This section describes how to modify the terminal configuration to allow a PPP connection without login.
Start admintool.
Select Serial Ports from the Browse menu.
Double-click the port to use for PPP.
Click the Expert radio button in the Detail field.
Use the hints in the table below to set options for the port.
Field |
State/Value |
---|---|
Service Enable |
Selected |
Baud Rate |
9600 |
Initialize Only |
Not selected |
Bidirectional |
Selected |
Software Carrier |
Selected |
Port Monitor Tag |
zsmon |
Connect on Carrier |
Selected |
Service |
/usr/sbin/aspppls |
Streams Modules |
ldterm,ttcompat |
Timeout (secs) |
Never |