Skip Navigation Links | |
Exit Print View | |
Solaris Trusted Extensions Installation and Configuration for Solaris 10 11/06 and Solaris 10 8/07 Releases |
1. Security Planning for Trusted Extensions
2. Installation and Configuration Roadmap for Trusted Extensions
3. Installing Solaris Trusted Extensions Software (Tasks)
4. Configuring Trusted Extensions (Tasks)
5. Configuring LDAP for Trusted Extensions (Tasks)
6. Configuring a Headless System With Trusted Extensions (Tasks)
B. Using CDE Actions to Install Zones in Trusted Extensions
Associating Network Interfaces With Zones by Using CDE Actions (Task Map)
Specify Two IP Addresses for the System by Using a CDE Action
Preparing to Create Zones by Using CDE Actions (Task Map)
Specify Zone Names and Zone Labels by Using a CDE Action
Creating Labeled Zones by Using CDE Actions (Task Map)
Install, Initialize, and Boot a Labeled Zone by Using CDE Actions
Customize a Booted Zone in Trusted Extensions
Use the Copy Zone Method in Trusted Extensions
Use the Clone Zone Method in Trusted Extensions
In this configuration, the host's address applies to all the zones, including the labeled zones.
You are superuser in the global zone. You are in a Trusted CDE workspace.
This folder contains actions that set up interfaces, LDAP clients, and labeled zones.
This action configures a host with one IP address. The global zone does not have a unique address. This system cannot be used as a multilevel print server or NFS server.
# ifconfig -a
The Share Physical Interface action configures all zones to have logical NICs. These logical NICs share a single physical NIC in the global zone.
For example, the following output shows the shared physical interface, hme0 on network interface 192.168.0.11 for all the zones.
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 ether 0:0:00:00:00:0 hme0: flags=1000843<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 all-zones inet 192.168.0.11 netmask fffffe00 broadcast 192.168.0.255