test

Guide d'administration système de Sun Cluster 3.0 U1

1.4.6 Affichage de la configuration de la grappe

Vous pouvez également exécuter cette procédure avec l'interface GUI de SunPlex Manager. Pour plus d'informations, reportez-vous à l'aide en ligne de SunPlex Manager.

Pour effectuer cette procédure, il n'est pas nécessaire d'être connecté comme superutilisateur.

    Affichez la configuration de la grappe.


    % scconf -p

1.4.6.1 Exemple : affichage de la configuration de la grappe

L'exemple suivant illustre la configuration de la grappe.


% scconf -p
Cluster name:                       cluster-1
Cluster ID:                         0x3908EE1C
Cluster install mode:               disabled
Cluster private net:                172.16.0.0
Cluster private netmask:            255.255.0.0
Cluster new node authentication:    unix
Cluster new node list:              <NULL - Allow any node>
Cluster nodes:                      phys-schost-1 phys-schost-2 phys-schost-3
phys-schost-4
Cluster node name:                                 phys-schost-1
  Node ID:                                         1
  Node enabled:                                    yes
  Node private hostname:                           clusternode1-priv
  Node quorum vote count:                          1
  Node reservation key:                            0x3908EE1C00000001
  Node transport adapters:                         hme1 qfe1 qfe2
 
Node transport adapter:                          hme1
    Adapter enabled:                               yes
    Adapter transport type:                        dlpi
    Adapter property:                              device_name=hme
    Adapter property:                              device_instance=1
    Adapter property:                              dlpi_heartbeat_timeout=10000
...
Cluster transport junctions:                       hub0 hub1 hub2
 
Cluster transport junction:                        hub0
  Junction enabled:                                yes
  Junction type:                                   switch
  Junction port names:                             1 2 3 4
...
Junction port:                                   1
    Port enabled:                                  yes
 
Junction port:                                   2
    Port enabled:                                  yes
...
Cluster transport cables
                    Endpoint            Endpoint        State
                    --------            --------        -----
  Transport cable:  phys-schost-1:hme1@0 hub0@1        Enabled
  Transport cable:  phys-schost-1:qfe1@0 hub1@1        Enabled
  Transport cable:  phys-schost-1:qfe2@0 hub2@1        Enabled
  Transport cable:  phys-schost-2:hme1@0 hub0@2        Enabled
...
Quorum devices:                                    d2 d8
 
Quorum device name:                                d2
  Quorum device votes:                             1
  Quorum device enabled:                           yes
  Quorum device name:                              /dev/did/rdsk/d2s2
  Quorum device hosts (enabled):                   phys-schost-1
 phys-schost-2
  Quorum device hosts (disabled): 
...
Device group name:                                 schost-3
  Device group type:                               SDS
  Device group failback enabled:                   no
  Device group node list:                          phys-schost-3, phys-schost-4
  Diskset name:                                    schost-3