請使用這個程序將將 root(/)檔案系統復原到新磁碟,例如在更換損壞的根磁碟的情況。要復原的節點應該不在啟動狀態。請先確定叢集執行沒任何錯誤再執行復原程序。
由於您必須將新磁碟的分割區製作成和失效磁碟完全相同的格式,請在開啟本程序之前先識別分割機制,同時適當地重新建立檔案系統。
在您要復原之節點以外的節點上成為超級使用者(superuser)。
使用 metaset(1M) 指令,從所有中繼組移除復原之節點的主機名稱。請在中繼組,而不是您要移除的節點,執行這個指令。
# metaset -s setname -f -d -h node |
指定磁碟組名稱。
強迫。
從磁碟組刪除。
指定要從磁碟組刪除之節點的名稱。
置換節點上要復原 root(/)檔案系統的失效磁碟。
請參閱附隨伺服器之文件中敘述的磁碟置換程序。
啟動正在復原的啟動。
如果您使用 Solaris CD-ROM,請執行下列指令:
ok boot cdrom -s |
如果您使用 JumpStartTM 伺服器時,請執行下列指令:
ok boot net -s |
使用 format(1M) 指令,在根磁碟上建立所有的分割區與交換。
重新建立失效磁碟的原始分割機制。
使用 newfs(1M) 指令,建立適當的 root(/)檔案系統以及其他檔案系統。
重新建立失效磁碟的原始檔案系統。
請務必要建立 /global/.devices/node@nodeid 檔案系統。
將 root(/)檔案系統裝載到暫時裝載點。
# mount device temp-mount-point |
使用下列指令來復原 root(/)檔案系統。
# cd temp-mount-point # ufsrestore rvf dump-device # rm restoresymtable # cd / # umount temp-mount-point # fsck raw-disk-device |
檔案系統現在完成復原。
在新磁碟安裝新的啟動區塊。
# /usr/sbin/installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk raw-disk-device |
將節點重新開機為單用戶模式。
# reboot -- "-s" |
使用 scdidadm 指令置換磁碟 ID。
# scdidadm -R rootdisk |
使用 metadb(1M) 指令重新建立狀態資料庫抄本。
# metadb -c copies -af raw-disk-device |
指定要建立的抄本數目。
要在其上建立抄本的原始裝置。
新增抄本。
將節點重新啟動為叢集模式。
在復原的節點以外的叢集節點上,使用 metaset(1M) 指令將復原的節點新增到所有中繼組。
phys-schost-2# metaset -s setname -a -h node |
建立並新增主機到磁碟組。
節點重新啟動為叢集模式。叢集已經備妥可以使用。
以下範例顯示 root(/)檔案系統從磁帶裝置 /dev/rmt/0 復原到節點 phys-schost-1。metaset 指令是從 phys-schost-2 叢集中的另一個節點執行,先移除備份節點 phys-schost-1 稍後再將它加回磁碟組 schost-1。其他所有指令都是從 phys-schost-1 執行。新的啟動區塊將建立在 /dev/rdsk/c0t0d0s0,三個狀態資料庫抄本則是重新建立在 /dev/rdsk/c0t0d0s4。
[Become superuser on a cluster node other than the node to be restored.] [Remove the node from the metaset:] phys-schost-2# metaset -s schost-1 -f -d -h phys-schost-1 [Replace the failed disk and boot the node:] ok boot cdrom -s [Use format and newfs to recreate partitions and file systems.] [Mount the root file system on a temporary mount point:] # mount /dev/dsk/c0t0d0s0 /a [Restore the root file system:] # cd /a # ufsrestore rvf /dev/rmt/0 # rm restoresymtable # cd / # umount /a # fsck /dev/rdsk/c0t0d0s0 [Install a new boot block:] # /usr/sbin/installboot /usr/platform/`uname \ -i`/lib/fs/ufs/bootblk /dev/rdsk/c0t0d0s0 [Reboot in single-user mode:] # reboot -- "-s" [Replace the disk ID:] # scdidadm -R /dev/dsk/c0t0d0 [Recreate state database replicas:] # metadb -c 3 -af /dev/rdsk/c0t0d0s4 # reboot Press CTL-d to boot into multiuser mode. [Add the node back to the metaset:] phys-schost-2# metaset -s schost-1 -a -h phys-schost-1 |