다음 예에서는 c0t0d0s4에 있는 /home을 이중화하여 d4 미러를 만듭니다. d4 미러는 c0t0d0s4 파티션의 d14 하위 미러와 c2t2d0s4 파티션의 d24 하위 미러로 구성됩니다. d4를 미러 이름으로 사용하도록 /home에 대한 /etc/vfstab 파일 항목이 갱신됩니다. c2t2d0 디스크는 멀티 포트 디스크이므로 localonly 특성이 활성화됩니다.
(Create the mirror)
# metainit -f d14 1 1 c0t0d0s4
d14: Concat/Stripe is setup
# metainit -f d24 1 1 c2t2d0s4
d24: Concat/Stripe is setup
# metainit d4 -m d14
d4: Mirror is setup
(Edit the /etc/vfstab file)
# vi /etc/vfstab
#device device mount FS fsck mount mount
#to mount to
fsck point type pass at boot options
#
/dev/md/dsk/d4 /dev/md/rdsk/d4
/home
ufs 2 no
global
(Attach the second submirror)
# metattach d4 d24
d4: Submirror d24 is attached
(View the sync status)
# metastat d4
d4: Mirror
Submirror 0: d14
State: Okay
Submirror 1: d24
State: Resyncing
Resync in progress: 15 % done
...
(Identify the DID name of the mirrored disk's raw
disk device group)
# scdidadm -L
...
1 phys-schost-3:/dev/rdsk/c2t2d0 /dev/did/rdsk/d2
(Enable the localonly property of the mirrored disk's
raw disk device group)
# scconf -c -D name=dsk/d2,localonly=true
|