Terminal Concentrator and System Service Processor FAQ

• Does Sun Cluster require a terminal concentrator?

  Sun Cluster 3.0 does not require a terminal concentrator to run. Unlike the Sun Cluster 2.2 product, which required a terminal concentrator for failure fencing, Sun Cluster 3.0 does not depend on the terminal concentrator.

• I see that most Sun Cluster servers use a terminal concentrator, but the E10000 does not. Why is that?

  The terminal concentrator is effectively a serial-to-Ethernet converter for most servers. Its console port is a serial port. The Sun Enterprise E10000 server doesn't have a serial console. The System Service Processor (SSP) is the console, either through an Ethernet or jtag port. For the Sun Enterprise E10000 server, you always use the SSP for consoles.

• What are the benefits of using a terminal concentrator?

  Using a terminal concentrator provides console-level access to each node from a remote workstation anywhere on the network, including when the node is at the OpenBoot PROM (OBP).

• If I use a terminal concentrator not supported by Sun, what do I need to know to qualify the one that I want to use?

  The main difference between the terminal concentrator supported by Sun and other console devices is that the Sun terminal concentrator has special firmware that prevents the terminal concentrator from sending a break to the console when it boots. Note that if you have a console device that can send a break, or a signal that might be interpreted as a break to the console, it shuts down the node.

• Can I free a locked port on the terminal concentrator supported by Sun without rebooting it?

  Yes. Note the port number that needs to be reset and do the following:

  telnet tc Enter Annex port name or number: cli annex: su - annex# admin admin : reset port_number admin : quit annex# hangup #

  Refer to the Sun Cluster 3.0 System Administration Guide for more information about configuring and administering the terminal concentrator supported by Sun.

• What if the terminal concentrator itself fails? Must I have another one standing by?

  No. You do not lose any cluster availability if the terminal concentrator fails. You do lose the ability to connect to the node consoles until the concentrator is back in service.

• If I do use a terminal concentrator, what about security?

  Generally, the terminal concentrator is attached to a small network used by system administrators, not a network that is used for other client access. You can control security by limiting access to that particular network.