CMDTUX Messages 6400-6499
|
|
6401
ERROR: MAXTRANTIME parameter must be > 0 and <= 2147483647
Description
Action
6403
ERROR: MAXSPDATA parameter must be >= 0 and <= 2147483640
Description
Action
6451
ERROR: BRIDGE Internal thread coordination error
Description
Internal problem while initializing threaded BRIDGE (BRTHREADS=Y).
Action
Contact BEA Customer Support with information about your environment.
6452
INFO: Threaded BRIDGE: Thread contention scope=contention_scope
Description
This is informational to indicate the BRIDGE is booted in threaded mode (BRTHREADS=Y). The thread contention scope is always "system" and indicates that the BRIDGE uses kernel-level threads as opposed to process-level threads.
Action
No action required.
6453
ERROR: Thread coordination error
Description
Internal problem while initializing threaded BRIDGE (BRTHREADS=Y).
Action
Contact BEA Customer Support with information about your environment.
6454
ERROR: Threaded BRIDGE received unexpected signal
Description
This error is specific to the BRIDGE operating in threaded mode. Signals are not used in the functioning of the threaded BRIDGE and are normally masked by the BRIDGE threads. The error message would be triggered if a BRIDGE thread detects an unexpected signal sent to it.
Action
Check for any processes that accidentally send signals to the BRIDGE process. Contact BEA Customer Support with information about your environment.
6455
ERROR: Threaded BRIDGE handling incoming connection handshake(node)
Description
The threaded BRIDGE encountered an unexpected internal error while establishing a connection with a remote BRIDGE.
Action
Contact BEA Customer Support with information about your environment and with the value of node.
6456
ERROR: Threaded BRIDGE error on sending saved messages to LMID
Description
The threaded BRIDGE encountered an unexpected internal error while processing some temporarily buffered messages.
Action
Contact BEA Customer Support with information about your environment and with the value of LMID.
6457
ERROR: Threaded BRIDGE error on sending saved messages to LMID
Description
The threaded BRIDGE encountered an unexpected internal error while processing some temporarily buffered messages.
Action
Contact BEA Customer Support with information about your environment and with the value of LMID.
6458
ERROR: Threaded BRIDGE error during encryption negotiation with LMID
Description
The threaded BRIDGE encountered an unexpected internal error during encryption handshake while setting up a connection with a remote BRIDGE.
Action
Contact BEA Customer Support with information about your environment and with the value of LMID.
6459
ERROR: memory allocation failed
Description
The system does not have enough memory for the threaded BRIDGE to build a response to a MIB query for statistics.
Action
Check system memory usage. Contact BEA Customer Support with information about your environment.
6460
ERROR: Threaded BRIDGE internal error shutdown
Description
Threaded BRIDGE encountered a serious internal error and is shutting down.
Action
Contact BEA Customer Support with information about your environment.
6461
WARN: Threaded BRIDGE unexpected thread doing internal shutdown
Description
Threaded BRIDGE encountered an internal thread coordination problem while shutting down. But the BRIDGE should shut down safely.
Action
Report to BEA Customer Support with information about your environment.
6462
INFO: Threaded BRIDGE exiting system
Description
This is informational to indicate that the threaded BRIDGE is shutting down normally.
Action
No action required.
6463
ERROR: Thread creation failed
Description
The threaded BRIDGE failed while attempting to create threads.
Action
Check system thread resources and tunables. Contact BEA Customer Support with information about your environment.
6464
ERROR: Thread creation failed
Description
The threaded BRIDGE failed while attempting to create threads.
Action
Check system thread resources and tunables. Contact BEA Customer Support with information about your environment.
6465
ERROR: Message queue read failed
Description
Threaded BRIDGE encountered an internal error while reading its message queue and will be shutting down.
Action
Re-try the desired operation. Check system IPC resource utilization. If the problem persists, contact your BEA Customer Support.
6466
ERROR: Network polling failed
Description
Threaded BRIDGE encountered an internal error while polling the network and will be shutting down.
Action
Re-try the desired operation. Check network interface and network configuration. If the problem persists, contact your BEA Customer Support.
6467
ERROR: Timed conditional variable wait error
Description
Threaded BRIDGE encountered an internal error while coordinating its threads using a conditional variable. BRIDGE will be shutting down.
Action
Check system thread resources and tunables. Contact BEA Customer Support with information about your environment.
6468
ERROR: Failed coordinating thread shutdown
Description
Threaded BRIDGE encountered an internal error while coordinating (joining) its threads while shutting down.
Action
Check system thread resources and tunables. Contact BEA Customer Support with information about your environment.
6469
ERROR: Failed coordinating thread shutdown
Description
Threaded BRIDGE encountered an internal error while coordinating (joining) its threads while shutting down.
Action
Check system thread resources and tunables. Contact BEA Customer Support with information about your environment.
6470
ERROR: BRIDGE Memory allocation failure
Description
The system does not have enough memory to allocate to the threaded BRIDGE.
Action
Check system memory usage. Contact BEA Customer Support with information about your environment.
6471
ERROR: BRIDGE Host mutex initialization failure host(node)
Description
The threaded BRIDGE could not create a mutex.
Action
Check system resource tunables. If problem persists, contact BEA Customer Support with information about your environment.
6472
ERROR: Threaded BRIDGE limit on per-host connections reached
Description
Threaded BRIDGE encountered an internal limit that would not be crossed under normal scenarios.
Action
Contact BEA Customer Support with information about your environment.
6473
ERROR: Internal thread error mutex:error_type:file:line
Description
Threaded BRIDGE encountered an unexpected internal error, possibly timing related. The message contains information to aid BEA Customer Support.
Action
Contact BEA Customer Support with the error message and information about your environment.
6474
ERROR: Threaded BRIDGE internal error handing incoming network message
Description
Threaded BRIDGE encountered an internal error while receiving a message from the network.
Action
Contact BEA Customer Support with information about your environment.
6475
ERROR: Threaded BRIDGE internal error handling incoming encrypted network message
Description
Threaded BRIDGE encountered an internal error while decrypting a message received from the network.
Action
Contact BEA Customer Support with information about your environment.
6476
ERROR: Threaded BRIDGE internal error handling out of sequence incoming encrypted network message
Description
Threaded BRIDGE encountered an internal error while decrypting multiple messages received from the network.
Action
Contact BEA Customer Support with information about your environment.
6477
ERROR: Connection setup error
Description
BRIDGE encountered an error while allocating an internal network file descriptor for connection setup.
Action
Contact BEA Customer Support with information about your environment.
6478
ERROR: Could not find machine section
Description
BRIDGE could not read the configuration for BRTHREADS in the machine section of the TUXCONFIG file.
Action
Check the TUXCONFIG environment variable. Check that the file pointed to by TUXCONFIG has correct permissions. Check that the TUXCONFIG file is not corrupted, using tmunloadcf(5).
6479
ERROR: Could not find LMID lmid in machine section
Description
BRIDGE could not correctly read the configuration for BRTHREADS in the machine section of the TUXCONFIG file.
Action
Check the TUXCONFIG environment variable. Check that the file pointed to by TUXCONFIG has correct permissions. Check that the TUXCONFIG file is not corrupted, using tmunloadcf(5).
6480
WARN: TMNOTHREADS conflicts with BRTHREADS, ignoring TMNOTHREADS
Description
This is informational, but categorized as a warning to highlight that if the TMNOTHREADS environment variable is set in conflict with BRTHREADS, TMNOTHREADS will have no effect on whether the BRIDGE operates in threaded mode or not.
Action
No action required.
See Also
tuxenv(5)
6481
INFO: Configuration file version already specified, replace it with new file version <ver>
Description
This is informational. The LAUTHSVR configuration file contains version for the file format supported by LAUTHSVR. The configuration file contains more than one entries for the file format version. The version specified later will be used to parse the remaining of the configuration file.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6482
ERROR: Only support LDAP protocol version 2 or 3
Description
The LDAP protocol version specified in the LAUTHSVR configuration file is not supported.
Action
Modify the LDAP protocol version to the one that is supported.
See Also
LAUTHSVR(5)
6483
INFO: LDAP protocol version already specified, replace it with new version <ver>
Description
This is informational. The LAUTHSVR configuration file contains LDAP protocol version information for it to communicate with LDAP server. The configuration file contains more than one entries for the LDAP protocol version. The version specified later will be used to communicate with LDAP server.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6484
INFO: LDAP bind DN already specified, replace it with new bind DN <dn>
Description
This is informational. The LAUTHSVR configuration file contains distinguish name of the LDAP administrator to be used to communicate with LDAP server. The configuration file contains more than one entries for LDAP administrator DN. The DN specified later will be used to communicate with LDAP server.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6485
ERROR: Memory allocation failure
Description
The system does not have enough memory to handle the LAUTHSVR configuration file.
Action
Check system memroy usage, if problem persist contact your BEA Customer Support.
See Also
LAUTHSVR(5)
6486
INFO: Search base already specified, replace it with new search base
Description
This is informational. The LAUTHSVR configuration file contains search base for looking up directory information tree in the LDAP server. The configuration file contains more than one entries for this information tree search base. The search base specified later will be used to search the directory information tree.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6487
ERROR: Memory allocation failure
Description
The system does not have enough memory to handle the LAUTHSVR configuration file.
Action
Check system memroy usage, if problem persist contact your BEA Customer Support.
See Also
LAUTHSVR(5)
6488
INFO: LDAP uid attribute name already specified, replace it with new name <uid-name>
Description
This is informational. The LAUTHSVR configuration file allows using a different LDAP user identification attribute name. The configuration file contains more than one entries for the uid attribute name. The uid name specified later will be used to retrieve the LDAP user information.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6489
ERROR: Memory allocation failure
Description
The system does not have enough memory to handle the LAUTHSVR configuration file.
Action
Check system memroy usage, if problem persist contact your BEA Customer Support.
See Also
LAUTHSVR(5)
6490
INFO: LDAP bind DN password already specified, replace it with new password
Description
This is informational. The LAUTHSVR configuration file contains password for the LDAP administrator for log in to the LDAP server. The configured configuration file contains more than one entries for password. The passwrd specified later will be used to log in to the LDAP server.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6491
ERROR: Memory allocation failure
Description
The system does not have enough memory to handle the LAUTHSVR configuration file.
Action
Check system memroy usage, if problem persist contact your BEA Customer Support.
See Also
LAUTHSVR(5)
6492
ERROR: None numeric value (val) specified for cache expiration
Description
The LAUTHSVR configuration allows user to specify how long an user record will be cached in the memory. The tag name for this attribute is called EXPIRE. The EXPIRE only accept numerical value from 0 to 2147483647.
Action
Correct the problem and reboot the LAUTHSVR server.
See Also
LAUTHSVR(5), tmboot(1)
6493
INFO: Cache expiration time already specified, replace it with new expiration <exp-time>
Description
This is informational. The LAUTHSVR configuration file allows user to specify how long an user record will cached in the memory. The configuration file contains more than one entries for the cache expiration time. The expiration time specified later will be used.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6494
ERROR: Unsupported search order "srch_order"
Description
The user specified an unsupported SRCH_ORDER option. The SRCH_ORDER in the LAUTHSVR configuration file only accept values LDAP, LOCAL, or combination of these 2 options.
Action
Correct the configuration error, and reboot the LAUTHSVR.
See Also
LAUTHSVR(5), tmboot(1)
6495
INFO: Database search order already specified, replace it with new order <srch-order>
Description
This is informational. The LAUTHSVR configuration file allows user to specify the search order of the database. The configuration file contains more than one entries for the database search order. The search order specified later will be used.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6496
INFO: Local tpusr file already specified, replace it with new tpusr file <filename>
Description
This is informational. The LAUTHSVR configuration file allows user to specify the file name of the Tuxedo TPUSR file. The configuration file contains more than one entries for tpusr file. The version specified later will be used to parse the remaining of the configuration file.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6497
ERROR: Memory allocation failure
Description
The system does not have enough memory to handle the LAUTHSVR configuration file.
Action
Check system memroy usage, if problem persist contact your BEA Customer Support.
See Also
LAUTHSVR(5)
6498
INFO: WLS Domain name already specified, replace it with new Domain name <wls-dom>
Description
This is informational. The LAUTHSVR configuration file allows user to specify which WLS domain will be used as LDAP server. The configuration file contains more than one entries for the WLS Domain name. The domain name specified later will be used.
Action
Remove the duplicated entry from the LAUTHSVR configuration file.
See Also
LAUTHSVR(5)
6499
ERROR: Only support file version 1
Description
Currently, the LAUTHSVR only support configuration file specification version 1.
Action
Correct the configuration and reboot the LAUTHSVR.
See Also
LAUTHSVR(5), tmboot(1)
 |
 |
 |