SunPlex Manager GUI를 사용하여 이 절차를 수행할 수도 있습니다. 자세한 내용은 SunPlex Manager 온라인 도움말을 참조하십시오.
이 옵션을 사용하면 기존 클러스터 전송 케이블을 사용할 수 있습니다.
클러스터의 노드에 대해 수퍼유저가 되십시오.
scsetup 유틸리티를 입력하십시오.
# scsetup |
Main Menu가 표시됩니다.
2(클러스터 상호 연결)를 입력하여 클러스터 상호 연결 메뉴에 액세스하십시오.
7(전송 케이블 활성화)을 입력하여 전송 케이블을 활성화하십시오.
화면의 지시를 따르십시오. 식별하려는 케이블의 종단점 중 하나의 노드와 어댑터 이름을 모두 입력해야 합니다.
케이블이 활성화되었는지 확인하십시오.
# scconf -p | grep cable |
이 예는 노드 phys-schost-2에 있는 어댑터 qfe-1에서 클러스터 전송 케이블을 사용하는 방법입니다.
[Become superuser on any node.] [Enter the scsetup utility:] # scsetup Select Cluster interconnect>Enable a transport cable. Answer the questions when prompted. You will need the following information. You Will Need: Example: node names phys-schost-2 adapter names qfe1 junction names hub1 [Verify that the scconf command completed successfully:] scconf -c -m endpoint=phys-schost-2:qfe1,state=enabled Command completed successfully. Quit the scsetup Cluster Interconnect Menu and Main Menu. [Verify that the cable is enabled:] # scconf -p | grep cable Transport cable: phys-schost-2:qfe1@0 ethernet-1@2 Enabled Transport cable: phys-schost-3:qfe0@1 ethernet-1@3 Enabled Transport cable: phys-schost-1:qfe0@0 ethernet-1@1 Enabled |