LIBSCA Messages 200-299
200
ERROR: Cannot convert from bool parameter to type
Description
An attempt to convert an operation parameter declared bool
to a Tuxedo FML32 type other than FLD_CHAR has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
201
ERROR: Cannot convert from char parameter to type
Description
An attempt to convert an operation parameter declared char
to a Tuxedo FML32 type other than FLD_CHAR has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
202
ERROR: Cannot convert from long long parameter to type
Description
An attempt to convert an operation parameter declared long long
to a Tuxedo FML32 type other than FLD_LONG has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
203
ERROR: Parameter name of type long long is outside of range of FLD_LONG
Description
An attempt to convert an operation parameter declared long long
to a Tuxedo FML32 FLD_LONG value resulted in an overflow.
Action
Check the program code.
See Also
SALT SCA Programming Guide.
204
ERROR: Cannot convert from unsigned long long parameter to type
Description
An attempt to convert an operation parameter declared unsigned long long
to a Tuxedo FML32 type other than FLD_LONG has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
205
ERROR: Parameter name of type unsigned long long is outside of range of FLD_LONG
Description
An attempt to convert an operation parameter declared unsigned long long
to a Tuxedo FML32 FLD_LONG value resulted in an overflow.
Action
Check the program code.
See Also
SALT SCA Programming Guide.
206
ERROR: Cannot convert from long parameter to type
Description
An attempt to convert an operation parameter declared long
to a Tuxedo FML32 type other than FLD_LONG has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
207
ERROR: Cannot convert from int parameter to type
Description
An attempt to convert an operation parameter declared int
to a Tuxedo FML32 type other than FLD_LONG has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
208
ERROR: Cannot convert from unsigned int parameter to type
Description
An attempt to convert an operation parameter declared unsigned int
to a Tuxedo FML32 type other than FLD_LONG has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
209
ERROR: Cannot convert from short parameter to type
Description
An attempt to convert an operation parameter declared short
to a Tuxedo FML32 type other than FLD_SHORT has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
210
ERROR: Cannot convert from float parameter to type
Description
An attempt to convert an operation parameter declared float
to a Tuxedo FML32 type other than FLD_FLOAT has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
211
ERROR: Cannot convert from double parameter to type
Description
An attempt to convert an operation parameter declared double
to a Tuxedo FML32 type other than FLD_DOUBLE has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
212
ERROR: Cannot convert from long double parameter to type
Description
An attempt to convert an operation parameter declared long double
to a Tuxedo FML32 type other than FLD_DOUBLE has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
213
ERROR: Cannot convert from string parameter to type
Description
An attempt to convert an operation parameter declared std::string
to a Tuxedo FML32 type other than FLD_STRING has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
214
ERROR: Cannot convert from char* parameter to type
Description
An attempt to convert an operation parameter declared char *
to a Tuxedo FML32 type other than FLD_STRING has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
215
ERROR: Cannot convert from struct carray_t parameter to type
Description
An attempt to convert an operation parameter declared struct carray_t*
or CARRAY_T*
to a Tuxedo FML32 type other than FLD_CARRAY has been detected. This is an invalid conversion.
Action
Check that field table settings and operation method declaration are compatible.
See Also
SALT SCA Programming Guide.
216
ERROR: Unknown SCA operation parameter type type
Description
An unrecognized operation method parameter has been encountered.
Action
Check operation method declaration to make sure that a supported type is used.
See Also
SALT SCA Reference.
217
ERROR: Fchg failed
Description
An internal error occurred when transforming a series of operation method parameters to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
218
ERROR: Cannot find FML field name for parameter name, errormessage
Description
The FML or FML32 field name could not be found for the parameter indicated.
Action
Verify that the FML or FML32 environment is set properly, or that the binding.atmi/fieldTablesLocation(32) and binding.atmi/fieldTables(32) are specified in SCDL configuration.
See Also
SALT SCA Administration Guide.
219
ERROR: Fchg failed
Description
An internal error occurred when transforming a series of operation method parameters to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
220
ERROR: Cannot find field id for fieldname
Description
The FML or FML32 field id could not be found for the SDO member indicated while converting a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Verify that the FML or FML32 environment is set properly, or that the binding.atmi/fieldTablesLocation(32) and binding.atmi/fieldTables(32) are spec ified in SCDL configuration.
See Also
SALT SCA Administration Guide.
221
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
222
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
223
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
224
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
225
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
226
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
227
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
228
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
See Also
229
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
230
ERROR: Unknown data type type
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
231
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
232
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
233
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
234
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
235
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
236
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
237
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
238
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
239
ERROR: Fchg failed for field identifier error errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
240
ERROR: Unknown data type type
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
241
ERROR: Cannot add FLD_FML32 field to buffer: errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
242
ERROR: Cannot add FLD_VIEW32 field to buffer: errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
243
ERROR: Cannot add FLD_FML32 field to buffer: errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
244
ERROR: Invalid containment type for property propertyname
Description
A commonj::sdo::DataObject
member has been declared of type 'containment', but the corresponding Tuxedo FML32 field is not FLD_FML32 or FLD_VIEW32.
Action
Verify that the field table definitions match the commonj::sdo::DataObject
definition.
See Also
SALT SCA Programming Guide.
245
ERROR: Cannot add FLD_FML32 field to buffer: errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
246
ERROR: Cannot add FLD_VIEW32 field to buffer: errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
247
ERROR: Cannot add FLD_FML32 field to buffer: errormessage
Description
An internal error occurred when transforming a commonj::sdo::DataObjectPtr
object to a Tuxedo FML or FML32 buffer.
Action
Contact Oracle Technical Support.
248
ERROR: Invalid containment type for property propertyname
Description
A commonj::sdo::DataObject
member has been declared of type 'containment', but the corresponding Tuxedo FML32 field is not FLD_FML32 or FLD_VIEW32.
Action
Verify that the field table definitions match the commonj::sdo::DataObject
definition.
See Also
SALT SCA Programming Guide.
249
ERROR: SCA Containment fields not supported for 16-bit FML
Description
A commonj::sdo::DataObject
member has been declared of type 'containment', but the corresponding Tuxedo buffer type configured is of type FML.
Action
Verify that the SCDL configuration matches the desired commonj::sdo::DataObject
type.
See Also
SALT SCA Programming Guide.
250
ERROR: Cannot convert SDO typemember name to Tuxedo type type for name member in view viewname
Description
A discrepancy has been found between Tuxedo VIEW/VIEW32 settings and commonj::sdo::DataObject
definitions.
Action
Verify that the VIEW/VIEW32 environment settings are correct (VIEWDIR/VIEWDIR32/VIEWFILES/VIEWFILES32) or that the binding.atmi elements commonj::sdo::DataObject
.
251
ERROR: Cannot find view viewname
Description
During data transformation, the view or view32 file indicated could not be found or is invalid.
Action
Verify the VIEW/VIEW32 SCDL settings, or that the VIEW/VIEW32 environment variables are set.
252
ERROR: Fvsinit() failed for view viewname
Description
An internal error occurred while attempting to transform from a commonj::sdo::DataObject
to a Tuxedo VIEW or VIEW32 buffer.
Action
Contact Oracle Technical Support.
253
ERROR: Cannot find member name in view viewname
Description
An internal error occurred while attempting to transform from a commonj::sdo::DataObject
to a Tuxedo VIEW or VIEW32 buffer.
Action
Contact Oracle Technical Support.
254
ERROR: Unknown SDO data type typename
Description
An internal error occurred while attempting to transform from a commonj::sdo::DataObject
to a Tuxedo VIEW or VIEW32 buffer.
Action
Contact Oracle Technical Support.
255
ERROR: Unknown SDO data type typename
Description
An internal error occurred while attempting to transform from a commonj::sdo::DataObject
to a Tuxedo VIEW or VIEW32 buffer.
Action
Contact Oracle Technical Support.
256
ERROR: Containment fields should not occur for VIEW/VIEW32
Description
A commonj::sdo::DataObject
member has been declared of type 'containment', but the corresponding Tuxedo buffer type used is VIEW or VIEW32.
Action
Make sure that the commonj::sdo::DataObject
used does not contain nested types.
See Also
SALT SCA Programming Guide.
257
ERROR: Cannot find view viewname
Description
During data transformation, the view or view32 file indicated could not be found or is invalid.
Action
Verify the VIEW/VIEW32 SCDL settings, or that the VIEW/VIEW32 environment variables are set.
261
ERROR: ATMI Binding - locationtype does not exist: location
Description
While validating
Action
Ensure that the
262
ERROR: ATMI Binding - locationtype is not a directory: location
Description
While validating
Action
Ensure that the
263
ERROR: ATMI Binding - cannot find files specified in locationtype
Description
While validating
Action
Ensure that the
264
ERROR: ATMI Binding - the file filename specified in locationtype corresponds to a directory
Description
While validating
Action
Ensure that the
265
ERROR: ATMI Binding - the file filename specified in locationtype does not exist in directory
Description
While validating
Action
Ensure that the
266
ERROR: ATMI Binding - the file filename specified in locationtype does not exist in directory
Description
While validating
Action
Ensure that the
267
ERROR: ATMI Binding - generate decryption key failed for security principal password identifier identifier
Description
An internal error occurred while attempting to initialize the encryption subsystem.
Action
Contact Oracle Technical Support.
268
ERROR: ATMI Binding - decryption failed for security principal password identifier identifier
Description
An internal error occurred while attempting to use the encryption subsystem.
Action
Contact Oracle Technical Support.
269
ERROR: ATMI Binding - workStationParameters/secPrincipalPassword too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
270
ERROR: ATMI Binding - invalid password entry for security principal password identifier identifier
Description
A security principal identifier has been used, but no password has been found.
Action
Ensure that the security principal has a corresponding password set.
See Also
scapasswordtool
271
ERROR: ATMI Binding - workStationParameters/encryptBits has wrong format
Description
The format of the indicated parameter is incorrect.
Action
Verify that the format of the indicated parameters is valid.
See Also
SALT SCA Administration Guide.
272
ERROR: ATMI Binding - workStationParameters/encryptBits has no min value
Description
The format of the indicated parameter is incorrect.
Action
Verify that the format of the indicated parameters is valid.
See Also
SALT SCA Administration Guide.
273
ERROR: ATMI Binding - workStationParameters/encryptBits has no max value
Description
The format of the indicated parameter is incorrect.
Action
Verify that the format of the indicated parameters is valid.
See Also
SALT SCA Administration Guide.
274
ERROR: ATMI Binding - user password returned by callback too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
275
ERROR: ATMI Binding - authentication/userpassword too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
276
ERROR: ATMI Binding - problem decrypting password for user password identifier
Description
A user password identifier has been used, but no password has been found.
Action
Ensure that the security principal has a corresponding password set.
See Also
scapasswordtool
277
ERROR: ATMI Binding - problem allocating internal init buffer: errormessage
Description
An internal error occurred while attempting to initialize the ATMI binding.
Action
Contact Oracle Technical Support.
278
ERROR: ATMI Binding - authentication/username too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
279
ERROR: ATMI Binding - authentication/clientname too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
280
ERROR: ATMI Binding - password returned by callback too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
281
ERROR: ATMI Binding - authentication/password too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
282
ERROR: ATMI Binding - problem decrypting password for password identifier identifier
Description
A password identifier has been used, but no password has been found.
Action
Ensure that the security principal has a corresponding password set.
See Also
scapasswordtool
283
ERROR: ATMI Binding - authentication/groupname too long
Description
The length of the parameter indicated is too long.
Action
Ensure that the length of the parameter is less than MAXTIDENT
.
See Also
TUXDIR/include/atmi.h
284
ERROR: ATMI Binding - tpinit failed: errormessage
Description
An error occurred when initializing the connection with the Tuxedo application.
Action
Additional information is also displayed with this message.
See Also
tpinit(3c)
285
ERROR: Problem parsing method signature
Description
An internal error occurred while performing an SCA operation.
Action
Contact Oracle Technical Support.
286
ERROR: Input buffer type type incompatible with multiple parameter signature
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.
287
ERROR: Input buffer type type incompatible with parameter type type
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.
288
ERROR: Input buffer type type incompatible with multiple parameter signature
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.
289
ERROR: Input buffer type type incompatible with parameter type type
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.
290
ERROR: Input buffer type type incompatible with parameter type type
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.
291
ERROR: ATMI Binding - Syntax error in buffertype input buffer specification
Description
An error was detected when parsing a VIEW or VIEW32 buffer type specification.
Action
Correct the buffer specification.
See Also
SALT SCA Programming Guide.
292
ERROR: ATMI Binding - Syntax error in buffertype input buffer specification
Description
An error was detected when parsing a VIEW or VIEW32 buffer type specification.
Action
Correct the buffer specification.
See Also
SALT SCA Programming Guide.
293
ERROR: ATMI Binding - buffer type not supported: value
Description
An invalid buffer type specification has been entered.
Action
Correct the buffer specification.
See Also
ATMI binding element reference.
294
ERROR: ATMI Binding - error suspending transaction errormessage
Description
An internal error has been detected during transaction processing.
Action
Contact Oracle Technical Support.
295
ERROR: Output buffer type buffertype incompatible with return type returntype
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.
296
ERROR: Problem allocating output MBSTRING buffer
Description
An internal error occurred while attempting to allocate an output buffer.
Action
Contact Oracle Technical Support.
297
ERROR: Problem allocating output MBSTRING buffer
Description
An internal error occurred while attempting to allocate an output buffer.
Action
Contact Oracle Technical Support.
298
ERROR: Output buffer type buffertype incompatible with return type returntype
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.
299
ERROR: Output buffer type buffertype incompatible with return type returntype
Description
A discrepancy between the operation signature and buffer type has been detected.
Action
Verify that the buffer type defined in the binding.atmi element in SCDL is compatible with the method being invoked.
See Also
SALT SCA Programming Guide.