1. Installing and Maintaining a SCSI RAID Storage Device
Sun StorEdge A1000 and Netra st A1000 Cabling Diagrams
Installing a Sun StorEdge A1000 or Netra st A1000 Storage Array
Figure A-3 Installing a StorEdge A3500 Storage System: An Example
For more sample configurations, see the Sun StorEdge A3500/A3500FC Hardware Configuration Guide.
For the procedure about how to install the cables, see the Sun StorEdge A3500/A3500FC Controller Module Guide.
Connect the differential SCSI cable between the node and the controller module, as shown in Figure A-4. Ensure that the entire SCSI bus length to each storage array is less than 25 m. This measurement includes the cables to both nodes, as well as the bus length that is internal to each storage array, node, and host adapter.
Figure A-4 Cabling a StorEdge A3500 Storage System: An Example, Part 1
Figure A-5 Cabling a StorEdge A3500 Storage System: An Example, Part 2