Static NAT

Registered addresses are necessary for advertised kinds of resources, such as publicly accessible servers on your network, because these machines must be at well-known, fixed addresses. Static NAT is frequently used to provide public access to HTTP or FTP servers that use private addresses. These servers must use static NAT reverse rules so that other hosts can use the same registered addresses to reach them, so the reverse rules must be generated by you.

One-to-One Translations

Use static NAT rules to make one-to-one translations between either single pair or multiple pairs of addresses. Most commonly, static NAT rules are used to translate an advertised address for a public server to a different address.

A static NAT rule translates either the source or destination addresses in a packet. In most cases, this means that you will need to define two NAT rules:

1. One to translate the source address when the packet is flowing in one direction.

2. A second rule to translate the destination address when packets are flowing in the other direction.

• Example of Static NAT Rules in One-to-One Translation

  Assume that your public web server has an address of 10.0.0.1 (defined by the address object "private_www") and you want to allow access to this web server through the public address 199.190.177.1 (defined by the address object "public_www"). Assume also that the address Internet represented the Internet addresses.

  To do this requires two static NAT rules, as shown in TABLE 7-1:

  1. The first rule specifies that the destination address public_www (199.190.177.1) is the translated destination address private_www (10.0.0.1). This NAT rule handles packets flowing to the web server.

  2. The second rule specifies that the source address private_www (10.0.0.1) is the translated source address public_www (199.190.177.1). This NAT rule handles packets flowing from the web server.

     Table 7-1 Static NAT Rules

     Type of NAT Rule	Source	Destination	Translated Source	Translated Destination	Comment
     STATIC	"Internet"	"public_www"	"Internet"	"private_www"	Packets to server
     STATIC	"private_www"	"Internet"	"public_www"	"Internet"	Packets from server

     ---

     Note -

     The order of the addresses is reversed in the two rules.

     ---

Address Range to Another Address Range

You also can use Static translations to translate a range of unregistered addresses to a range of registered addresses. Each range of addresses must contain the same number of addresses.

• Example of Static NAT Rule with a Range of Addresses

  You can translate the address range containing 199.190.177.1 through 199.190.177.100 to an address range containing 10.0.0.1 through 10.0.0.100 since both ranges contain 100 addresses. In this example, 199.190.177.1 translates to 10.0.0.1, 199.190.177.2 translates to 10.0.0.2, ending with 199.190.177.100 translating to 10.0.0.100.