Table 2-1 gives the profile and board dependent components (such as BSP, boot and family specific driver code) to be used with the configure command. The PATHs are given relative to <src_dir>.
Table 2-1 List of board dependent componentsPaths | Component |
PowerPC Board | |
nucleus/ppc60x/ppc60x | profile |
nucleus/bsp/powerpc/genesis2 | bsp |
nucleus/bsp/powerpc | driver family |
MCP750 board | |
nucleus/ppc60x/ppc60x | profile |
nucleus/bsp/powerpc/mcp750 | bsp |
nucleus/bsp/powerpc | driver family |
SBC8260 board | |
nucleus/mpc8260/mpc8260 | profile |
nucleus/bsp/powerpc/sbc8260 | bsp |
nucleus/bsp/powerpc | driver family |
MPC860 board | |
nucleus/mpc860/mpc860 | profile |
nucleus/bsp/powerpc/mpc8xxADS | bsp |
nucleus/bsp/powerpc | driver family |
CP1500 board | |
nucleus/usparc/usparc | profile |
nucleus/bsp/usparc/cp1500 | bsp |
nucleus/bsp/usparc | driver family |
i386AT board | |
nucleus/x86/x86 | profile |
nucleus/bsp/x86/i386at | bsp |
nucleus/bsp/x86 | driver family |
All examples given in this document are for the PowerPC family and the genesis2 board. For further information on the family and board that you are using, refer to the ChorusOS 4.0 Target Family Documentation Collection.