다음 예에서는 c0t0d0s1에 있는 /usr을 이중화하는 d1 미러를 phys-schost-1 노드에 만듭니다. d1 미러는 c0t0d0s1 파티션에 있는 d11 하위 미러와 c2t2d0s1 파티션에 있는 d21 하위 미러로 구성됩니다. d1을 미러 이름으로 사용하도록 /usr에 대한 /etc/vfstab 파일 항목이 갱신됩니다. c2t2d0 디스크는 멀티 포트 디스크이므로 localonly 특성이 활성화됩니다.
(Create the mirror)
# metainit -f d111 1 1 c0t0d0s3
d111: Concat/Stripe is setup
# metainit -f d121 1 1 c2t2d0s3
d121: Concat/Stripe is setup
# metainit d101 -m d111
d101: Mirror is setup
# metattach d101 d121
d101: Submirror d121 is attached
(Edit the /etc/vfstab file)
# vi /etc/vfstab
#device device mount FS fsck mount
mount
#to mount to
fsck point type pass at boot options
#
/dev/md/dsk/d101 /dev/md/rdsk/d101
/global/.devices/node@1 ufs 2 no global
(View the sync status)
# metastat d101
d101: Mirror
Submirror 0: d111
State: Okay
Submirror 1: d121
State: Resyncing
Resync in progress: 15 % done
...
(Identify the DID name of the mirrored disk's raw
disk device group)
# scdidadm -L
...
1 phys-schost-3:/dev/rdsk/c2t2d0 /dev/did/rdsk/d2
(Enable the localonly property of the mirrored disk's
raw disk device group)
# scconf -c -D name=dsk/d2,localonly=true
|