap space more than 2 GB.
** Database Gateway for ODBC on Linux x86-64 is now a 64-bit application that requires the use of a 64-bit third party ODBC Driver
To ensure that the system meets the minimum requirements, follow these steps:
To determine the physical RAM size, enter one of the following commands:
| Operating System | Command |
|---|---|
| AIX | # /usr/sbin/lsattr -E -l sys0 -a realmem |
| HP-UX Itanium | # /usr/contrib/bin/machinfo | grep -i Memory |
| Solaris (SPARC) | # /usr/sbin/prtconf | grep "Memory size" |
| Linux x86 | # grep MemTotal /proc/meminfo |
| Linux x86 64 bit | # grep MemTotal /proc/meminfo |
If the size of the physical RAM installed in the system is less than the required size, you must install more memory before continuing.
To determine the size of the configured swap space, enter one of the following commands:
| Operating System | Command |
|---|---|
| AIX | # /usr/sbin/lsps -a |
| HP-UX Itanium | # /usr/sbin/swapinfo -a |
| Solaris (SPARC) | # /usr/sbin/swap -s |
| Linux x86 | # grep SwapTotal /proc/meminfo |
| Linux x86 64 bit | # grep SwapTotal /proc/meminfo |
If necessary, see your operating system documentation for information about how to configure additional swap space.
To determine the amount of disk space available in the /tmp directory enter the following commands:
| Operating System | Command |
|---|---|
| AIX | # df -k /tmp |
| HP-UX Itanium | # bdf /tmp |
| Solaris (SPARC) | # df -k /tmp |
| Linux x86 | # df -k /tmp |
| Linux x86 64 bit | # df -k /tmp |
To determine the amount of disk space available on the system enter the following commands:
| Operating System | Command |
|---|---|
| AIX | # df -k |
| HP-UX Itanium | # bdf |
| Solaris (SPARC) | # df -k |
| Linux x86 | # df -k |
| Linux x86 64 bit | # df -k |
The following section describes the minimum software requirements for Oracle Database Gateway for ODBC.
Table 10-3 lists the minimum operating system version required for Oracle Database Gateway for ODBC. If your operating system is lower than the minimum requirements, upgrade your operating system to meet the specified levels.
Table 10-2 Operating Systems version for Oracle Database Gateway for ODBC
| Operating System | Version |
|---|---|
|
AIX |
AIX 5L version 5.3 TL9 or higher, AIX 6.1 |
|
HP-UX Itanium |
HP-UX 11iv3 (11.31) |
|
Solaris (SPARC) |
Solaris 10, (Update 6 or later) |
|
Linux x86 Red Hat |
One of the following operating system versions:
|
|
Linux x86 64 bit Red Hat |
One of the following operating system versions:
|
|
Oracle Linux x86 |
One of the following operating system versions:
|
|
Oracle Linux x86 64 bit |
One of the following operating system versions:
|
|
Asianux Linux 32 bit |
One of the following operating system versions:
|
|
Asianux Linux 64 bit |
One of the following operating system versions:
|
|
SUSE Linux Enterprise Server 32 bit |
SUSE Linux Enterprise Server 10.0 SUSE Linux Enterprise Server 11.0 |
|
SUSE Linux Enterprise Server 64 bit |
SUSE Linux Enterprise Server 10.0 SUSE Linux Enterprise Server 11.0 |
To ensure that the system meets the minimum requirements, follow these steps:
To determine which version of AIX is installed, enter the following command:
# oslevel -r
To determine which version of HP-UX Itanium is installed, enter the following command:
# uname -a
To determine which version of Solaris Operating System (SRPARC) is installed, enter the following command:
# uname -r
To determine which distribution and version of Linux x86 is installed, enter the following command:
# cat /etc/issue
To determine which distribution and version of Linux x86 64 bit is installed, enter the following command:
# cat /proc/version
For the latest certified configuration refer to the OTN Web site:
http://www.oracle.com/technetwork/database/gateways/certmatrix-168347.pdf
Table 10-3 describes the installation procedure for Oracle Database Gateway for ODBC.
Table 10-3 The Oracle Universal Installer: Steps for Installing Oracle Database Gateway for ODBC
| Screen | Response |
|---|---|
|
Oracle Universal Installer: Welcome |
Click Next. |
|
Oracle Universal Installer: File Locations |
The Source section of the screen is where you specify the source location that the Oracle Universal Installer must use to install the Oracle Database Gateway for ODBC. You need not edit the file specification in the Path field. The default setting for this field points to the installer file on your gateway installation media. The Path field in the Destination section of the File Locations screen is where you specify the destination for your installation. You need not edit the path specification in the Path field. The default setting for this field points to |
|
Oracle Universal Installer: Available Product Components |
a. Select Oracle Database Gateway for ODBC 11.2. b. Click Next. |
|
Oracle Universal Installer: Summary |
The Installation Summary screen enables you to review a tree list of options and components for this installation. Click Install to start installation. |
|
Oracle Net Configuration Assistant: Welcome |
Click Cancel |
|
Oracle Net Configuration Assistant: |
Click Yes |
|
Oracle Universal Installer: Configuration Tools |
Click Exit |
|
Exit |
The final screen of the Oracle Universal Installer is the End of Installation screen. Click Exit to exit the installer. |