Oracle® Database

2 Day + Application Express Developer's Guide

Release 4.0

E15516-04

December 2010

Oracle Database 2 Day + Application Express Developer's Guide, Release 4.0

E15516-04

Copyright © 2003, 2010, Oracle and/or its affiliates. All rights reserved.

Primary Authors: Drue Baker, Terri Jennings

Contributors: Sharon Kennedy, David Peake

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.

This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Contents

Preface

- Topic Overview

- Audience

- Documentation Accessibility

- Related Documents

- Conventions

What's New

- What's New in this Document for Release 4.0

1 Introducing Oracle Application Express

- About Oracle Application Express

- Understanding Oracle Application Express Architecture

- About the Oracle Application Express Environment

- About Workspaces

- About Oracle Application Express User Roles

- Overview of the Application You Build

2 Accessing Your Development Environment

- Before You Begin

- Accessing the Hosted Demo Environment

- Logging In to the Hosted Demo Environment

- Setting Up Your Own Local Environment

- Logging In to Administration Services

- Creating a Workspace

- Logging In to Your Local Instance

- Creating Additional User Accounts

3 Getting Started with Oracle Application Express

- About the Workspace Home Page

- What Is Application Builder?

- Installing the Sample Objects

- Downloading OEHR Sample Objects

- Importing the OEHR Sample Objects

- Viewing Your Database Objects

4 Building Your Application

- About the Application You Build in This Tutorial

- Creating the Initial Application

- Previewing Your Application

- Modifying the Departments Report

- Run the Report to View Added Columns

- Using an Interactive Report

- Save Report Settings as the Default

- Create a Filter

- Change the Sort Order

- Add a Controlled Break

- Display the Single Row View

- Reset Report Settings

- Adding an Employees Report and Form

- Previewing the Pages

- Editing the Employees Report

- Create a Function

- Add a Column

- Previewing the Page

- Changing the Column Format

- Adding a Link on the Home Page to the Employees Report

- Adding a Department Column to the Employees Report

- Add a Column

- Display Column in the Report

- Save Report Settings as the Default

- Linking a Column Value to Another Page

- Change Column Value to a Link

- Run the Departments Report

- Create a Highlight to Test Clear Interactive Report Command

- Adding a List of Values to the Employees Report

- Add a List of Values

- Add an Item to Display List of Values

- Change Employees Report Query

- Change Column Link on Department Report

- Turning Off Pagination

- Adding Your Company Name

- Switching Themes to Change the User Interface

5 About Deploying Your Application

- Overview of Deploying Your Application

- Creating End Users

- About Publishing the Application URL

6 About Globalization

- About Language Identification and Rendering

- Specifying the Method for Global Identification

7 Next Steps

- Downloading Public Packaged Applications and Sample Code

- Additional Resources

Index

Preface

Oracle 2 Day + Application Express Developer's Guide introduces you to application development using Oracle Application Express. This guide shows you how to set up development environment or access a hosted demonstration environment to use with this guide. It then walks you through building an initial application, modifying it, and previewing it.

Through a series of exercises, you become familiar with the Oracle Application Express user interface, basic product functionality, and some underlying concepts that enable you to develop professional, fast, and secure applications.

Topics:

- Topic Overview

- Audience

- Documentation Accessibility

- Related Documents

- Conventions

Topic Overview

This document contains the following sections:

Title

Description

Introducing Oracle Application Express

Describes Oracle Application Express, its architecture and the environment for using the product. It also introduces you to some concepts and terms used in this guide.

Accessing Your Development Environment

Leads you through the steps to access a development environment for your use.

Getting Started with Oracle Application Express

Introduces you to areas of the user interface. It also leads you through installing the sample objects to use with this guide.

Building Your Application

Leads you through the steps for building an application, modifying it, and previewing it at different points during the development process.

About Deploying Your Application

Describes some basic information about deploying your application. It also leads you through the steps to create end users and to determine the URL of your application.

About Globalization

Describes some basic information about globalization. It also leads you through the steps to specify how the application determines global identification.

Next Steps

Describes additional resources to expand your knowledge of Oracle Application Express and boost your productivity.

Audience

Oracle 2 Day + Application Express Developer's Guide is intended for:

- Workspace administrators who want to set up the Oracle Application Express development environment

- Application developers who want to learn how to build database-centric Web applications using Oracle Application Express

To use this guide, you must have a general understanding of relational database concepts and the operating system environment under which Oracle Application Express is running.

Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible to all users, including users that are disabled. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at http://www.oracle.com/accessibility/.

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/support/contact.html or visit http://www.oracle.com/accessibility/support.html if you are hearing impaired.

Related Documents

For more information, see these Oracle resources:

- Oracle Application Express Installation Guide

- Oracle Application Express Release Notes

- Oracle Application Express Application Builder User's Guide

- Oracle Application Express SQL Workshop Guide

- Oracle Application Express API Reference

- Oracle Application Express Migration Guide

- Oracle Application Express Administration Guide

- Oracle Database Concepts

- Oracle Database Advanced Application Developer's Guide

- Oracle Database Administrator's Guide

- Oracle Database SQL Language Reference

- SQL*Plus User's Guide and Reference

- Oracle Database PL/SQL Language Reference

For information about Oracle error messages, see Oracle Database Error Messages. Oracle error message documentation is available only in HTML. If you have access to the Oracle Database Documentation Library, you can browse the error messages by range. Once you find the specific range, use your browser's "Find in Page" feature to locate the specific message. When connected to the Internet, you can search for a specific error message using the error message search feature of the Oracle online documentation.

For additional documentation available on Oracle Technology Network (OTN), visit the Oracle Application Express Web site located at:

http://www.oracle.com/technetwork/developer-tools/apex/overview/index.html

For additional application examples, go to the Learning Library. Search for free online training content, including Oracle by Example (OBE), demos, and tutorials. To access the Oracle Learning Library, go to:

http://www.oracle.com/technetwork/tutorials/index.html

Many books in the documentation set use the sample schemas of the seed database, which is installed by default when you install Oracle. See Oracle Database Sample Schemas for information about how these schemas were created, and how you can use them yourself.

Printed documentation is available for sale in the Oracle Store at:

http://shop.oracle.com/

To download free release notes, installation documentation, white papers, or other collateral, visit the Oracle Technology Network (OTN). You must register online before using OTN; registration is free and can be done at:

http://www.oracle.com/technology/membership/

If you have a user name and password for OTN, then you can go directly to the documentation section of the OTN Web site at:

http://www.oracle.com/technology/documentation/

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

What's New

This section summarizes updates made to Oracle Application Express Administration Guide for release 4.0.

What's New in this Document for Release 4.0

This section summarizes general updates, revised content, and new content added to Oracle 2 Day + Application Express Developer's Guide for release 4.0.

General Updates

- All content has been updated to reflect new functionality

- All discussions of the Page Definition have been rewritten to use Tree view

- Screen captures and graphics have been added and updated to reflect release 4.0 user interface enhancements

Revised Content

The following sections contain significant revisions:

- "Using an Interactive Report"

- "Adding a List of Values to the Employees Report"

- "Switching Themes to Change the User Interface"

1 Introducing Oracle Application Express

This section describes Oracle Application Express, its architecture, and the environment for using the product. It also introduces you to concepts and terms used in this guide when discussing Oracle Application Express.

Topics:

- About Oracle Application Express

- Understanding Oracle Application Express Architecture

- About the Oracle Application Express Environment

- About Oracle Application Express User Roles

- Overview of the Application You Build

About Oracle Application Express

Oracle Application Express is a rapid Web application development tool for the Oracle database. Using only a Web browser and limited programming experience, you can develop professional applications that are both fast and secure. Thanks to built-in features such as user interface themes, navigational controls, form handlers, and flexible reports, Oracle Application Express accelerates the application development process.

From the end user's perspective, the deployed applications require only a browser and access to an Oracle database running Application Express.

Tip:
To learn more about Oracle Application Express features, click the Learn more... button on the Workspace home page.

Understanding Oracle Application Express Architecture

Oracle Application Express installs with your Oracle database and is comprised of data in tables and PL/SQL code.

Whether you run the Oracle Application Express development environment or an application you built using Oracle Application Express, the process is the same. Your browser sends a URL request that is translated into the appropriate Oracle Application Express PL/SQL call. After the database processes the PL/SQL, the results are relayed back to your browser as HTML. This cycle happens each time you request or submit a page.

The application session state is managed in the database tables within Oracle Application Express. It does not use a dedicated database connection. Instead, each request is made through a separate database session, consuming minimal CPU resources.

Understanding Web Server Options

In order to run, Oracle Application Express must have access to Oracle Application Express Listener, Oracle HTTP Server and mod_plsql, or the embedded PL/SQL gateway.

About Oracle HTTP Server (Apache) and Oracle Application Express Listener

Oracle HTTP Server uses the mod_plsql plug-in to communicate with the Oracle Application Express engine within the Oracle database. Oracle Application Express Listener communicates directly with the Oracle Application Express engine, thus eliminating the need for the mod_plsql plug-in.

Both Oracle HTTP Server and the Oracle Application Express Listener function as communication brokers between the Web server and the Oracle Application Express objects in the Oracle database. More specifically, they map browser requests into database stored procedure calls over a SQL*Net connection. The following graphic illustrates the Oracle Application Express architecture using Oracle HTTP Server and mod_plsql.

Note that this three tier architecture consists of the following components: a Web browser, Oracle HTTP Server (Apache) with mod_plsql or Oracle Application Express Listener, and an Oracle database containing Oracle Application Express.

Advantages of Oracle HTTP Server (Apache) with mod_plsql or Oracle Application Express Listener include:

- Separation from mid-tier for the database tier

- Appropriate for Oracle Real Application Clusters (Oracle RAC) environments

- Versions prior to Oracle Database 11.1 require Oracle Application Express Listener or Oracle HTTP Server (Apache) with mod_plsql. The following graphic illustrates the three-tier architecture.

About the Embedded PL/SQL Gateway

The embedded PL/SQL gateway installs with in the Oracle database. It provides the Oracle database with a Web server and also the necessary infrastructure to create dynamic applications. The embedded PL/SQL gateway runs in the Oracle XML DB HTTP server in the Oracle database and includes the core features of mod_plsql. The following graphic illustrates the Oracle Application Express architecture using the embedded PL/SQL gateway.

As shown in the previous graphic, the embedded PL/SQL gateway is a simple two tier architecture and consists of theses components: a Web browser and an Oracle database, containing the embedded PL/SQL and Oracle Application Express.

Advantages of the embedded PL/SQL gateway:

- Ease of configuration

- Included in the database

- No separate server installation

See Also:
"Understanding Administrator Security Best Practice" in Oracle Application Express Application Builder User's Guide

About the Application Express Engine

The Application Express engine renders and processes pages. It also performs these tasks:

- Session state management

- Authentication services

- Authorization services

- Page flow control

- Validations processing

About the Oracle Application Express Environment

Oracle Application Express enables a single Oracle database to become a shared workgroup database service. Multiple users can access it using a Web browser without installing additional software.

About Workspaces

The area where you develop applications is called a workspace. A workspace is a virtual private database that enables multiple users to work within the same Oracle Application Express installation while keeping their objects, data, and applications private.

In a typical development environment, you might create a single workspace for all your developers to share. However, you can also create dedicated workspaces for specific developers or projects. Creating a dedicated workspace limits access to the workspace objects to only those users associated with the workspace.

The following illustration shows the relationship among users and developers, workspaces, and database schemas.

When you create a workspace, you associate it with a new or existing schema. A schema is a logical container for database objects such as tables, views, and stored procedures. A single schema can be associated with one or more workspaces.

About Oracle Application Express User Roles

When setting up Application Express users at a large organization, you assign roles and privileges to specific users. The roles within Oracle Application Express include the following:

- Workspace administrators are users who perform administrator tasks specific to a workspace such as managing user accounts, monitoring workspace activity, and viewing log files.

- Developers are users who create and edit applications and modify database objects. Developers can have their own workspace or share a workspace.

- End users have no development privileges. You define end users so that they can access applications that do not use an external authentication scheme.

- Instance administrators are superusers that manage an entire hosted instance using the Application Express Administration Services application.

The following illustration shows multiple users with various roles accessing the Oracle Application Express development environment, Application Express Administration Services, and the published applications.

For this guide, you must have the privileges usually associated with three roles: Instance Administrator, Workspace Administrator, and Developer. The following illustration shows an Oracle Application Express instance with a single user.

Overview of the Application You Build

In "Building Your Application", you create a simple Human Resources (HR) application for a fictitious company called AnyCo Corp. The application manages departmental and employee information stored in the department and employees tables that you create. The tutorial shows you how to build the application, modify it, and then preview it.

2 Accessing Your Development Environment

This section guides you through the steps to access an Oracle Application Express development environment for your use. Then, you and other developers can begin building applications within Oracle Application Express.

Topics:

- Before You Begin

- Accessing the Hosted Demo Environment

- Setting Up Your Own Local Environment

- Creating Additional User Accounts

Before You Begin

Before you begin this section, do the following:

- Read "Introducing Oracle Application Express".

- Confirm your Web browser supports JavaScript and the HTML 4.0 and Cascading Style Sheet (CSS) 1.0 standards. The following browsers meet this requirement:

- Microsoft Internet Explorer 7.0 or later version

- Mozilla Firefox 3.5 or later version

- Google Chrome 4.0 or later version

- Apple Safari 4.0 or later version

- Enable cookies for your Web browser.

- Determine which environment you want to use:

- Oracle provides a hosted demonstration (demo) environment where you can try out Oracle Application Express.
Using the demo environment is the fastest way to access a development environment. You request a workspace from an Oracle Application Express Web site and provide some basic user information. Shortly after you submit your request, you receive your login credentials in an email. This option does not require installing any software.

For instructions on using the demo environment, see "Accessing the Hosted Demo Environment".

Note:
Do not use the hosted demonstration environment for your production work.

- Set up your own local instance of Oracle Application Express. To do that, install Oracle Application Express and then follow the steps in "Setting Up Your Own Local Environment".
For instructions on installing Oracle Application Express, review the Oracle Application Express Installation Guide.

Accessing the Hosted Demo Environment

To use Oracle Application Express without installing the product locally, go to the hosted demo environment and sign up for a workspace.

To access the hosted demo environment:

1. In a Web browser, go to:
http://apex.oracle.com

2. Click the Sign Up button.
The Registration Wizard appears. Note the steps included in the wizard appear in a flowchart on the left side of the page. The highlighted block indicates the step you are performing.

3. On Welcome, review the information and click Next.

4. Identify the administrator for the service. Enter a first name, last name, and valid email address and click Next.
The system generates an email with your login credentials and sends it to the email address you enter.

5. For Workspace, enter a workspace name.
Workspace names must be unique. Requesting a duplicate name might delay your request. In general, enter a name that is significant to you. For example, enter your own name, your company name, or the name of the project or department to which your applications pertain.

To use the same name for your workspace and your schema (defined in the next step) use alphabetic characters when naming your workspace. Schema names are restricted to alphabetic characters.

6. For Select Database Schema, enter the following:

1. New schema to create - Enter a name containing only alphabetic characters.

2. Initial Space Allocation - Select at least 10 MB to accommodate the space needed for creating the objects required for this guide.

3. Click Next.

7. Describe why you are requesting the service and click Next.

8. For Confirmation, enter:

1. Verification Code - Enter the displayed numeric and alphabetic characters in the Verification Code field. Be sure to use the correct capitalization because the verification code is case-sensitive.

2. Review the information and click Submit Request.

An initial email containing a link is sent to you. Click the link within the email to complete the workspace provisioning process. This step verifies that your email address is valid before approving a workspace. After that, an email with your login credentials is sent to you. Use those credentials to log in to the hosted demo environment and begin using Oracle Application Express.

Logging In to the Hosted Demo Environment

Using the login credentials you received in an email, log in to your dedicated workspace on the hosted demo environment.

To log in to the hosted demo environment:

1. In a Web browser, go to:
http://apex.oracle.com

2. On the Login page, enter your login credentials.

3. Click Login.
The Workspace home page appears. You may be prompted to change your password. If not, you can change it manually by clicking the Change Password link on the right side of the Workspace home page. Then, enter in the information requested on the page that appears.

To continue with the tutorials, skip the rest of this section and go to "Getting Started with Oracle Application Express".

Setting Up Your Own Local Environment

Instead of using the hosted demo environment, you can install Oracle Application Express locally. If you do a local installation, you must set up your development environment. The general steps you must perform include:

1. Install Oracle Application Express as described in Oracle Application Express Installation Guide.

2. Log in to Application Express Administration Services, as described in "Logging In to Administration Services".

3. Create a workspace, as described in "Creating a Workspace".

4. (Optional) Create additional users with developer or administrator privileges, as described in "Creating Additional User Accounts".

Note:
This tutorial explains a simplified method for setting up your development environment so that you can begin using Oracle Application Express. However, when you want to set up your development environment to accommodate your real-life development needs, review “Oracle Application Express Hosted Instance Administration" in Oracle Application Express Administration Guide.

Logging In to Administration Services

To set up your local development environment, you first must log in to Oracle Application Express Administration Services. This is a separate application for managing an entire Oracle Application Express instance.

To log in to the Oracle Application Express Administration Services:

1. In a Web browser, go to the Oracle Application Express Administration Services application. Depending on which setup you are using, Oracle Application Express is installed in one of these locations:

- If your setup uses the embedded PL/SQL gateway:

http://hostname:port/apex/apex_admin

Where:

- hostname is the name of the system where Oracle XML DB HTTP server is installed.

- port is the port number assigned to Oracle XML DB HTTP server. In a default installation, this number is 8080.

- apex is the database access descriptor (DAD) defined in the configuration file.
For users who have upgraded from earlier versions, or who have a custom configuration, this value may be htmldb or something else. Verify your DAD with your Oracle Application Express administrator.

See Also:
"Verifying the Oracle XML DB HTTP Server Port" in Oracle Application Express Application Builder User's Guide

- If your setup uses the Oracle Application Express Listener, go to:

http://hostname:port/apex/apex_admin

Where:

- hostname is the name of the system where Oracle HTTP Server is installed.

- port is the port number assigned to Oracle HTTP Server. In a default installation, for Oracle WebLogic Server this number is 7001, in OC4J this number is 8888, in Oracle Glassfish Server this number is 8080. These defaults are correct at the time this document was written. Please review the related Web server documentation for the latest default port if necessary.

- apex is the mount point defined in the Web Server configuration file.

See Also:
Oracle Application Express Listener documentation

- If your setup uses the Oracle HTTP Server (Apache) with mod_plsql:

http://hostname:port/pls/apex/apex_admin

Where:

- hostname is the name of the system where Oracle HTTP Server is installed.

- port is the port number assigned to Oracle HTTP Server. In a default installation, this number is 7777. You can find information about your Oracle HTTP Server installation's port number from either of the following files:

ORACLE_BASE\ORACLE_HOME\install\portlist.ini

ORACLE_BASE\ORACLE_HTTPSERVER_HOME\Apache\Apache\conf\httpd.conf

Be aware that if you change a port number, it is not updated in the portlist.ini file. You can only rely on this file immediately after installation.

- pls is the indicator to use the mod_plsql cartridge.

- apex is the database access descriptor (DAD) defined in the mod_plsql configuration file.
For users who have upgraded from earlier versions, or who have a custom configuration, this value may be htmldb or something else. Verify the DAD with your Oracle Application Express administrator.

See Also:
"Managing Oracle Database Port Numbers" in Oracle Application Express Installation Guide and ORACLE_BASE\ORACLE_HTTPSERVER_HOME\Apache\modplsql\conf\dads.readme for more information on database access descriptors

The Login page appears.

2. In Username, enter the username you specified when you installed Oracle Application Express.

3. In Password, enter the Oracle Application Express administrator account password you specified when you installed Oracle Application Express.

4. Click Login.
Oracle Application Express Administration Services appears.

Creating a Workspace

From Administration Services, create a workspace. A workspace is a shared work area within the Oracle Application Express development environment that has a unique ID and name. All users in the workspace can access all its applications and scripts. For more information about workspaces, see "About Workspaces".

To create a workspace:

1. Log in to Oracle Application Express Administration Services.
The Instance Administration Home page appears.

2. Click Manage Workspaces.

3. Under Workspace Actions, click Create Workspace.

The Create Workspace Wizard appears.

4. For Identify Workspace, enter the following:

1. Workspace Name - Enter a unique workspace name. This guide uses 2DayPlus for the workspace name.
In general, you want to enter a workspace name that is significant to you. For example, you might enter your own name, your company name, or the name of the project or department to which your application pertains.

If you want to use the same name for both your workspace and schema, enter a workspace name that contains only alphabetic characters. Schema names are restricted to alphabetic characters.

2. Workspace ID - Leave Workspace ID blank to have the new Workspace ID automatically generated. A Workspace ID must be a positive integer greater than 100000.

3. Workspace Description - Enter a workspace description.

4. Click Next.

5. For Identify Schema, enter the following:

1. Re-use existing schema - Select No if you are creating your first workspace.
A schema is a logical container for database objects. In this step, you are creating the container for database objects you add later in this tutorial.

2. Schema Name - Enter a schema name. This guide uses TWODAYPLUS for the schema name.
You must use only alphabetic characters in your schema name.

3. Schema Password - Enter a case-sensitive password.

4. Space Quota (MB) - Select at least 10 MB to accommodate the necessary space for creating the objects required for this guide.

5. Click Next.

6. For Identify Administrator, enter the following:

1. Administrator Username - Accept the default, ADMIN, or enter another user name to be used in Oracle Application Express.
You are creating an account for only one user, yourself as an administrator. To see instructions for creating additional users, see "Creating Additional User Accounts".

2. Administrator Password - Enter a case-sensitive password.

3. Enter the remaining information, including your valid email address, and click Next.
The login credentials for accessing Oracle Application Express are sent to the email address you enter here, if you have configured the email settings for your Oracle Application Express environment.

7. Confirm your selections and click Create Workspace.

Logging In to Your Local Instance

To log in to your local instance of Oracle Application Express, you must have this information:

- URL where you can access Oracle Application Express

- Workspace name you use to develop applications

- Username set up for you for this workspace within Oracle Application Express

- Password set up for you for this workspace within Oracle Application Express

If you set up your development environment, you have your login credentials. Otherwise, contact the person who created your user account to supply the information.

To log in to Oracle Application Express:

1. In a Web browser, go to the Oracle Application Express Login page. Depending on your setup, Oracle Application Express installs to one of these locations:

- If your setup uses the embedded PL/SQL gateway or the Oracle Application Express Listener:

http://hostname:port/apex

- If your setup uses the Oracle HTTP Server (Apache) with mod_plsql:

http://hostname:port/pls/apex

For an explanation of the URLs, see "Logging In to Administration Services".

The Login page appears.

2. Under Login, enter your login credentials.

3. Click Login.

Creating Additional User Accounts

As an administrator, you inherit all the privileges associated with the developer role. If you want to start developing the application shown in this guide, skip this section and go to "Logging In to Your Local Instance".

However, you might want to create user accounts for other developers who share this workspace. Associating users with the workspace grants them access to all applications and scripts within that workspace. You can also create additional user accounts for workspace administrators.

To create a user account:

1. Log in to the workspace where you want to add users. See "Logging In to the Hosted Demo Environment" or "Logging In to Your Local Instance".
The Workspace home page appears.

2. Click Administration.

3. Click Manage Users and Groups.

4. Click Create User.
The Create User page appears.

5. Under User Identification, enter:

1. Username - Enter the username used to log in to the system. Restrictions include:

- Maximum length of 100 characters

- No spaces

- Only these special characters are permitted: ampersand (@) and period (.)

2. Email Address - Enter the valid email address for this user.

3. First Name - Enter the first or given name to further identify the user (optional).

4. Last Name - Enter the last or family name to further identify the user (optional).

5. Description - Enter comments about this user (optional).

6. Under Account Privileges:

1. Default Schemas - Specify the default schema used for data browsing, application creation, and SQL script execution.
When using workspaces that have more than one schema available, this schema is the default. This setting does not control security, only the user's preference.

2. Accessible Schemas (null for all) - Leave this blank to enable the end user to access all applications in the workspace, or enter a colon-delimited list of schemas for which this user has permissions when using the SQL Workshop.

3. User is a workspace administrator - Specify if this user should have workspace administrator privileges.
Administrators are given access to all components. Additionally, they can manage user accounts, groups, and development services. Components may not be available if they are switched off by Instance Administrators.

4. User is a developer - Specify if this user should have developer privileges.
Developers must have access to either Application Builder, SQL Workshop, or both. Components may not be available if they are switched off by Instance Administrators.

5. Application Builder Access - Determines whether a developer has access to the Application Builder.

6. SQL Workshop Access - Determines whether a developer has access to the SQL Workshop.

7. Team Development Access - Determines whether a developer has access to the Team Development.

8. Set Account Availability - Select Locked to prevent the account from being used. Select Unlocked to allow the account to be used.

7. Under Password:

- Password - Enter a case sensitive password.

- Confirm Password - Enter the password again.

- Require Change of Password On First Use - Select No to not require this user to change his or her password at first log in. Select Yes to require the user to change the password immediately after logging in the first time.

8. Under User Groups, optionally select a user group.

9. Click Create User or Create and Create Another.

See also:
"Managing Application Express Users" in Oracle Application Express Administration Guide

3 Getting Started with Oracle Application Express

This section introduces you to areas of the Oracle Application Express user interface. It also shows you how to install the sample objects to use with this guide.

Before you begin, log in to Oracle Application Express. For instructions, see "Accessing Your Development Environment".

Topics:

- About the Workspace Home Page

- What Is Application Builder?

- Installing the Sample Objects

About the Workspace Home Page

When you log in to Oracle Application Express, the Workspace home page appears.

Take a few minutes to explore the product. The following large icons display in the center of the page:

- Application Builder. Use Application Builder to assemble an HTML interface (or application) on top of database objects such as tables and procedures.

- SQL Workshop. Use the SQL Workshop to access tools for viewing and managing database objects.

- Team Development. Use Team Development to track new features, non-feature to do tasks, bugs, and milestones. Users can also provide real-time feedback which then can be categorized into features, to do tasks, or bugs.

- Administration links to the Workspace Administration page.

About Learn More

Click the Learn More button to view an informative introduction to Oracle Application Express. Topics covered include architecture, self service, security, websheets, application development, SQL Workshop, Team Development, administration, and managing development.

What Is Application Builder?

You use the Application Builder component of Oracle Application Express to build your application. Through wizards or your direct input, you can assemble an HTML interface (or application) on top of database objects such as tables and procedures. Each application is a collection of linked pages using tabs, buttons, or hypertext links.

A page is the basic building block of an application. Pages also contain user interface elements such as tabs, lists, buttons, items, and regions. To see the definition of each page belonging to your application, you use the Page Definition page.

The Page Definition contains three main areas:

- Page Rendering lists user interface controls and logic that are executed when a page is rendered. Page rendering is the process of generating a page from the database.

- Page Processing lists logic controls (such as computations and processes) that are evaluated and executed when the page is processed.

- Shared Components lists components used by the current page that can also be referenced by other pages within your application.

Installing the Sample Objects

In Oracle Application Express, users log in to a workspace. You can think of each workspace as a shared work area that separates your objects, data, and applications into a virtual private database.

Before performing any tasks in this guide, you must create the appropriate sample objects within your workspace. These sample objects are copies of the objects that are typically installed in two schemas:

- Human Resources (HR)
The HR schema contains information about the employees and the facilities where they work. Each employee has an identification number, email address, job identification code, salary, and manager. Employees are assigned to a department, and each department is associated with one location that has a full address, including the street name, postal code, city, state or province, and country code.

- Order Entry (OE)
The OE schema tracks product inventories and sales of a company's products, including the product identification number, the product name, the associated associates product category, product descriptions, the weight group (for shipping purposes), the warranty periods, the suppliers, the availability status, and a minimum price.

To create the objects locally in your workspace, import the OEHR Sample Objects application.

Topics:

- Downloading OEHR Sample Objects

- Importing the OEHR Sample Objects

- Viewing Your Database Objects

Tip:
In order to successfully import the objects associated with the OEHR Sample Objects application, your Oracle database must include Oracle Spatial. If your database instance does not include Oracle Spatial, you can install it using Database Configuration Assistant. To learn more, see the Oracle Application Express Installation Guide for your operating environment.

Downloading OEHR Sample Objects

To import the OEHR Sample Objects application, you must download it from the Oracle Technology Network (OTN).

To download the OEHR Sample Objects application from OTN:

1. In your Web browser, go to:

http://www.oracle.com/technetwork/developer-tools/apex/application-express/packaged-apps-090453.html

2. Under Sample Code, click OEHR Sample Objects.

3. Download and save the oehr_sample_objects.zip file to your computer.

4. Unzip and extract the oehr_sample_objects_installer.sql file:

- Microsoft Windows - Double-click the oehr_sample_objects.zip file

- UNIX or Linux - Enter the following command:

$ unzip oehr_sample_objects.zip

Importing the OEHR Sample Objects

After you download and unzip the OEHR Sample Objects application, import it into Oracle Application Express. During the import process, specify installation of both the application and the supporting objects. Installing the application creates the objects and sample data needed to complete the exercises in this guide.

To import and install the OEHR Sample Objects application:

1. Log in to Oracle Application Express.
For instructions, see "Logging In to the Hosted Demo Environment" or "Logging In to Your Local Instance".

2. On the Workspace home page, click Application Builder.
The Application Builder home page appears.

3. Click the Import button.

4. For Specify File, specify the following:

1. Import file - Click Browse and navigate to the oehr_sample_objects_installer.sql file.

2. File Type - Select Database Application, Page, or Component Export.

3. File Character Set - Select the correct character set.

4. Click Next.

Next, you install the imported file.

5. To install an imported file, click Next.
The Install Application Wizard appears.

6. For Install Application, specify the following:

1. Parsing Schema - Select the schema you created when you set up your development environment.

2. Build Status - Select Run and Build Application.

3. Install As Application - Select Auto Assign New Application ID.

4. Click Install.
Once you install the application, you must install the supporting objects.

7. For Install Supporting Objects, select Yes and click Next.

8. Confirm your selections by clicking Install.

9. After the installation is completed, click the Home breadcrumb link at the top of the page.
The Application Builder home page appears.

Checking Your Workspace Storage Space

If you experience problems installing the OEHR Sample Objects application, verify the available space in your workspace. If you do not have enough space, request additional storage space.

If you are a workspace administrator, you can:

- Determine if you have enough storage space. See "Viewing the Workspace Overview Report" in Oracle Application Express Administration Guide.

- Request additional storage space. See "Requesting a New Schema, More Storage, or Terminating Service" in Oracle Application Express Administration Guide.

Deleting the OEHR Sample Objects Application

Deleting the OEHR Sample Objects application and deinstalling the supporting objects completely removes all associated objects and sample data.

To delete the OEHR Sample Objects application:

1. Log in to Oracle Application Express.

2. On the Workspace home page, click Application Builder.
The Application Builder home page appears.

3. Click the OEHR Sample Objects icon.

4. On the Tasks list, click Delete this Application.
The Deinstall page appears.

5. To remove all associated objects and sample data, select Remove Application Definition and Deinstall Supporting Objects.

6. Click Deinstall.

Viewing Your Database Objects

Review the objects you just created by going to Object Browser. Object Browser enables you to browse, create, and edit objects in your database.

To view the objects:

1. On the Workspace home page, click SQL Workshop.

2. Click Object Browser.
Object Browser appears.

Object Browser is divided into two sections:

- Object Selection pane displays on the left side of the Object Browser page and lists database objects of a selected type within the current schema.

- Detail pane displays to the right of the page and displays detailed information about a selected object.

3. From the list in the Object Selection pane on the left, select Tables.
The Detail pane lists the tables in your current schema.

4. In the Object Selection pane, click OEHR_EMPLOYEES from the list.
The Detail pane shows details about the table.

5. Click the Data tab at the top of the Details pane.
The data in the OEHR_EMPLOYEES table appears. Note that other tabs show additional details about the object you select.

6. To search for an object name, enter a case-insensitive term in the Search field.

7. To view all objects, leave the Search field blank.

See also:
"Managing Database Objects with Object Browser" in Oracle Application Express SQL Workshop Guide

4 Building Your Application

In this tutorial, you create a Human Resources (HR) application for a fictitious company called AnyCo Corp. This section shows you how to build the application, modify it, and preview it at different points during the development process.

Before you begin this section:

- Read "Getting Started with Oracle Application Express".

- Ensure you have installed the database objects as described in "Installing the Sample Objects". This applies to both the hosted demo environment and local instance.

Topics:

- About the Application You Build in This Tutorial

- Creating the Initial Application

- Using an Interactive Report

- Modifying the Departments Report

- Adding an Employees Report and Form

- Editing the Employees Report

- Adding a Link on the Home Page to the Employees Report

- Adding a Department Column to the Employees Report

- Linking a Column Value to Another Page

- Adding a List of Values to the Employees Report

- Adding Your Company Name

- Switching Themes to Change the User Interface

About the Application You Build in This Tutorial

This tutorial guides you through the development of a Human Resources (HR) application for a fictitious company called AnyCo Corp. The application enables users to view and modify employee information stored in the OEHR_DEPARTMENTS and OEHR_EMPLOYEES tables.

When building the application, you perform these tasks:

1. Creating the Initial Application: Create an application that includes a Home page and a basic Departments report.

2. Modifying the Departments Report: Expand the report to pull in data from other tables.

3. Using an Interactive Report: Run and use the Interactive Report.

4. Adding an Employees Report and Form: Build an Employee form and report based on the OEHR_EMPLOYEES table.

5. Editing the Employees Report: Add calculated fields to the Employees report.

6. Adding a Link on the Home Page to the Employees Report: Add a link on the Home page.

7. Adding a Department Column to the Employees Report: Modify the Employees report to enable the user to select a department.

8. "Linking a Column Value to Another Page": Add a link on the Departments report that navigates the user to the Employees report.

9. Adding a List of Values to the Employees Report: Add a report as a region that displays department details.

10. Adding Your Company Name: Add your company name so that it appears on all pages in your application.

11. Switching Themes to Change the User Interface: Switch the theme for your application.

Creating the Initial Application

This first exercise guides you through creating your initial application. Using the Create Application Wizard, you create two pages and specify basic application functionality.

The pages created in this section include:

- Home - This page is the first page displayed when the application is run. This page contains a link to the Departments report.

- Departments - This page is an interactive report of all departments.
There are two types of reports, interactive and classic. Interactive is the default when creating applications, converting forms and creating report regions. Interactive reports should be selected when you want to provide user customizations such as filters, sorting, compilation and so on. If you have limited need for this functionality, you are best served by using a classic report.

To create your initial application:

1. Log in to Oracle Application Express.
For instructions, see "Logging In to the Hosted Demo Environment" or "Logging In to Your Local Instance".

2. On the Workspace home page, click Application Builder.

3. Click the Create button.
The Create Application Wizard appears.

Note that each page within a wizard displays the title of the wizard (for example, Create Application). Each wizard page also displays a series of blocks on the left, representing the sequence of steps. The highlighted block indicates the step you are performing.

To orient you, each step in these exercises generally begin with the block label. For example, the first step in the Create Application Wizard highlights the word Method. Therefore, the next step orients you by beginning with the words For Method.

4. For Method, select Database and click Next.

5. Accept the default, From Scratch, and click Next.

6. For Name:

1. Name - Enter AnyCo Corp

2. Application - Accept the default ID. The system provides a unique ID for each application you create in this workspace.

3. Create Application - Accept the default, From scratch.

4. Schema - Select the schema that contains the objects for this tutorial (for example, TWODAYPLUS).

5. Click Next.

Next, add a page to your application.

7. For Pages, specify the following in the Add Page section:

1. Select Page Type - Accept the default, Blank.

Tip:
Explanatory information for each option appears on the right side of the page. This page-level help appears throughout the application.

2. Page Name - Enter Home.

3. Click Add Page.
The Home page is now listed in the top area. Also, note that the Add Page area appears so you can continue adding pages to your initial application.

Next, add a report page on the OEHR_DEPARTMENTS table.

8. In the Add Page section, specify the following:

1. Select Page Type - Select Report.

2. Subordinate to Page - Select Home (1).
This sets up the hierarchy among the pages in your application.

3. Page Source - Accept the default, Table.

4. Table Name - Select OEHR_DEPARTMENTS.
The list shows all tables and views in the schema associated with the application.

5. Implementation - Accept the default Interactive.

6. Click Add Page.
Notice that the pages listed in the Create Application section reflect the hierarchy of the pages in your application.

Next, change the default page name, OEHR_DEPARTMENTS, to Departments.

9. Click the Oehr Departments link.

10. Under Page Definition, change the Page Name to Departments and click Apply Changes.

11. In the Create Application section, click Next.
Next, define some application-level settings.

12. For Tabs, select No Tabs and click Next.

13. For Shared Components, accept the default, No, and click Next.

14. For Attributes, make these changes:

1. Authentication Scheme - Accept the default, Application Express.
Note that Application Express is the default Authentication Scheme. The authentication scheme option enables you to control users' access to the application using Application Express authentication or another type of authentication.

2. Language - Accept the default, English (en)

3. User Language Preference Derived From - Accept the default, Application Primary Language.

4. Date Format - Click the up arrow and select 12-JAN-04.

5. Click Next.

15. For User Interface, select Theme 2 and click Next.

16. For Confirm, verify the information and click Create.
The two pages you created, Home and Departments, appear as icons by default.

Note:
To view the pages in a report instead of as icons, click the View Report icon. Your view setting is retained from session to session.
Because these steps use the default setting, switch back to Icons view before continuing.

Notice that Oracle Application Express adds a Login page automatically to your application.

Congratulations! You created your first application using Oracle Application Express. Next, preview the application to see the application the way it would appear to end users.

Previewing Your Application

You preview your application by running it. Running the application displays the rendered version of the application as end users would see it.

As you create pages, you can view them by running the page individually or by running the entire application. When you run a page or application, the Application Express engine dynamically renders it into viewable HTML based on data stored in the database.

- To run the application, click the Run Application icon.

- To run a specific page, click the Run Page icon.

To preview your application:

1. On the Application home page, click Run Application.
The first time you run an application you are prompted to enter a user name and password. To continue, simply enter your workspace user name and password and then click Login.

2. The first time you run an application you are prompted to enter a user name and password. To continue, simply enter your workspace user name and password and then click Login.
You can run the application using your Application Express login credentials because you chose Application Express Authentication when creating the application. For more information, see "Establishing User Identity Through Authentication" in Oracle Application Express Application Builder User's Guide.

The Home page of your application appears.

Notice that a link to the Departments page appears on the Home page because you set up that hierarchy.

Also notice the Developer toolbar at the bottom of the page. These links appear when you run an application within the development environment. The Developer toolbar offers a quick way to edit the current page, create a page, region, or page control, view session state, or toggle in and out of Debug mode.

3. Click the Departments link.
The Departments report appears.

Modifying the Departments Report

When you run the Create Application Wizard, the wizard creates forms and reports based on the selections you make. Behind the scenes, Application Express writes a query for you to extract the appropriate data from the database.

In this exercise, you modify the query for the Departments report to include information from the OEHR_EMPLOYEES table. Three columns from the OEHR_EMPLOYEES table, Number of Employees, Manager Name and Location, are added to the Departments report. The Manager Name column replaces the Manager Id column and the Location column replaces the Location Id column.

To modify the Departments report:

1. Click the Edit Page 2 link on the Developer toolbar (at the bottom of the page).
The Page Definition for Page 2 appears.

A page is the basic building block of an application. Pages contain user interface elements such as tabs, lists, buttons, items, and regions. To see the definition of each page belonging to your application, you use the Page Definition page. For more information, see "What Is Application Builder?".

2. Under Page Rendering, locate Regions.

3. Expand Region and locate Departments.

4. Right-click Departments and select Edit.

Tip:
You can also double-click Departments.

The Region Definition appears.

5. Scroll down to Source, and replace the default Region Source script with the following:

SELECT d.DEPARTMENT_ID,
d.DEPARTMENT_NAME,
(select count(*)from oehr_employees where department_id = d.department_id)  "Number of Employees",
substr(e.first_name,1,1)||'.'||e.last_name "Manager Name",
c.COUNTRY_NAME "Location"
FROM OEHR_DEPARTMENTS d,
OEHR_EMPLOYEES e,
OEHR_LOCATIONS l,
OEHR_COUNTRIES c
WHERE d.LOCATION_ID=l.LOCATION_ID
AND l.COUNTRY_ID=c.COUNTRY_ID
AND d.DEPARTMENT_ID=e.department_id
AND d.manager_id=e.employee_id
AND instr(upper(d.department_name),upper(nvl(:P2_REPORT_SEARCH,d.department_name)))>0

6. Click Apply Changes.

7. Click Apply Changes to confirm.

8. Right-click Departments and select Edit Report Attributes.

9. Click the Edit icon next to Number of Employees.

10. Under Column Definition, select center for Column Alignment.

11. Click Apply Changes.

Run the Report to View Added Columns

To see how the page looks to end users, run the page. When you run a page, the Application Express engine dynamically renders and processes the page to display viewable HTML.

To run the page:

1. Click the Run Page icon in the upper right corner.

The revised Departments report appears.

Note that the Manager Id and Location Id columns are not available. Also note that the three new columns do not display on the revised report: Number of Employees, Manager Name, and Location. The following steps are required to add these columns to the display and reorder them.

2. To add the new columns, click the Actions menu.
The list of Action options appears.

3. Select Select Columns.
The columns that were added by the new SQL query are in the Do Not Display box.

4. Click the Move All icon to add these three columns to the Display in Report box. The Move All icon looks like the following figure.

5. Verify if the columns are in the following order. If they are not, click up and down arrows to the right of the Display in Report to change the order:

- Department ID

- Department Name

- Number of Employees

- Manager Name

- Location

6. Click Apply.
The Departments page appears and includes the new columns.

Using an Interactive Report

This exercise guides you through some commonly used report options available to users when they run interactive reports. These options allow the user to perform certain tasks quickly.

Topics:

- Save Report Settings as the Default

- Create a Filter

- Change the Sort Order

- Add a Controlled Break

- Display the Single Row View

- Reset Report Settings

You already used the Select Column option from the Actions menu to add columns to the report display. In this section, you run the application and use some of the various search, sort, highlight and reset features to manipulate the Departments interactive report.

This tutorial only touches on some of the most prominent functionality available with interactive reports. For complete details see "Customizing Interactive Reports" in Oracle Application Express Application Builder User's Guide.

Save Report Settings as the Default

Both developers and end users can save an interactive report. However, only a developer can save the report that initially displays, called the Primary Default report.

You can save four types of interactive reports:

- Primary Default (Developer Only). The Primary Default is the report that initially displays. Primary Default reports cannot be renamed or deleted.

- Alternative Report (Developer Only). Enables developers to create multiple report layouts. Only developers can save, rename, or delete an Alternative Report.

- Public Report (End user). Can be saved, renamed, or deleted by the end user who created it. Other users can view and save the layout as another report.

- Private Report (End user). Only the end user that created the report can view, save, rename or delete the report.

To save current report settings as the default:

1. Click the Actions menu.

2. Select Save Report.
The Save Report settings appear.

3. From Save, select As Default Report Settings.

The Default Report Type settings appear

4. Select Primary and click Apply.
The report will show all columns when the user selects the Reset option from the Actions menu or when the page is reset by a Reset Interactive Report command, RIR.

See Also:
For a description of how to save as a report as a Named Report see "Customizing Interactive Reports" in the Oracle Application Express Application Builder User's Guide.

Create a Filter

This exercise shows you how a user can add a filter to the Departments report. This example creates a filter to show all departments with the exception of departments with an Id of 60.

There is more than one way a user can create a filter. The user can add a filter from the:

- Search Bar

- Actions Menu

- Column Heading

The Actions menu offers more options than the others. For a quick filter using the equals operator, the Search Bar or column heading are the quickest methods. For anything else, use the Filter option from the Actions menu.

To create a filter for all departments not equal to 60:

1. Click the Actions menu.

2. Select Filter.
The filter settings display. Note the user can also click the column heading link to create a filter for that column. Creating a filter from the column heading menu, however, is limited to the equal operator.

3. From Operator, select the not equals operator (!=).

4. From Expression, select 60.

5. Click Apply.
The Departments report is displayed with the Department_Id!=60 filter applied. All departments, accept for the IT department with a Department Id of 60, are included in the report.

Notice the filter displays at the top of the report. You can edit, disable, or delete this filter. To edit, click on the filter name. To disable, deselect the check box. To delete, click on the Delete icon that looks like an X over the filter icon.

6. Deselect the check box next to the Department Id!=60 filter to disable it.
The report shows data for all Department Ids.

Change the Sort Order

In this exercise, you learn how the user can reorder the data for each column.

To change the sort order:

1. Click the Actions menu.

2. Select Format and then Sort.
The sort settings are displayed. Note this option is also available for each column by clicking the column heading. The Actions menu is quicker when changing the sort order for multiple columns.

3. Select Department Name for the first column entry.

4. Click Apply.
The report shows the Department Name column in ascending alphabetical order.

Notice the up arrow icon after the Department Name that indicates the column has been sorted in ascending order. You can click on this arrow to resort the column.

Add a Controlled Break

Another way to reformat a report is to create a controlled break. A controlled break enables the user to delineate data into clearly visible groups.

To add a controlled break:

1. Click the Location column heading.
The column heading menu appears.

2. Click the Control Break icon as shown below.
Note this same option is also available from the Actions, Format menu.

The report is reformatted to show a break after each group of rows that share the same location.

Note the Location control break report setting displays under the Search bar.

Display the Single Row View

You can also display details for a row by selecting the Single Row icon.

To display the single row view:

1. Locate the Single Row View icon for the first row.

2. Select the Single Row View icon for the first row.
The details page for the first row appears.

Reset Report Settings

You can revert the report settings back to the saved default settings. When an interactive report is reset, the default settings are applied to the report. An interactive report can be reset by the user and by the developer under the following conditions:

- A user can reset an interactive report if the Reset option is available from the Actions menu. This option is enabled or disabled by the developer. For further details see "Customizing Interactive Reports" in the Oracle Application Express Application Builder User's Guide.

- A developer can specify that an interactive report be reset when it is called from another page. The Reset Interactive Report command, RIR, is used for this purpose. For further details see "Customizing Interactive Reports as a Developer" in the Oracle Application Express Application Builder User's Guide.

To return to the default settings:

1. Click the Report View button.

2. Click the Actions menu and select Reset.

3. When prompted to restore the default settings, click Apply.
The report goes back to the default report settings saved in the previous section.

Adding an Employees Report and Form

In this exercise, you add a report to display employee information and a form to create, update, and delete employee information.

To add an employee report and form:

1. Click the Application ID link on the Developer toolbar (at the bottom of the page).
The Application home page appears.

2. Click Create Page.

3. For Page:

1. Select Form and click Next.

2. Select Form on a Table with Report.
This option creates two pages, a report and form, based on a single table or view.

3. Click Next.

4. For Table/View Owner, accept the default and click Next. This specifies the schema owner.

5. For Table/View Name, select OEHR_EMPLOYEES and click Next.

6. For Define Report Page, make these changes:

1. Implementation - Select Interactive.

2. Page Name - Change to Employees.

3. Region Title - Change to Employees.

4. Breadcrumb - Select Breadcrumb.
The Create Breadcrumb Entry section appears.

5. For Select Parent Entry, click the Home link.
Home appears in the Parent Entry field.

6. Click Next.

7. For Define Report Page, accept the default, Do not use tabs, and click Next.

8. For Define Report Page, press the CTRL key, select the following columns, and click Next:

- EMPLOYEE_ID

- FIRST_NAME

- LAST_NAME

- HIRE_DATE

- SALARY

- COMMISSION_PCT

The columns you selected appear on the Report page when the page is run.

9. For Define Report Page, accept the defaults and click Next.
Note that the default Edit Link image resembles a small piece of paper and pencil.

Next, define the page and region information for the form.

10. For Define Form Page, edit the following:

1. Page Name - Enter Create/Edit Employee

2. Region Title - Enter Create/Edit Employee

3. Entry Name - Enter Create/Edit Employee

4. Click Next.

11. For Primary Key, accept the defaults and click Next.

12. In Define the source for the primary key columns, accept the default, Existing trigger, and click Next.
Your table, OEHR_EMPLOYEES, already has a trigger that populates the primary key.

13. In Select Column(s), select all columns and click Next.
These columns appear in the Create/Edit Employee form when the page is run.

14. In Identify Process Options, accept the defaults and click Next.
These selections enable users to add, update, and create employee records.

15. For Confirm, verify the information and click Finish.

Previewing the Pages

To preview the two pages you just created, run the current page. From the Employees report, you can then preview the form.

To preview the pages:

1. Click the Run Page icon.

The Employees report appears.

Note the following about the Employees report:

- The Search Bar with the Actions menu appears at the top. For more information, see "Using an Interactive Report".

- The column headings are links that enable the user to quickly perform various sorting, filtering and reformatting operations. For more information, see "Using an Interactive Report".

- The Edit icon you selected appears in each row. You can click the Edit icon to update the employee record. Since you created a form based on a table with a report, the wizard automatically linked the report to the form. If you create just a report, as is done in the previous section, "Creating the Initial Application", the wizard automatically links the report to the single row view.

- The Create button appears in the upper right corner. You can click the Create button to add an employee to the underlying table.

- The Employees report includes the six columns you specified. When you selected the columns and applied the changes, Oracle Application Express created the appropriate SQL code in the background to produce this result.

Your data might appear in a different order. If so, ignore this difference and continue with these steps.

2. To review the form you also created, click the Edit icon in an Employee row.
The Create/Edit Employee form appears.

Note the following about the Create/Edit Employee form:

- The form includes Cancel, Delete, and Apply Changes buttons.

- The Hire Date field displays a calendar, which is included because the data type of the underlying column is DATE.

- Fields labeled in red require are mandatory and cannot be left blank or null.

Editing the Employees Report

In this exercise, you create a new column entitled Remuneration to display employee salaries in the Employees report.

Topics:

- Create a Function

- Add a Column

- Previewing the Page

- Changing the Column Format

Create a Function

First, create a function to calculate employees' salaries.

To create a function:

1. Click the Home link on the Developer toolbar.

2. Click SQL Workshop and then SQL Commands.
SQL Commands provides a window where you can run PL/SQL against the database.

3. In the SQL editor, enter the following script:

CREATE OR REPLACE FUNCTION calc_remuneration(
salary IN number, commission_pct IN number)
RETURN NUMBER IS
BEGIN
RETURN ((salary*12) + (salary * 12 * nvl(commission_pct,0)));
END;

When copying and pasting this SQL, make sure there is not an empty line before the first statement, CREATE OR REPLACE FUNCTION.

4. Click Run.
The Results section displays this message:

Function created.

Add a Column

Next, add a column to display the results of the employees' salary calculations.

To add a column:

1. Navigate to the Page Definition for page 3:

1. Click the Application Builder tab.

2. Select the AnyCo Corp application.

3. Click 3 - Employees.
The Page Definition for page 3 appears.

2. Under Regions, locate Employees.

3. Right-click Employees and select Edit.
The Region Definition appears.

4. Scroll down to Source, and replace the existing code with the following:

SELECT "EMPLOYEE_ID",
"FIRST_NAME",
"LAST_NAME",
"HIRE_DATE",
"SALARY",
"COMMISSION_PCT",
calc_remuneration(salary, commission_pct) REMUNERATION
FROM "#OWNER#"."OEHR_EMPLOYEES"

5. Click Apply Changes.

6. Click Apply Changes to confirm.

Previewing the Page

To preview the page, click the Run Page icon in the upper right corner. Notice the Remuneration column does not appear. You must add the column by using the Select Column action.

To display the Remuneration column:

1. Click the Actions menu.

2. Select the Select Columns action.

3. Move the Remuneration column from the Do Not Display box to the Display in Report box.

4. Click Apply.
The Employees Report is displayed and includes the Remuneration column.

Changing the Column Format

Next, change the format of the columns that contain numeric values.

To change the column format:

1. Click Edit Page 3 on the Developer toolbar (at the bottom of the page).
The Page Definition appears.

2. Under Regions, right-click Employees and select the Edit Report Attributes.
The Report Attributes page appears.

3. Locate the Column Attributes section.
Next, change the format of the value in the Salary and Remuneration columns.

4. To edit the Salary format:

1. Click the Edit icon next to SALARY.

2. For Number/Date Format, select $5,234.10 from the list.
Notice that the appropriate format mask appears in the field.

3. Click Apply Changes.

5. Repeat the previous step for REMUNERATION.

6. Click the Run Page 3 icon in the upper right corner to preview the page.
Notice that the numbers in the Salary and Remuneration columns now appear with the dollar sign and include commas and decimals.

Adding a Link on the Home Page to the Employees Report

In this exercise, you add a link on the Home page to take users to the Employees report. This link appears in the Navigation region on the left side of the Home page.

To add a link on the Home page to the Employees report:

1. Navigate to the Page Definition for the Home page, page 1:

1. Click the Application ID link on the Developer toolbar (at the bottom of the page).

2. On the Application home page, click 1 - Home.

2. Under Regions, right-click Navigation and select Edit List.

3. On the Entries by List page, click the Create List Entry button.

4. On the Create/Edit List page, edit the following:

1. Sequence - Change to 20.

2. List Entry Label - Enter Employees

3. Page - Select 3.

5. Click Create.

6. Run the page.

Notice that your Home page now includes a link to Employees.

7. Click Employees to test the link.
The Employees report appears.

Adding a Department Column to the Employees Report

In this exercise, you link the Employees and Departments reports. When you complete this section, the Employees report will have a Departments column showing which department each employee belongs to.

To perform this task, you create a column on the Employees page to enable the user to select a department. You then run the Employees report and add the Departments column to the report. The report settings are saved as the default.

Topics:

- Add a Column

- Display Column in the Report

- Save Report Settings as the Default

Add a Column

In order to filter the Employees report by department, add a Department column to the report.

To add a column:

1. Click on Edit Page 3 in the Developer toolbar.

2. Under Regions, right-click Employees and select Edit.
The Region Definition appears.

3. Scroll down to Source.

4. Replace Region Source with the following SQL:

SELECT e.EMPLOYEE_ID,
e.FIRST_NAME,
e.LAST_NAME,
e.HIRE_DATE,
e.SALARY,
e.COMMISSION_PCT,
calc_remuneration(salary, commission_pct) REMUNERATION,
e.DEPARTMENT_ID,
d.DEPARTMENT_NAME
FROM OEHR_EMPLOYEES e,
OEHR_DEPARTMENTS d
WHERE e.DEPARTMENT_ID=d.DEPARTMENT_ID

5. Click Apply Changes.

6. Click Apply Changes to confirm.
The next section explains how to add the column to the report display and how to use this column to filter employee reports.

Display Column in the Report

When you first run this report, use the Select Columns action to add the Department Name column to the display. Once this column is visible on the report, make this report the default and filter by department.

To add the Department Name column to the report:

1. Click the Run Page 3 icon.

2. Click the Actions menu and select Select Columns.

3. Move Department Name from the Do Not Display box to the last entry in the Display in Report box.

4. Click Apply.
The Employees Report is displayed and includes the Department Name column.

Next, make these report settings the default.

Save Report Settings as the Default

This section describes how to save the current report settings as the Primary Default report. Report settings are any setting made through the Actions menu including: selected columns, filters, sorting, rows per page, format setting such as sort control breaks, highlighting, and so on, and flashback.

Both developers and end users can save interactive reports. However, only a developer can save the report that initially displays, called the Primary Default report.

Once the default settings are saved, these columns are the default display in this report.

To save the current report settings as the default:

1. Run the Employees report page.
The current report default does not include the Department Name column when the report is displayed.

2. Click the Actions menu.

3. Select Save Report.

4. For Save, select As Default Report Settings from the list.

5. Accept the Default Report Type setting, Primary, and click Apply.

Note:
If a reset is performed on this page, these default report settings are used. The Department Name column is displayed by default.

Linking a Column Value to Another Page

In this exercise, you add a link to the Number of Employees column on the Departments report that navigates the user to the Employees report. It also sets the focus to the selected department. The column link includes a Clear Interactive Report command, CIR, to clear the Employees report, when shown, of any filters, control breaks, highlights, aggregates, computed columns, chart settings and flashback settings.

Topics:

- Change Column Value to a Link

- Run the Departments Report

- Create a Highlight to Test Clear Interactive Report Command

Change Column Value to a Link

To make this change, you edit the report attributes on the Departments report to change the value for the Number of Employees column to a link.

To change the column value to a link:

1. Click the Application ID link on the Developer toolbar.

2. Click 2 -Departments.

3. Under Regions, right-click Departments and select Edit Report Attributes.
The Report Attributes page appears.

4. Locate the Column Attributes section.

5. In the Column Attributes section, click the Edit icon next to Number of Employees.

6. Scroll down to the Column Link section.

7. Under Column Link, make these changes:

1. Link Text - Select #Number of Employees#.

2. Page - Enter 3.

3. Select the Reset Pagination check box.

4. Clear Cache - Enter:

3,CIR

The 3 means the cache for page 3 is cleared and the string CIR clears the Employees interactive report of any filters, control breaks, highlights, aggregates, computed columns, chart settings or flashback settings when the report is displayed.

Note:
If you want to reset the interactive report to the default report settings instead of clear the report, replace CIR with RIR. The last saved default report settings are applied to the interactive report.

5. Item 1, Name - Enter IR_DEPARTMENT_ID
By prefixing the item name with IR_, the URL item will be associated with an interactive report column rather than an item on the page.

6. Item 1, Value - Select #DEPARTMENT_ ID#
The Column Link section shows all the options you selected.

In summary, these options enable the following behavior when the end user clicks the link:

- The end user is navigated to page 3 of the Employees report.

- On the Employees report, the selected department is in focus.

- The Employees report is cleared. This means any filters, control breaks, highlights, aggregates, computed columns, chart settings or flashback settings are removed.

- The user is returned to the first set of employee records when the user selects another department.

7. Click Apply Changes.
Note that in the Column Attributes section, the Number of Employees row contains a check mark in the Link column, reflecting the change you just made.

Run the Departments Report

Now, run the report and test the Number of Employees column link from the Departments report. The Employees report is displayed showing all employees that belong to the selected department.

1. Click the Run Page 2 icon.
The Departments report is displayed. Note that end users can now drill down on the data in the Number of Employees column.

2. In the Number of Employees column, click the 3 for the Executive row.
All employees that belong to the Executive department appear in the Employees report.

The Department Id filter is displayed because this report is filtered by the Department Id value for the Executive department, 90, passed to this report from the Departments report. Notice the Clear Interactive Report command is included at the end of the URL in your browser, as shown in this example:

f?p=9257:3:3672543193352902::NO:RP,3,CIR:IR_DEPARTMENT_ID:90

Create a Highlight to Test Clear Interactive Report Command

This exercise demonstrates how to use the CIR command to clear a highlight before displaying the Employees report. To show this, you highlight any rows containing the first name of Neena, then display the Employees report from the Number of Employees column on the Departments report.

To highlight rows in the Employees report:

1. Click the Actions menu and select Format and then Highlight.
The Highlight options appear.

2. For Highlight options make these changes:

1. Name - Enter Neena

2. Background Color - Select [yellow]

3. Text Color - Select [red]

4. Column - Select First Name

5. Operator - Select =

6. Expression - Select Neena

7. Click Apply.

The Employees report appears with the row for Neena highlighted.

3. Next, reset the report.

1. Click the Home breadcrumb.

2. Click Departments link.

3. Click Number of Employees in the Executive row.
The Employees report is displayed with the highlighting cleared, due to the CIR command specified in the column link.

Next, remove the filters you just created.

4. Click the Remove Filter icon to the right of DepartmentID = 90.

5. Click Application ID on the Developer toolbar.

Adding a List of Values to the Employees Report

In this exercise, you add a list of values to the Employees page to display employees by department. You also change the Employees report query, edit the column link on the Department report, and turn off pagination.

Topics:

- Add a List of Values

- Add an Item to Display List of Values

- Change Employees Report Query

- Change Column Link on Department Report

- Turning Off Pagination

Add a List of Values

In this section, you create a list of values that is used to select which department details to view. This is a dynamic list that queries the OEHR_DEPARTMENTS table for a list of all the department names.

To create a list of values:

1. Click Shared Components icon.

2. Under User Interface, select Lists of Values.

3. Click the Create button.

4. Accept the default, From Scratch, and click Next.

5. For Name, enter DEPARTMENTS and select Dynamic.

6. Click Next.

7. For the Query, enter the following SQL:

SELECT department_name d, department_id v
FROM oehr_departments
ORDER BY d

8. Click Create List of Values.

Add an Item to Display List of Values

Now, you create an item in the Department Details region to display the list of departments.

To add an item:

1. Navigate to the Page Definition for page 3, Employees.

2. Under Region, right-click Employees and select Create Page Item.

3. Select Select List and click Next.

4. For Create Item:

1. Item Name - Enter P3_DEPARTMENT_ID

2. Sequence - Enter 10

3. Region - Select Employee (1) 10

4. Click Next.

5. For Item Attributes:

1. Label - Enter Department

2. Accept the remaining defaults and click Next.

6. For Settings:

1. Value Required - Select No.

2. Page Action when Value Changed - Select Redirect and Set Value.

3. Click Next.

7. For Identify List of Values, make these changes:

1. Named LOV - Select DEPARTMENTS

2. Display Null Option - Select Yes

3. Null Display Value - Enter:

- No Department Assigned -

4. Null Return Value - Enter:

-1

5. Click Next.

8. Click Create Item.

Change Employees Report Query

Now, you change the Employees report query to display employees that belong to the selected department.

To change the query:

1. Under Regions, right-click Employees and click Edit.

2. Enter the following SQL for Region Source:

SELECT  e.EMPLOYEE_ID,
e.FIRST_NAME,
e.LAST_NAME,
e.HIRE_DATE,
e.SALARY,
e.COMMISSION_PCT,
calc_remuneration(salary, commission_pct) REMUNERATION,
e.DEPARTMENT_ID,
d.DEPARTMENT_NAME
FROM  OEHR_EMPLOYEES e,
OEHR_DEPARTMENTS d
WHERE  e.DEPARTMENT_ID = d.DEPARTMENT_ID(+) AND
(e.DEPARTMENT_ID = :P3_DEPARTMENT_ID or
(e.DEPARTMENT_ID is null and nvl(:P3_DEPARTMENT_ID,'-1') = '-1'))

3. Click Apply Changes.

Change Column Link on Department Report

Because the Employees query has changed, the Number of Employees column link needs to initialize the P3_DEPARTMENT_ID item to the value of DEPARTMENT_ID.

To change the column link for Number of Employees:

1. Click the Application ID breadcrumb.

2. Click 2 - Departments.

3. Under Regions, right-click Departments and select Edit Report Attributes.

4. Click the Edit icon for Number of Employees.

5. Scroll down to Column Link.

6. For Item 1, select P3_DEPARTMENT_ID.

7. Click Apply Changes.

Turning Off Pagination

Next, turn off pagination for the Department Details report, because only one record (the department details report) displays at a time. If pagination is on, the region that displays the department details includes the information row 1 - 1.

To turn off pagination:

1. Click the Application ID breadcrumb.

2. Click 3 - Employees.

3. Under Regions, right-click Employees and select Edit Report Attributes.

4. Scroll down to Pagination.

5. For Pagination Type, select - No Pagination Selected -.

6. Click Apply Changes.

7. Run the page.

8. From the Department list, select No Department Assigned.

Employee Kimberely Grant appears. This employee is not currently assigned to a department. Therefore, no department details appear. The 1 - 1 you see on this form is part of the Employees report, not part of the Department Details region you just edited.

Tip:
If no records initially display, reload the page and try again.

Adding Your Company Name

You can add a graphical logo or text to your application so that it displays on each page. Your page template determines the display location.

In this exercise, you add your company name to your application.

To add your company name to your application:

1. Navigate to the Application home page. Click Application ID on the Developer toolbar (at the bottom of the page).

2. Click the Edit Application Properties button.
The Edit Application Definition page appears.

3. Under Logo:

1. Logo Type - Select Text.

2. Logo - Enter AnyCo Corp.

3. Logo Attributes - Select Black Text from the pop up list.

4. Click Apply Changes.

5. Click the 1 - Home.

6. Click the Run Page icon in the upper right corner.

The company name now appears on each page in your application.

Switching Themes to Change the User Interface

In this exercise, you switch the current theme to another one for your application. A theme is a collection of templates that defines the application user interface. Each theme contains templates for every type of application component and page control, including individual pages, regions, reports, lists, labels, menus, buttons, and list of values.

Oracle Application Express separates presentation (or user interface themes) from the application logic. You can design your application in one theme, change to another supplied theme, or create and use your own custom theme. By separating the application logic (such as queries, processes, and branches) from the HTML rendering, your application can take advantage of the latest designs and other technological advances without an application rewrite. Each theme provides a complete set of templates that accommodate every user interface pattern that may be needed in an application.

To switch the theme:

1. Click the Application link on the Developer toolbar (at the bottom of the page).

2. On the Application home page, click Shared Components.

3. Under User Interface, click Themes.

4. On the Themes page, click Create.
The Create Theme Wizard appears.

5. For Method, accept the default, From the Repository, and click Next.

6. For Identify Theme, select Theme 1 and click Next.

7. For Confirm, click Create.

8. Click Switch Theme.

9. For Identify Theme, accept the default, Theme 1 (Simple Red), and click Next.

10. For Verify Compatibility, review the information, accept the defaults, and click Next.
The wizard verifies that corresponding templates exist in the selected theme for all templates used in your current application. If a template is missing, it warns you with a message in the Status column. For this tutorial, you can ignore this message because Oracle Application Express maps missing region templates to existing ones.

11. For Confirm Switch, click Switch Theme.

12. Run the page.

The color scheme and display layouts are changed in all your pages.

5 About Deploying Your Application

This section describes basic information about deploying your Oracle Application Express application. It also shows you how to create end users and to determine the URL of your application.

Topics:

- Overview of Deploying Your Application

- Creating End Users

- About Publishing the Application URL

Overview of Deploying Your Application

After building your application in your development environment, you need deploy it so that end users can begin using it. Deploying involves the following steps:

1. Collect your supporting object definitions (CREATE object statements, sample data, images, files, and so on). Review the Database Object Dependencies report to determine which supporting objects to move. See "Viewing Dashboards and Reports" in Oracle Application Express Application Builder User's Guide.

2. Define your supporting objects. This includes the object definitions you collected in the previous step and other supporting objects, such as messages and prerequisites.

3. Export the application with its supporting objects.

4. Import and install the exported files.

Using Oracle Application Express greatly simplifies the deployment process. It enables you to migrate the application definition, associated files, and all supporting objects in just a few steps.

See also:
"Deploying an Application" in Oracle Application Express Application Builder User's Guide.

Creating End Users

After moving your application to a production environment, you must now create user accounts within Oracle Application Express for all your end users.

To create end user accounts:

1. Navigate to the Workspace home page.

2. Click Administration.

3. Click Manage Users and Groups.

4. Click the Create User button.
The Create User page appears.

5. Under User Identification, enter:

1. Username - Enter the username used to log in to the system. Restrictions include:

- Maximum length of 100 characters

- No spaces

- Only these special characters are permitted: ampersand (@) and period (.)

2. Email Address - Enter the valid email address for this user.

3. First Name - Enter the first or given name to further identify the user (optional).

4. Last Name - Enter the last or family name to further identify the user (optional).

5. Description - Enter comments about this user (optional).

6. Under Account Privileges:

1. Default Schemas - Specify the default schema used for data browsing, application creation, and SQL script execution.
When using workspaces that have more than one schema available, this schema is the default. This setting does not control security, only the user's preference.

2. Accessible Schemas (null for all) - Leave this blank to enable the end user to access all applications in the workspace, or enter a colon-delimited list of schemas for which this user has permissions when using the SQL Workshop.

3. User is a workspace administrator - Specify if this user should have workspace administrator privileges.
Administrators are given access to all components. Additionally, they can manage user accounts, groups, and development services. Components may not be available if they are switched off by Instance Administrators.

4. User is a developer - Specify if this user should have developer privileges.
Developers must have access to either Application Builder, SQL Workshop, or both. Components may not be available if they are switched off by Instance Administrators.

5. Application Builder Access - Determines whether a developer has access to the Application Builder.

6. SQL Workshop Access - Determines whether a developer has access to the SQL Workshop.

7. Team Development Access - Determines whether a developer has access to the Team Development.

8. Set Account Availability - Select Locked to prevent the account from being used. Select Unlocked to allow the account to be used.

7. Under Password:

- Password - Enter a case sensitive password.

- Confirm Password - Enter the password again.

- Require Change of Password On First Use - Select No to allow the user to use the same password until it expires. Select Yes to require the user to change the password immediately when logging in the first time.

8. Under User Groups, optionally select a user group.

9. Click Create User or Create and Create Another.

See also:
"Managing Application Express Users" in Oracle Application Express Administration Guide

About Publishing the Application URL

After deploying your application, you must now publish its URL so end users know how to access it.

To determine the URL:

1. Log in to Oracle Application Express on the production environment.

2. Select the application.

3. On the Application home page, position the mouse over the Run Application icon.

4. Note the URL that displays in the status bar at the bottom of the page.

For example:

http://apex.oracle.com/pls/apex/f?p=11563:1:3397731373043366363

Where:

- apex.oracle.com is the URL of the server.

- pls is the indicator to use the mod_plsql.

- apex is the database access descriptor (DAD) name. The DAD describes how Oracle HTTP Server connects to the database server so that it can fulfill an HTTP request. The default value is apex.

- f?p= is a prefix used by Oracle Application Express.

- 11563 is the application being called.

- 1 is the page within the application to be displayed.

- 3397731373043366363 is the session number, which is unique for every user's access to the application. Do not include session numbers as a part of the URL communicated to end users.

To run this example application, you would go to this URL:

http://apex.oracle.com/pls/apex/f?p=11563:1

See also:
"Deploying an Application" in Oracle Application Express Application Builder User's Guide

6 About Globalization

This section describes some basic information about globalization. It also leads you through the steps to specify how the application determines global identification.

Topics:

- About Language Identification and Rendering

- Specifying the Method for Global Identification

See also:
"Managing Application Globalization" in Oracle Application Express Application Builder User's Guide

About Language Identification and Rendering

You can develop applications in Application Builder that run concurrently in different languages. This feature enables different users to view the application in their own language and data in the appropriate formats.

When rendering a page in the application, Oracle Application Express first determines the language for an application based on the method you specified. Then, the Application Express engine alters the session language and territory settings for a specific page request. It then looks for a translated application in the appropriate language. If the Application Express engine finds that language, it renders the application using that definition. Otherwise, it renders the application in the base (or primary) application language.

Even if your application is not translated, the language display determines the format for displaying data so that end users view numbers, dates, and currency in the appropriate formats.

Specifying the Method for Global Identification

As part of the application definition settings, you can specify how the application determines which language and formats to display. You can base it on the user's browser language preference or restrict it to the language you specify.

To specify the method for determining global identification:

1. Click Application Builder and then select the application.

2. Click Shared Components.

3. Under Globalization, click Globalization Attributes.

4. Under Globalization, specify the following:

1. Application Primary Language - Select the language you used when developing the application.

2. Application Language Derived From - Select Browser (use browser language preference).
This option enables users to view the application in the language specified in their browsers.

3. Application Date Format - Determines the date format to be used in the application.

4. Application Timestamp Format - Determines the timestamp format to be used in the application.

5. Application Timestamp Time Zone Format - Determines the timestamp with time zone format to be used in the application.

6. Automatic Time Zone - Controls the setting of the database session time zone. When set to Yes, the client time zone is derived from the client's Web browser and set for the duration of the Application Express session.

7. Automatic CSV Encoding - Select Yes or No.
Automatic CSV Encoding controls the encoding of all comma-delimited (CSV) report output in an application. If Automatic CSV Encoding is set to Yes, CSV report output is properly converted to a character set compatible with localized desktop applications. The character set for the CSV encoding is determined by the Application Language Derived From setting.

For example, the end user whose browser setting is German (de) sees these changes on the Employees page of AnyCo Corp:

- The euro currency symbol appears for the amounts in the Salary and Remuneration columns.

- The amounts reflect the formatting used in Germany (commas and decimals).

Note that the application fields are not yet translated. For instructions on translating your application, see "Managing Application Globalization" in Oracle Application Express Application Builder User's Guide.

7 Next Steps

Now that you have completed this guide, you are ready to take advantage of other resources to expand your knowledge of Oracle Application Express and boost your productivity. This section describes those resources.

Note:
Consider deleting the sample objects required to complete this tutorial, which will free up space in your workspace. For instructions, see "Deleting the OEHR Sample Objects Application".

Topics:

- Downloading Public Packaged Applications and Sample Code

- Additional Resources

Downloading Public Packaged Applications and Sample Code

If you are using Oracle Application Express 2.2 or later, you can download packaged applications and sample code from the Oracle Application Express Web site. Packaged applications are fully functional applications that you can view, use, and customize. Sample code is provided as packaged applications that contain code examples to explain a solution.

To download public packaged applications and sample code:

1. In a Web browser, go to the following Web sites:

http://www.oracle.com/technetwork/developer-tools/apex/application-express/packaged-apps-090453.html

2. Scroll down to review the available applications or code.

3. Click the link for the file you want to download, and save the file to your computer.

4. Unzip the file.

5. Log in to the workspace in Oracle Application Express where you want to use the packaged application or code.

6. Import and install the application.
Follow the same steps you performed when installing the sample objects for this guide. See "Importing the OEHR Sample Objects".

Additional Resources

To continue learning about Oracle Application Express, review these additional resources designed for Application Express users.

Oracle Learning Library

Search for free online training content, including Oracle by Example (OBE), demos, and tutorials. To access the Oracle Learning Library, go to:

http://www.oracle.com/technetwork/tutorials/index.html

Training Courses

You can attend training courses for Oracle Application Express. To review these courses, go to the following Web site and enter Application Express in the search criteria field:

http://education.oracle.com

Oracle Technology Network

Oracle Technology Network (OTN) is a central Web site for Oracle Application Express resources and information. In addition to downloading the latest product version, sample code, and packaged applications, the OTN site includes:

- Discussion forum, where you can post questions and search for solutions

- How-to documents, which are technical notes written by subject matter experts

- Quick tour of the product

- News and magazine articles related to Oracle Application Express

To access the Oracle Application Express page on OTN, go to the following Web site:

http://www.oracle.com/technetwork/developer-tools/apex/overview/index.html

Index
A  B  C  D  E  F  G  H  I  L  N  O  P  Q  R  S  T  U  W

A

Actions menu

Select Columns action, 4.3.1

adding, 4.5

an Employees form, 4.5

an Employees report, 4.5

breadcrumbs, 4.5

columns, 4.6.2

end users, 5.2

functions, 4.6.1

links, 4.7

users, 2.4

workspaces, 2.3.2

Administration

Dashboards, 3.1

Manage Service, 3.1

Manage Users and Groups, 3.1

Monitor Activity, 3.1

Administration icon, 3.1 AnyCo Corp

about, 4.1

about building the application, 4

application

about Departments report, 4.3

about Home page, 4.2.1

adding company name, 4.11

creating, 4, 4.2

deploying, 5, 5.1

globalizing, 6

previewing, 4.2.1

running, 4.2.1

specifying a language preference, 6.1

Application Builder

about, 3.2

Application Express engine

about, 1.2

Application Express Listener, 1.2 application overview of, 4.1 architecture

understanding, 1.2

Authentication scheme

selecting, 4.2

B

breadcrumb

creating, 4.5

C

code

downloading samples, 7.1, 7.1

column

changing format, 4.6.4

creating, 4.6.2

column link

defining Link Text, 4.9.1

editing, 4.9.1

columns

adding, 4.3.1

company name

adding to application, 4.11

control break

adding, 4.4.4

Create Application Wizard

about, 4.2

creating

applications, 4, 4.2

breadcrumbs, 4.5

columns, 4.6.2

end users, 5.2

functions, 4.6.1

links, 4.7

user accounts, 2.4

workspaces, 2.3.2

D

deleting

sample objects, 3.3.2.2

demo environment

accessing, 2.2

logging in to, 2.2.1

Departments report

changing value to link, 4.9.1

modifying the query for, 4.3

deploying

an application, 5

overview of, 5.1

deployment

about, 5

Developer toolbar

about, 4.2.1

about Application Id link, 4.5

developers

about, 1.4

development environment

accessing, 2

prerequisites, 2.1

downloading

sample code, 7.1

sample objects, 3.3.1

E

embedded PL/SQL gateway, 1.2

Employees

sorting by department, 4.10

Employees form

adding, 4.5

Employees report

adding, 4.5

adding a column, 4.6.2

adding a Department column, 4.8.1

adding a link, 4.7

adding list of values, 4.10

changing column format, 4.6.4

Create/Edit Employee form, 4.5.1

creating a function, 4.6.1

defining source for primary key, 4.5

editing, 4.6

end users

about, 1.4

creating, 5.2

environment

setting up, 2.3

F

filter

deleting, 4.4.2

disabling, 4.4.2

editing, 4.4.2

form

adding, 4.5

function

creating, 4.6.1

G

global identification

specifying a method, 6.2

Globalization settings

Application Language Derived From, 6.2

Application Primary Language, 6.2

Automatic CSV Encoding, 6.2

H

Home page

adding links to, 4.7

hosted demo environment

logging in to, 2.2.1

hosted environment

accessing, 2.2

signing up, 2.2

HR schema

about installing, 3.3

Human Resources (HR) schema

about installing, 3.3

I

importing

sample objects, 3.3.2

installing

sample objects, 3.3

Instance administrator

about, 1.4

interactive report

using, 4.4

interactive report types

Alternative Report, 4.4.1

Primary Default, 4.4.1

Private Report, 4.4.1

Public Report, 4.4.1

Interactive Reports

adding a column link, 4.9.1

interactive reports, 4.5

adding, 4.2

adding a column, 4.6.2

adding columns from other tables, 4.3

adding controlled break, 4.4.4

changing column format, 4.6.4

changing sort order, 4.4.3

creating a filter, 4.4.2

creating a function, 4.6.1

editing, 4.6

resetting, 4.4.6

saving default, 4.4.1

single row view, 4.4.5

triggers, 4.5

L

language

method for determining, 6.2

preference, 6.1

Learn More button, 3.1 link

adding to Home page, 4.7

creating, 4.7

linking

to another page, 4.9

local environment

logging in to, 2.3.3

setting up, 2.3

local instance, 2.3.3

logging in to, 2.3.3

logging in to

Application Express, 2.3.3

hosted demo environment, 2.2.1

local instance, 2.3.3

Oracle Application Express Administration Services, 2.3.1

logo

adding to an application, 4.11

N

name

adding to application, 4.11

O

Object Browser

about Object Selection list, 3.3.3

about Object Selection pane, 3.3.3

viewing objects, 3.3.3

objects

viewing, 3.3.3

OEHR sample objects, 3.3.1, 3.3.2

deleting, 3.3.2.2

OEHR sample objects application, 3.3 Oracle Application Express

about, 1.1

about Application Express Administration Services, 2.3.1

about workspaces, 1.3.1

additional resources, 7.1, 7.2

architecture, 1.2

getting started with, 3

understanding the environment, 1.3

Oracle Application Express Administration Services

logging in to, 2.3.1

Oracle HTTP Server (Apache), 1.2 Oracle Technology Network

accessing, 7.2

Order Entry (OE) schema

about installing, 3.3

OTN

accessing, 7.2

P

packaged application

downloading, 7.1

Page Definition

about, 3.2

Page Processing section, 3.2

Page Rendering section, 3.2

Shared Components section, 3.2

pages

about, 3.2

linking to, 4.9

previewing, 4.3.1, 4.5.1, 4.6.3, 4.6.3

running, 4.3.1, 4.5.1, 4.6.3, 4.6.3

prerequisites

accessing development environment, 2.1

previewing

applications, 4.2.1

pages, 4.3.1, 4.5.1

publishing

URL for application, 5.3

Q

query

modifying, 4.3

R

Region Definition

editing, 4.6.2

reports, 4.2

adding, 4.2, 4.5

adding a column, 4.6.2

adding a column link, 4.9.1

adding columns from other tables, 4.3

adding links, 4.7

changing column format, 4.6.4

creating a function, 4.6.1

editing, 4.6

triggers, 4.5

resetting

interactive report settings, 4.4.6

resources

about, 7.2

Discussion forum, 7.2

How-to documents, 7.2

Quick tour, 7.2

training courses, 7.2, 7.2

Run Application icon, 4.2.1 Run Page icon, 4.2.1, 4.3.1 running

applications, 4.2.1

pages, 4.3.1, 4.5.1

S

sample application

building, 4

sample code

downloading, 7.1, 7.1

sample objects, 3.3

about, 3.3

about Human Resources (HR) schema, 3.3

about Order Entry (OE) schema, 3.3

checking space, 3.3.2.1

deleting, 3.3.2.2

downloading, 3.3.1

importing, 3.3.2

installing, 3.3

viewing, 3.3.3

single row view

in interactive reports, 4.4.5

space

checking available storage, 3.3.2.1

storage

checking available, 3.3.2.1

T

themes

about, 4.12

switching, 4.12

triggers

defining, 4.5

U

URL

determining, 5.3

publishing, 5.3

user interface

changing using themes, 4.12

user privileges

about, 1.4

user roles

about, 1.4

developer, 1.4

end user, 1.4

Instance administrator, 1.4

workspace administrator, 1.4

users

relationship with schemas, 1.3.1

relationship with workspaces, 1.3.1

users accounts

creating, 2.4

W

workspace administrators

about, 1.4

Workspace home page

about, 3.1

workspaces

about, 1.3.1

checking available storage, 3.3.2.1

creating, 2.3.2

relationship with schemas, 1.3.1

requesting space, 3.3.2.1

users, 1.3.1

Oracle Legal Notices

Copyright Notice

Copyright © 1994-2014, Oracle and/or its affiliates. All rights reserved.

Trademark Notice

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

Restricted Rights Notice

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Hazardous Applications Notice

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Third-Party Content, Products, and Services Disclaimer

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Alpha and Beta Draft Documentation Notice

If this document is in preproduction status:

This documentation is in preproduction status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.