TJA Messages 100-199
100
Invalid Tuxedo JCA Adapter configuration file name.
Description
The specified configuration file name is not a valid file name.
Action
Check your ra.xml
file and update it with correct file name.
101
Specified Tuxedo JCA Adapter configuration file does not exist.(filename)
Description
The specified configuration file name filename does not exist.
Action
Corret the configuration file information in the ra.xml
file.
102
No read access to Tuxedo JCA Adapter configuration file.(filename)
Description
It is required to have at least read
access permission to the configuration file in order to properly process the configuration. However, the adapter does not have the correct access permission to the configured configuration file.
Action
Either correct the configuration file name in the ra.xml
file if is incorrectly configured, or change the permission of the file to allow Tuxedo JCA Adapter to access it.
103
Specified Tuxedo JCA Adapter configuration is not a file.(fname)
Description
The specified configuration file is not a plain text file.
Action
Correct the configuration file information in the ra.xml
file.
104
Error encountered while checking specified Tuxedo JCA Adapter configuration file.(fname)
Description
There are unspecified error occurred while checking the configuration file type and permission.
Action
Change the file type information to allow correct access.
105
No key file configured to Tuxedo JCA Adapter.
Description
There is no key file configured for Tuxedo JCA Adapter. This message is informational. However, if session security is required then key file is also required, without being configured may cause encryption service problem later on.
Action
Check configuration to see whether any session security is DM_PW or APP_PW, or the SSL is configured for any Local Access Point. If at least one condition is true then the configuration file should contain password, and should run the configuration file through DMConfigChecker to encrypt these passwords, and add the generated key file to the
ra.xml
file.
106
Invalid Tuxedo JCA Adapter key file name.(keyfile)
Description
The specified key file name keyfile is not a valid file name.
Action
Correct the key file configuration information in ra.xml
file.
107
Specified Tuxedo JCA Adapter key file does not exist.(keyfile)
Description
The specified key file in the ra.xml
does not exist.
Action
Correct this error in the ra.xml
with correct key file name.
108
No read access to Tuxedo JCA Adapter key file.(keyfile)
Description
It is required to have at least read
access permission to the key file in order to properly process the encrypted passwords. However, the adapter does not have the correct access permission to the configured key file.
Action
Either correct the key file name in the ra.xml
file if is incorrectly configured, or change the permission of the file to allow Tuxedo JCA Adapter to access it.
109
Specified Tuxedo JCA Adapter key file is not a file.(keyfile)
Description
The configured key file keyfile is not a plain file.
Action
Correct the key file informaton in the ra.xml
file.
110
Error encountered while checking specified Tuxedo JCA Adapter key file.(keyfile)
Description
There are unspecified error occurred while checking the key file type and permission.
Action
Change the file type information to allow correct access.
111
No Tuxedo JCA Adapter encryption service.
Description
Failed to instantiate encryption service. This is information; however, if password is needed in the configuration file then encryption service is required.
Action
Check the configuration file to determine whether encryption service is required. If it is required then should add the key file information to the ra.xml
file.
112
Unable to start Tuxedo JCA Adapter encryption server.
Description
Failure encountered while trying to instantiate a copy of encryption service.
Action
Check for previous failure message to determine the true cause of the failure and correct it accordingly.
113
Failed to start transaction service.
Description
The Tuxedo JCA Adapter failed to start transaction service.
Action
Contact your Oracle Technical Support.
114
Failed to start listener for Local Access Point lap.
Description
The Tuxedo JCA Adapter failed to start listening end point for Local Access Point lap.
Action
Check the other related error message logged before to determine the course of correction.
115
Failed to start session sessName for ON_STARTUP connection policy.
Description
When a session's profile specified the connection policy to be ON_STARTUP then the session will be started by Tuxedo JCA Adapter when adapter is started. When this error message is logged it means Tuxedo JCA Adapter failed to start a session with session name sessName automatically.
Action
Check the error messages logged previously to determine the cause of the failure.
116
Invalid xaAffinity property value.(val)
Description
The xaAffinity
is configured with unsupported value. When xaAffinity
is configured with "yes" or "true" then the xaAffinity
is enabled; when xaAffinity
is configured with "no" or "false" then the xaAffinity
is disabled. The default value is enabled.
Action
Correct the xaAffinity
property with correct value in ra.xml
file.
117
ERROR: msg
Description
The SAX parser failed to parse the configuration file.
Action
Check the error message msg and correct the configuration accordingly.
118
FATAL: msg
Description
The SAX parser encountered fatal error while parsing the configuration file.
Action
Check the error message msg and correct the configuration accordingly.
119
WARN: msg
Description
The SAX parser encountered warning situation while parsing the configuration file.
Action
Check the error message msg and correct the configuration accordingly.
120
Error encountered while parsing configuration file, stop processing!
Description
There is at least one error encountered while parsing the configuration file, the Tuxedo JCA Adapter will stop processing it.
Action
Check the previous error message to determine the true cause of the failure.
121
Invalid Tuxedo JCA Adapter configuration file name.(config)
Description
The configuration file specified in the command line is not a valid file.
Action
Use the correct the configuration file in DMConfigChecker
.
122
Specified Tuxedo JCA Adapter configuration file does not exist.(config)
Description
The configuration file specified in the command line does not exist.
Action
Use the correct configuration file name in DMConfigChecker
.
123
No read access to Tuxedo JCA Adapter configuration file.(config)
Description
The configuration file specified in the DMConfigChecker
command line does not have read permission.
Action
Change the permission of the configuration file config.
124
Specified Tuxedo JCA Adapter configuration file is not a file.(config)
Description
The configuration file specified in the DMConfigChecker
command line is not a file.
Action
Correct the configuration in the DMConfigChecker
command line.
125
Invalid Tuxedo JCA Adapter key file name.(keyfile)
Description
The key file specified in the DMConfigChecker
command line is not a valid.
Action
Correct the key file name in the DMConfigChecker
command line.
126
No read access to Tuxedo JCA Adapter key file.(keyfile)
Description
The Tuxedo JCA Adapter does not have read permssion to the key file specified in the DMConfigChecker
command line.
Action
Correct the key file with correct permission.
127
Specified Tuxedo JCA Adapter key file is not a file.(keyfile)
Description
The key file specified in the DMConfigChecker
command line is not a file.
Action
Use correct key file name for the DMConfigChecker
.
128
Corrupted or invalid key file specified.(keyfile)
Description
The key file specified in the DMConfigChecker
command line is corrupted.
Action
Use the correct key file in the CMConfigChecker
command line.
129
The remote gateway does not support Application Level Keep Alive, this feature is disabled for TDomain session sessNmae.
Description
The configured remote access point does not support Application Level Keep Alive, so this feature is disabled for session sessName.
Action
Make sure the remote access point is correctly configured.
130
Established connection to remote domain rapid.
Description
Informational message indicating the connection to remote domain rapidis established.
Action
Nothing.
131
Invalid KeyStore file name.(store)
Description
The configured KeyStore file name store is not valid.
Action
Correct it in the Tuxedo JCA Adapter configuration file.
132
Specified KeyStore file doesnot exist.(store)
Description
The configured KeyStore file store does not exist.
Action
Configure the correct KeyStore file name in the DMCONIG
.
133
No read access to KeyStore file.(store)
Description
Tuxedo JCA Adapter does not have read access to the configured key store file store).
Action
Change the permission of the KeyStore file name.
134
Specified KeyStore file is not a file.(store)
Description
The configured KeyStore file store is not a file.
Action
Correct the KeyStore information in the configuration.
135
JKS or PKCS12 KeyStore type not available.(store)
Description
The JKS or PKCS12 key store types are not available.
Action
Check you JVM vendor with your Java installation.
136
KeyStore does not support JKS.(reason: rsn)
Description
The key store does not support JKS type of key store, the reason is rsn.
Action
Correct the problem according to rsn.
137
Failed to load KeyStore.(store)
Description
Failure occurred while loading KeyStore store.
Action
Check the integrity of your key store file, or correct the key store information in the configuration file.
138
Certificate cannot be loaded.(reason: rsn)
Description
CertificateException occurred while loading the certificate.
Action
Check the integrity of your key store file, or correct the key store information in the configuration file.
139
Failed to create SSLServerSocketFactory.(reason: rsn)
Description
The adapter failed to create SSLServerSocketFactory.
Action
Check the reason why it failed as described by rsn and correct the problem accordingly.
140
Failed to create SSLSocketFactory.(reason: rsn)
Description
The adapter failed to create SSLSocketFactory.
Action
Check the reason why it failed as described by rsn and correct the problem accordingly.
141
Failed to create SSLServerSocket.(reason: rsn)
Description
The adapter failed to create SSLServerSocket.
Action
Check the reason why it failed as described by rsn and correct the problem accordingly.
142
Failed to create SSLSocket.(reason: rsn)
Description
The adapter failed to create SSLSocket.
Action
Check the reason why it failed as described by rsn and correct the problem accordingly.
143
Failed to decrypt KeyStore password.(reason: rsn)
Description
Failed to decrypt KeyStore password.
Action
Make sure the key file is correctly configured and the password is properly encrypted in the configuration file.
144
Exception occurred during SSL handshake.
Description
There is an exception occurred during SSL handshake, the nature of exception is logged as part of this message.
Action
Check the logged exception message for the cause of the failure and fix the problem accordingly.
145
Exception occurred while reading from network(ctx).(reason: rsn)
Description
Exception occurred while the adapter is reading from the network using context ctx, and reason of the exception is described in rsn.
Action
Check the reason of the exception and fix the problem accordingly.
146
Application Managed local transaction timed out.(XID xid)
Description
The adapter managed local transaction with XID xid has been timed out by the adapter.
Action
Informational no action required.
147
Error encountered while parsing configuration file, stop processing!
Description
There is at least one error encountered while parsing the configuration file, the Tuxedo JCA Adapter will stop processing it.
Action
Check the previous error message to determine the true cause of the failure.
148
Exception while process Selector: msg
Description
Tuxedo JCA Adapter failed to open on selector, the cause of the failure is described in detail.
Action
Correct the situation according to description given in this message.
149
User does not have write permission of the specified configuration file filepath
Description
User does not have the required write permission of the configuration file filepath.
Action
Correct the file permission of the specified configuration file.
150
Usage: DMConfigChecker_class_name
config_file_name [decryption_key_filename]
Description
The usage of the DMConfigChecker tool class.
Action
Informational.
151
Create key file key_file_name
Description
DMConfigChecker
creates a key file with name key_file_name.
Action
Informational, no action required.
152
Specified password longer than maximum allowed length max_len for element element_name.
Description
The password specified in the configuration file is longer than maximum allowed password length for element element_name. The maximum Tuxedo password length is 30 characters.
Action
Correct the password actually used and update the password in the configuration file.
153
There is no required password specified for element element_name.
Description
An empty password element is configured.
Action
Insert the correct password into the XML element as specified in the message.
154
Configured Tuxedo application password longer than allowed maximum of 30 characters.
Description
The configured Tuxedo application password is longer than 30 characters.
Action
Correct the password in the configuration file.
155
Configured local access point domain password longer than allowed maximum of 30 characters for session (lap_name, rap_name).
Description
The configure password for local access point in a Domain password pair is too large. The legally allowed maximum length is 30 characters.
Action
Correct the password in the configuration file.
156
Configured remote access point domain password longer than allowed maximum of 30 characters for session (lap_name, rap_name).
Description
The configure password for remote access point in a Domain password pair is too large. The legally allowed maximum length is 30 characters.
Action
Correct the situation according to description given in this message.
157
Failed to activate default global import service, no imported service available!
Description
Tuxedo JCA Adapter was not able to activate default imported service. The consequence is there is not imported service since user did not configure one.
Action
Look for the true cause of the failure in previous message.
158
Default global imported service activated!
Description
The default global imported service is activated by the Tuxedo JCA Adapter.
Action
Informational, no action required.