WSCMD Messages 1300-1399
1300
ERROR: Unlicensed System Binary
Description
A valid license file has not been installed in $TUXDIR/udataobj/lic.txt. This license file must have a section for SALT with the specific version number..
Action
Buy a license and install the provided file in udataobj/lic.txt.
1301
ERROR: Expired System Binary
Description
Your copy of the BEA SALT software is an evaluation copy, and the expiration date has passed.
Action
If you wish to continue using the BEA SALT, contact the company from which you received the product.
1302
ERROR: Invalid option: option
Description
wsadmin
(1) has been invoked with an invalid option. The offending option is printed with this error message.
Action
Verify options to wsadmin
and re-execute the command.
See Also
wsadmin
(1)
1303
ERROR: Invalid argument: argument
Description
wsadmin
(1) has been invoked with an invalid argument. The offending option and argument are printed with this error message.
Action
Verify options to wsadmin
and re-execute the command.
See Also
wsadmin
(1)
1304
ERROR: TUXCONFIG environment variable not set.
Description
The TUXCONFIG environment variable was not set. wsadmin
command failed.
Action
Set the TUXCONFIG environment variable to the pathname of the TUXCONFIG file.
See Also
wsadmin
(1)
1305
ERROR: TUXCONFIG must be an absolute pathname.
Description
When executing wsadmin
, the TUXCONFIG
environment variable is not a rooted (full) pathname.
Action
Re-set the TUXCONFIG
value to a rooted path for the ubb configuration file.
See Also
wsadmin
(1)
1306
Usage: wsadmin [-r] [-v]
Description
Invalid use of wsadmin
.
Action
Follow the "Usage:" hint.
See Also
wsadmin
(1)
1307
ERROR: Error while obtaining the Bulletin Board parameters
Description
An error was produced in wsadmin
while retrieving the Bulletin Board parameters. A more specific error explaining the situation should already exist in the user log.
Action
Check the user log for a more specific error message. Check that the TUXCONFIG is readable, and re-execute the wsadmin
command.
See Also
wsadmin
(1)
1308
ERROR: Could not determine level of authentication required.
Description
When wsadmin
starts up, it calls tpchkauth
(3c) to see what level of authentication is required by the application. This message is issued when tpchkauth
(3c) fails. tpchkauth
(3c) can fail if wsadmin
cannot find the TUXCONFIG
file.
Action
Make sure the TUXCONFIG
environment variable is set correctly.
See Also
wsadmin
(1)
1309
ERROR: Could not allocate internal TPINIT typed buffer.
Description
Executing the wsadmin
command error. An error was encountered while trying to obtain virtual memory for the TPINIT
buffer.
Action
Attempt to identify and stop any extraneous processes to free up virtual memory on your system, and then retry the command.
See Also
wsadmin
(1)
1310
ERROR: Could not find entry for user UID.
Description
When wsadmin
is invoked, the invoker's login ID is used as the "User Name" when wsadmin
joins the application. If there is an error retrieving the invoker's login ID from the system password file, this message is printed.
Action
Contact your system administrator to ensure that your password entry contains your user ID (UID) and your login.
See Also
wsadmin
(1)
1312
ERROR: Unable to obtain application password.
Description
If an application password is required, wsadmin
either prompts for it (if the invoker is attached to a terminal), or it reads it from the environment variable, APP_PW
, if standard input is not a terminal. This message is issued when the password cannot be obtained. The most common cause for this is that APP_PW
is not set and standard input is not a terminal.
Action
If wsadmin
is not attached to a terminal when invoked, then check that the environment variable, APP_PW
, is set correctly.
See Also
wsadmin
(1)
1313
ERROR: can't become a client - tpinit() failed - string
Description
Execution of wsadmin
failed because the user could not join the application. The printed string indicates the reason for the failure. This message can be printed either because no more clients can join the application or because the user failed security permissions.
Action
If the reason is that no more clients can join the application, re-try the operation a later time. The system should be configured to allow for more clients.
See Also
wsadmin
(1)
1316
WARN: Cannot become administrator.
Description
The wsadmin
program was not able to enter the administrative mode. A limited set of commands is available (that is, the set of commands available when wsadmin
is run with the -r option).
Action
No action required.
See Also
wsadmin
(1)
1319
ERROR: Error executing string.
Description
A command was given to wsadmin
that was to be executed by the shell. An error was encountered by the shell in executing the command.
Action
Retry the command. If it continues to fail, refer to the system
(3S) manual page for reasons why the command may have failed.
See Also
system
(3S) in UNIX reference manuals
1320
ERROR: -char option: argument must be numeric.
Description
When the -char option is used as an argument to the wsadmin
sub-command, its argument must be a numeric value.
Action
Try the command again with the numeric value for the char option.
See Also
wsadmin
(1)
1326
ERROR: Can't allocate memory. (IC=code)
Description
wsadmin
detected an error while trying to process the operation specified by the value code. The process was unable to obtain enough virtual memory. The value code is an internal error code for use in diagnosis.
Action
Attempt to identify and stop any extraneous processes to free up virtual memory on your system.
See Also
wsadmin
(1)
1327
ERROR: Can't perform the operation. Please check the ULOG for more descriptive message. (IC=code)
Description
wsadmin
detected an error while trying to process the operation specified by the value code. The process was unable to perform the operation. The value code is an internal error code for use in diagnosis. The ULOG
will contain more specific information.
Action
Check the ULOG
for more specific information on the cause of the error. Correct the cause of the error and retry the operation.
See Also
wsadmin
(1)
1328
ERROR: gwws_instance_id value is not valid
Description
The gwws_instance_id given to the wsadmin
sub-command is not valid.
Action
Please refer to SALTCONFIG
for the syntax of GWWS instance id value.
See Also
wsadmin
(1), BEA SALT Administration Guide
1329
ERROR: gwws instance is not present
Description
wsadmin
detected the specified GWWS
instance is not available. Either the GWWS
process is not configured in the UBBCONFIG, or the process is not booted.
Action
Check if the specified GWWS instance is configured in the SALTCONFIG
as well as in the UBBCONFIG
. If not, please refer to BEA SALT administration Guide to configure the desired GWWS instance properly. If your configuration is correct, please check if the specified GWWS
process is down. Start it using Tuxedo administrative command if necessary.
See Also
BEA SALT Administration Guide
, wsadmin
(1), GWWS
(1)
1330
ERROR: call gwws service error(tperrno=code)
Description
wsadmin
detected an error while trying to invoke the specified GWWS
process. The value code indicates the tperrno
of the invocation.
Action
Check if the specified GWWS
process is started and the status is healthy. Check the meaning of the tperrno
value to help diagnose the process' status.
See Also
wsadmin
(1), GWWS
(1)