下面的示例显示在节点 phys-schost-1 上创建 镜像 d1 以镜像 /usr(驻留 在 c0t0d0s1 上)。镜像 d1 由 分区 c0t0d0s1 中的子镜像 d11 和分 区 c2t2d0s1 中的子镜像 d21 组成。/usr 的 /etc/vfstab 文件条目更新为使用镜像名称 d1。磁盘 c2t2d0 是一个多端口连接的磁盘,因而启用了 localonly 特性。
(Create the mirror:)
# metainit -f d11 1 1 c0t0d0s1
d11: Concat/Stripe is setup
# metainit -f d21 1 1 c2t2d0s1
d21: Concat/Stripe is setup
# metainit d1 -m d11
d1: Mirror is setup
(Edit the /etc/vfstab file:)
# vi /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
/dev/md/dsk/d1 /dev/md/rdsk/d1 /usr ufs 2 no global
(Reboot the node:)
# scswitch -S -h phys-schost-1
# shutdown -g 0 -y -i 6
(Attach the second submirror:)
# metattach d1 d21
d1: Submirror d21 is attached
(View the sync status:)
# metastat d1
d1: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d21
State: Resyncing
Resync in progress: 15 % done
...
(Identify the DID name of the mirrored disk's raw disk device group:)
# scdidadm -L
...
1 phys-schost-3:/dev/rdsk/c2t2d0 /dev/did/rdsk/d2
(Enable the localonly property of the mirrored disk's raw disk device group:)
# scconf -c -D name=dsk/d2,localonly=true
|